MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

XDR-960-24PIGL

Stock number: C014963

Manufacturer: MEANWELL



To order

To place an order, fill in the inquiry form and our sales team will contact you.

In our warehouse 0 pcs External warehouse 0 pcs

We will confirm the exact delivery date in our offer.


Product description

The MEAN WELL XDR-960-24PIGL is a high-performance industrial AC/DC switching power supply for DIN rail mounting from the advanced XDR-960 series, designed for industrial automation, manufacturing equipment, control systems, energy infrastructure and demanding industrial installations. It delivers a regulated 24 V DC output, 40 A rated output current and 960 W output power. The PIGL version combines tool-free Push-In terminals (PI) with the GL variant, designed for applications requiring DNV marine certification. Its compact 96 mm wide enclosure makes efficient use of space in industrial control cabinets.

The XDR-960-24PIGL supports a wide 85–305 V AC input range at 47–63 Hz and can also operate from 80–431 V DC, subject to the manufacturer's derating requirements. It is suitable for standard industrial mains supplies and installations using 277 V AC. The output voltage is adjustable over 24–29 V DC, allowing the supply to be matched to the requirements of connected equipment. Integrated active power factor correction (PFC) and typical 95% efficiency contribute to energy-efficient operation and reduced thermal losses. The power supply uses natural convection cooling, enabling quiet, fanless operation.

A major advantage of the MEAN WELL XDR-960-24PIGL is its short-term peak load capability of up to 200% of rated output power, equivalent to 1,920 W and 80 A for 5 seconds. This supports equipment with high start-up current requirements, including industrial drives, electromagnetic actuators and larger automation assemblies. An integrated ORing MOSFET supports safe parallel operation and redundant power configurations. The power supply allows parallel connection of up to four units in a 3+1 configuration, with a combined available capacity of up to 3,840 W, depending on the configuration and the manufacturer's operating conditions. A Modbus RTU interface via RS-485 enables remote monitoring and control of the power system.

The XDR-960-24PIGL features a DC OK relay contact for output voltage status signalling and a Remote ON/OFF function for remote control. Integrated protection against short circuit, overload, overvoltage and overtemperature contributes to reliable operation. The power supply supports an operating temperature range of −40 to +85°C, subject to the manufacturer's derating curve. Its 4,000 V AC input-to-output withstand voltage, electromagnetic interference resistance and conformal coating on the electronics support operation in demanding industrial environments. The GL version also extends its suitability to marine and offshore industrial systems. Its 96 × 125.2 × 132 mm dimensions, TS-35 DIN rail mounting and tool-free Push-In terminals simplify integration into professional electrical control cabinets. The manufacturer provides a 5-year warranty.

Key features

  • Product type: industrial AC/DC switching power supply

  • Manufacturer series: XDR-960

  • Version: PIGL – Push-In terminals and DNV marine certification

  • Mounting: TS-35 DIN rail

  • Number of outputs: 1

  • Rated output power: 960 W

  • Output voltage: 24 V DC

  • Rated output current: 40 A

  • Short-term peak output power: 1,920 W / 5 seconds

  • Short-term peak output current: 80 A / 5 seconds

  • Output voltage adjustment: 24–29 V DC

  • Output voltage tolerance: ±1%

  • Line regulation: ±0.5%

  • Load regulation: ±1%

  • Ripple and noise: 100 mVp-p maximum

  • AC input voltage: 85–305 V AC

  • DC input voltage: 80–431 V DC, subject to derating

  • Input frequency: 47–63 Hz

  • Typical efficiency: 95%

  • Power factor correction: active PFC

  • Typical power factor: greater than 0.98 at 115 V AC / greater than 0.95 at 230 V AC

  • Typical input current: 10 A at 115 V AC / 5 A at 230 V AC / 4.2 A at 277 V AC

  • Typical inrush current: 23 A at 115 V AC / 10 A at 230 V AC / 15 A at 277 V AC

  • Remote OFF power consumption: approximately 1.5 W

  • Short-term overload capability: up to 200% of rated power

  • Protection functions: short circuit, overload, overvoltage, overtemperature

  • Overload protection: current limiting, hiccup mode at low output voltage

  • Overvoltage protection: 30–34 V DC

  • Output status indication: DC OK relay contact

  • Remote control: Remote ON/OFF

  • Communication interface: RS-485

  • Communication protocol: Modbus RTU

  • Parallel operation: supported

  • Maximum parallel system capacity: up to 3,840 W

  • Redundant operation: supported, integrated ORing MOSFET

  • Input-to-output withstand voltage: 4,000 V AC

  • Cooling method: natural convection, fanless

  • Operating temperature: −40 to +85°C, subject to derating

  • Maximum operating altitude: 5,000 m, depending on applicable standards

  • Circuit protection: conformal coating

  • Construction: compact industrial design

  • Width: 96 mm

  • Dimensions: 96 × 125.2 × 132 mm

  • Approximate weight: 2.06 kg

  • Connections: tool-free Push-In terminals

  • Safety standards: IEC/EN 62368-1, IEC/EN 61558-1/-2-16, IEC/EN 61010-1/-2-201

  • Marine certification: DNV, GL version

  • EMC emissions: EN 55032 Class B

  • Manufacturer's warranty: 5 years

Target applications

  • Industrial automation and manufacturing equipment

  • Power supplies for industrial control systems and PLCs

  • High-power 24 V DC distributed power systems

  • Industrial drives, electromagnetic actuators and motor systems

  • Redundant power systems and parallel power supply configurations

  • Marine and offshore industrial installations

  • Energy systems and industrial infrastructure

  • Automated production lines and machinery

  • Remote power monitoring and control systems

  • OEM manufacturing of professional industrial equipment


Parameters

Product parameters

Description: AC/DC DIN rail power supply with push-in terminal block and installation bracket
Operating temperature: -40~85 °C
Dimensions: 96x125,2x132 mm
Output voltage DC: 24 V
Output current: 40 A
Series: XDR
AC input voltage: 85~305 V
DC input voltage: 80~431 V
Input frequency: 47~63 Hz
Power of convertor: 960 W
Number of outputs: 1
Isolation: 4000 V
Weight: 2060 g
Efficiency (typ.): 95 %
Model series: XDR-960
Approval agency: UL, CB, TUV, BSMI, EAC, CCC
Protection: Over Load Protection (OLP), Over Temperature Protection (OTP), Over Voltage Protection (OVP), Short Circuit Protection (SCP)

Packaging and legislation

Typ balení: Box
Původ: CN
Small packing quantity: 6
Customs nomenclature: 85044095

Files for download

PDF,
1.27 MB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.