MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

SCW20C-12

Stock number: C003247

Manufacturer: MEANWELL


€25.27 incl. VAT €20.88 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


SCW20A_OK.jpg

€25.27 incl. VAT

Product description

The MEAN WELL SCW20C-12 is a compact isolated switching DC/DC converter with a single regulated output, designed for industrial electronics, automation, measuring instruments and communication systems. It converts voltage from a nominal 48 V DC power bus to a regulated 12 V DC output, delivering a rated output current of 1.666 A and 20 W output power.

The converter supports a wide input voltage range of 36–75 V DC, corresponding to a 2:1 input ratio, making it suitable for equipment powered from industrial and telecommunications 48 V DC distribution systems. Typical efficiency of 87% helps minimise power losses and heat generation.

A key feature is galvanic isolation between input and output, rated at 1.5 kV DC. This enables a separate 12 V power domain with its own electrical reference, particularly useful for measurement, control and communication electronics. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.

The integrated Pi-type input filter helps reduce interference on the supply lines. Maximum output ripple and noise is 80 mVp-p. Built-in protection includes continuous short-circuit protection with automatic recovery and overload protection.

For straightforward integration into electronic equipment, the converter features remote ON/OFF control. A dedicated control input allows individual sections of a system to be powered according to their operating requirements, for example via a microprocessor or supervisory controller.

The electronics are housed in a compact five-sided shielded metal DIP24 enclosure measuring 31.8 × 20.3 × 12.2 mm. The module has nine physical leads and is designed for through-hole mounting directly onto a PCB. Cooling is provided by natural convection.

With an operating temperature range of −40 °C to +80 °C, subject to load derating at higher temperatures, the MEAN WELL SCW20C-12 provides a practical solution for isolated 48 V DC to 12 V DC conversion in industrial, communication and embedded electronic applications.

Key features

  • Product type: isolated switching DC/DC converter

  • Manufacturer series: SCW20

  • Nominal input voltage: 48 V DC

  • Input voltage range: 36–75 V DC

  • Input voltage ratio: 2:1

  • Output voltage: 12 V DC

  • Rated output current: 1.666 A

  • Rated output power: 20 W

  • Number of outputs: 1

  • Typical efficiency: 87%

  • Output voltage accuracy: ±2%

  • Line regulation: ±0.5%

  • Load regulation: ±0.5%

  • Maximum output ripple and noise: 80 mVp-p

  • Minimum switching frequency: 400 kHz

  • Galvanic isolation: yes

  • Input-to-output isolation voltage: 1.5 kV DC

  • Isolation resistance: 100 MΩ at 500 V DC

  • Typical isolation capacitance: 1,200 pF

  • Input filter: Pi filter

  • Typical full-load input current: 479 mA

  • Typical no-load input current: 15 mA

  • Protection: short circuit and overload

  • Overload protection threshold: 120–190% of rated output power

  • Short-circuit protection: continuous, with automatic recovery

  • Remote control: Remote ON/OFF

  • Power ON: control input open or above 2.5 V relative to −Vin

  • Power OFF: control input connected to −Vin or below 0.8 V

  • Maximum external capacitive load: 220 µF

  • Construction: five-sided shielded metal DIP24 module

  • Mounting: through-hole PCB mounting

  • Number of physical leads: 9

  • Cooling: fanless natural convection

  • Operating temperature: −40 °C to +80 °C, with load derating

  • Maximum case temperature: +110 °C

  • Dimensions: 31.8 × 20.3 × 12.2 mm

  • Weight: approximately 18.5 g

  • Recommended input fuse: 1 A slow-blow

  • EMC: EN 55032 Class A radiated emissions, under the conditions specified in the datasheet

  • 3-year manufacturer's warranty

Target applications

  • Isolated 48 V DC to 12 V DC voltage conversion

  • Industrial automation and control systems

  • Galvanically isolated electronic circuits

  • Telecommunications and data equipment

  • Industrial measurement and monitoring instruments

  • Sensor and detection systems

  • Embedded electronics and OEM equipment

  • Microprocessor and digital electronic systems

  • Equipment powered from 48 V DC distribution systems

  • Electronic systems with remotely controlled power


Parameters

Product parameters

Description: DC/DC converter regulated
Operating temperature: -40~80 °C
Dimensions: 31,8x20,3x12,2 mm
Output voltage DC: -12 V
Output current: 1,666 A
Series: SCW
DC input voltage: 36~75 V
Power of convertor: 20 W
Number of outputs: 1
Isolation: 1500 V
Weight: 18,5 g
Efficiency (typ.): 87 %
Model series: SCW-20

Packaging and legislation

Typ balení: Tube
Původ: CN
Small packing quantity: 15
Customs nomenclature: 85044095

Files for download

PDF,
115.43 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.