XTR-240P-24
Stock number: C023539
Manufacturer: MEANWELL
€78.77 incl. VAT €65.10 Excl. VAT
To order
To place an order, fill in the inquiry form and our sales team will contact you.
Estimated delivery 3–4 weeks
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL XTR-240P-24 is a high-performance industrial three-phase AC/DC switching power supply for DIN rail mounting from the modern XTR-240 series, designed for industrial automation, control systems, manufacturing equipment and professional 24 V DC applications. It delivers a regulated 24 V DC output, 10 A rated output current and 240 W continuous output power. Its compact 48 mm wide construction makes efficient use of space inside industrial control cabinets. The P version supports parallel operation and output current sharing, while the standard XTR-240P-24 model features screw terminals for reliable wire connections.
The XTR-240P-24 is designed for three-phase mains supplies with a 320–600 V AC input range at 47–63 Hz. It also supports a 450–800 V DC input and allows dual-phase connection under the manufacturer's specified conditions. The output voltage can be adjusted over 24–29 V DC, enabling the supply to be matched to individual application requirements. Typical 92.5% efficiency, low inrush current and natural convection cooling contribute to energy-efficient and quiet fanless operation.
A key advantage of the MEAN WELL XTR-240P-24 is its short-term peak load capability of up to 150% of rated output power, equivalent to 360 W and 15 A for up to 5 seconds. This feature supports equipment with high start-up current requirements, including industrial drives, electromagnetic actuators and electronic systems with variable loads. An integrated constant-current limiting circuit and protection against short circuit, overload, overvoltage and overtemperature contribute to reliable operation. The P version supports parallel connection of compatible power supplies with current sharing. With an appropriate system design, up to four units can be used, while the manufacturer specifies the parallel function as an optional configuration.
For integration into professional industrial systems, the XTR-240P-24 provides a DC OK relay contact for output voltage status signalling. The power supply is designed for an operating temperature range of −40 to +85°C, supporting full-load operation up to +60°C, with derating required at higher temperatures. Its conformal coating, overvoltage category III (OVC III) rating and suitability for operation at altitudes of up to 5,000 m support deployment in demanding industrial environments. Compact 48 × 125.2 × 125 mm dimensions, TS-35 DIN rail mounting and robust construction simplify installation inside professional control cabinets. The manufacturer provides a 5-year warranty.
Key features
-
Product type: industrial three-phase AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Manufacturer series: XTR-240
-
Version: P – parallel operation capability
-
Connection type: standard screw terminals
-
Mounting: TS-35/7.5 or TS-35/15 DIN rail
-
Number of outputs: 1
-
Rated output power: 240 W
-
Output voltage: 24 V DC
-
Rated output current: 10 A
-
Short-term peak output power: 360 W / 5 seconds
-
Short-term peak output current: 15 A / 5 seconds
-
Output voltage adjustment: 24–29 V DC
-
Output voltage tolerance: ±1%
-
Line regulation: ±0.5%
-
Load regulation: ±1%
-
Ripple and noise: 100 mVp-p maximum
-
Three-phase AC input voltage: 320–600 V AC
-
DC input voltage: 450–800 V DC
-
Dual-phase operation: possible under manufacturer's specified conditions
-
Input frequency: 47–63 Hz
-
Typical efficiency: 92.5%
-
No-load power consumption: approximately 2.5 W at 400 V AC
-
Typical inrush current: 10 A at 400 V AC
-
Short-term overload capability: up to 150% of rated power
-
Current limiting: integrated constant-current limiting
-
Protection functions: short circuit, overload, overvoltage, overtemperature
-
Output overvoltage protection: 30–36 V DC
-
Output status indication: DC OK relay contact
-
Parallel operation: supported on P version
-
Current sharing: integrated parallel operation function
-
Cooling method: natural convection, fanless
-
Operating temperature: −40 to +85°C, with derating above +60°C
-
Overvoltage category: OVC III
-
Maximum operating altitude: 5,000 m
-
Circuit protection: conformal coating
-
Width: 48 mm
-
Dimensions: 48 × 125.2 × 125 mm
-
Manufacturer's warranty: 5 years
Target applications
-
Industrial automation and control systems
-
Three-phase industrial electrical cabinets
-
Power supplies for PLCs, industrial modules and actuators
-
Automated production lines and machinery
-
Semiconductor manufacturing equipment
-
Industrial drives and electromechanical equipment
-
Parallel power supply systems with current sharing
-
Industrial sensors, monitoring and communication systems
-
Equipment with short-duration increased current demands
-
OEM manufacturing of industrial and electronic equipment
Parameters
Product parameters
| Description: | AC/DC DIN rail power supply with screw terminal block |
| Operating temperature: | -40~85 °C |
| Dimensions: | 48x125,2x125 mm |
| Output voltage DC: | 24 V |
| Output current: | 10 A |
| Series: | XTR |
| AC input voltage: | 320~600 V |
| DC input voltage: | 450~800 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 240 W |
| Number of outputs: | 1 |
| Isolation: | 4870 V |
| Weight: | 990 g |
| Efficiency (typ.): | 92,5 % |
| Model series: | XTR-240P |
| Approval agency: | UL, SEMI F47, DNV, CB, TUV, CCC |
| Protection: | Over Load Protection (OLP), Over Temperature Protection (OTP), Over Voltage Protection (OVP), Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 12 |
| Customs nomenclature: | 85044095 |
Files for download
| XTR-240-spec.pdf |
PDF, 954.5 kB |