- Doprava zdarma
XDR-480-24
Stock number: C014945
Manufacturer: MEANWELL
€151.10 incl. VAT €124.87 Excl. VAT
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL XDR-480-24 is a high-performance industrial AC/DC switching power supply for DIN rail mounting from the advanced XDR-480 series, designed for industrial automation, control systems, manufacturing equipment and high-power 24 V DC applications. It delivers a regulated 24 V DC output, 20 A rated output current and 480 W output power. Its compact 48 mm wide design makes efficient use of space in industrial control cabinets. The standard version features screw terminals for reliable wire connections.
The XDR-480-24 supports a wide 85–305 V AC input range at 47–63 Hz and can also operate from 80–431 V DC, subject to the manufacturer's operating conditions. It is suitable for standard industrial mains supplies and installations using 277 V AC. The output voltage is adjustable over 24–29 V DC, allowing the supply to be matched to the requirements of connected equipment. Integrated active power factor correction (PFC) and typical efficiency of approximately 95% contribute to energy-efficient operation and reduced thermal losses. The power supply uses natural convection cooling, enabling quiet, fanless operation.
A major advantage of the MEAN WELL XDR-480-24 is its short-term peak load capability of up to 200% of rated output power, equivalent to 960 W and 40 A for up to 5 seconds. This supports equipment with high start-up current requirements, including industrial drives, electromagnetic actuators and other electronic devices with dynamic loads. The power supply also supports short-duration current transients, subject to the manufacturer's specified conditions. Integrated active current sharing and an ORing FET enable parallel and redundant power configurations. Up to four units can be connected, including a 3+1 redundant arrangement, provided the manufacturer's installation requirements are followed.
For integration into modern industrial systems, the XDR-480-24 provides an RS-485 interface with Modbus RTU communication, enabling monitoring and control of selected operating functions. A DC OK relay contact provides output voltage status signalling, while the Remote ON/OFF function enables remote power control. Integrated protection against short circuit, overload, overvoltage and overtemperature contributes to reliable operation. The power supply is designed for an operating temperature range of −40 to +85°C, subject to the manufacturer's derating curve. Its 4,000 V AC input-to-output withstand voltage and conformal coating on the electronics support operation in demanding industrial environments. Compact 48 × 125.2 × 125 mm dimensions, TS-35 DIN rail mounting and robust construction simplify installation in professional control cabinets. The manufacturer provides a 5-year warranty.
Key features
-
Product type: industrial AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Manufacturer series: XDR-480
-
Version: standard, screw terminals
-
Mounting: TS-35 DIN rail
-
Number of outputs: 1
-
Rated output power: 480 W
-
Output voltage: 24 V DC
-
Rated output current: 20 A
-
Short-term peak output power: 960 W / 5 seconds
-
Short-term peak output current: 40 A / 5 seconds
-
Output voltage adjustment: 24–29 V DC
-
AC input voltage: 85–305 V AC
-
DC input voltage: 80–431 V DC, subject to derating
-
Input frequency: 47–63 Hz
-
Typical efficiency: approximately 95%
-
Power factor correction: active PFC
-
Short-term overload capability: up to 200% of rated power
-
Protection functions: short circuit, overload, overvoltage, overtemperature
-
Current limiting: integrated
-
Output status indication: DC OK relay contact
-
Remote control: Remote ON/OFF
-
Communication interface: RS-485
-
Communication protocol: Modbus RTU
-
Parallel operation: up to 4 units
-
Current sharing: active
-
Redundant operation: supported, integrated ORing FET
-
Input-to-output withstand voltage: 4,000 V AC
-
Cooling method: natural convection, fanless
-
Operating temperature: −40 to +85°C, subject to derating
-
Maximum operating altitude: 5,000 m
-
Circuit protection: conformal coating
-
Width: 48 mm
-
Dimensions: 48 × 125.2 × 125 mm
-
Connections: screw terminals
-
Manufacturer's warranty: 5 years
Target applications
-
Industrial automation and control systems
-
High-power supplies for PLCs, industrial modules and actuators
-
Industrial control cabinets and 24 V DC distribution systems
-
Automated production lines and machinery
-
Industrial drives and equipment with high start-up currents
-
Parallel and redundant power systems
-
Energy infrastructure and industrial facilities
-
Industrial communication and monitoring systems
-
Equipment with high short-duration current demands
-
OEM manufacturing of professional industrial equipment
Parameters
Product parameters
| Description: | AC/DC DIN rail power supply with screw terminal block |
| Operating temperature: | -40~85 °C |
| Dimensions: | 48x125,2x125 mm |
| Output voltage DC: | 24 V |
| Output current: | 20 A |
| Series: | XDR |
| AC input voltage: | 85~305 V |
| DC input voltage: | 80~431 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 480 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 1100 g |
| Efficiency (typ.): | 95,5 % |
| Model series: | XDR-480 |
| Approval agency: | UL, CE, CB, TUV |
| Protection: | Over Load Protection (OLP), Over Temperature Protection (OTP), Over Voltage Protection (OVP), Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 12 |
| Customs nomenclature: | 85044095 |
Files for download
| XDR-480-spec.pdf |
PDF, 1.09 MB |