SCWN06A-15
Stock number: C003203
Manufacturer: MEANWELL
€10.90 incl. VAT €9.01 Excl. VAT
Product description
The MEAN WELL SCWN06A-15 is a compact isolated switching DC/DC converter with a single regulated output, designed for industrial electronics, measuring instruments, communication modules and embedded systems. It converts DC voltage from a nominal 12 V power bus to a regulated 15 V DC output. The converter delivers a rated output current of 400 mA and 6 W output power.
The converter supports a wide input voltage range of 9–18 V DC, corresponding to a 2:1 input ratio. This makes it suitable for electronic systems powered from 12 V distribution networks where the input voltage may vary. Typical efficiency of 84% helps reduce power losses and supports efficient operation.
A key feature is galvanic isolation between input and output, rated at 3 kV DC. This isolation allows a separate power domain with its own reference potential, which is particularly useful in measurement, control and communication equipment. The regulated output provides ±1.5% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.
The converter incorporates a Pi-type input filter, helping to reduce interference on the supply lines. Maximum output ripple and noise is 50 mVp-p. Built-in short-circuit and overload protection supports reliable operation and provides automatic recovery once a fault has been removed. The module also features input undervoltage lockout (UVLO).
The electronics are housed in a compact DIP24 package measuring 31.8 × 20.3 × 10.2 mm. The module is designed for through-hole mounting directly onto a PCB and uses fanless natural convection cooling. Its wide operating temperature range of −40 °C to +90 °C allows use in demanding industrial environments, subject to the specified load derating requirements.
The regulated output and no minimum load requirement make the converter suitable for electronic circuits with varying power consumption. Its compact dimensions and standardised pin arrangement simplify integration into both new and existing electronic designs.
The MEAN WELL SCWN06A-15 provides a practical solution for isolated 12 V DC to 15 V DC conversion in applications requiring high isolation voltage, regulated output, compact construction and a wide operating temperature range.
Key features
-
Product type: isolated switching DC/DC converter
-
Manufacturer series: SCWN06
-
Nominal input voltage: 12 V DC
-
Input voltage range: 9–18 V DC
-
Input voltage ratio: 2:1
-
Output voltage: 15 V DC
-
Rated output current: 400 mA
-
Rated output power: 6 W
-
Number of outputs: 1
-
Typical efficiency: 84%
-
Output voltage accuracy: ±1.5%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Maximum output ripple and noise: 50 mVp-p
-
Switching frequency: 100 kHz minimum
-
Galvanic isolation: yes
-
Input-to-output isolation voltage: 3 kV DC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Typical isolation capacitance: 250 pF
-
Input filter: Pi filter
-
Typical full-load input current: 600 mA
-
Typical no-load input current: 10 mA
-
Protection: short circuit, overload and input undervoltage
-
Overload protection threshold: 120–250% of rated output power
-
Short-circuit protection: continuous, with automatic recovery
-
UVLO thresholds: shutdown at 8 V DC, restart at 8.8 V DC
-
Maximum capacitive load: 4,700 µF
-
Minimum load: not required
-
Construction: DIP24 module
-
Mounting: through-hole PCB mounting
-
Number of physical pins: 8
-
Cooling: fanless natural convection
-
Operating temperature: −40 °C to +90 °C, with load derating
-
Dimensions: 31.8 × 20.3 × 10.2 mm
-
Weight: approximately 12.4 g
-
Case material: non-conductive plastic, UL 94V-0
-
Electromagnetic compatibility: BS EN/EN 55032 Class A
-
3-year manufacturer's warranty
Target applications
-
Isolated 12 V DC to 15 V DC voltage conversion
-
Industrial automation and control systems
-
Galvanically isolated electronic circuits
-
Industrial measurement and monitoring systems
-
Sensor and detection modules
-
Communication and data equipment
-
Embedded electronic systems
-
OEM industrial electronics
-
Equipment with separate power domains
-
Electronics development and testing systems
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Operating temperature: | -40~90 °C |
| Dimensions: | 31,8x20,3x10,2 mm |
| Output voltage DC: | -15 V |
| Output current: | 400 mA |
| Series: | SCWN |
| DC input voltage: | 9~18 V |
| Power of convertor: | 6 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 12,4 g |
| Efficiency (typ.): | 84 % |
| Model series: | SCWN-06 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | CN |
| Small packing quantity: | 10 |
| Customs nomenclature: | 85044095 |
Files for download
| SCWN06,DCWN06-spec.pdf |
PDF, 118.15 kB |