SCW12C-15
Stock number: C003241
Manufacturer: MEANWELL
€20.31 incl. VAT €16.79 Excl. VAT
Product description
The MEAN WELL SCW12C-15 is a compact isolated DC/DC converter with a single regulated output, designed for industrial electronics, measurement equipment, communication devices and embedded systems. It converts voltage from a nominal 48 V DC power bus to a regulated 15 V DC output, delivering a rated output current of 800 mA and 12 W output power.
The converter supports an input voltage range of 36–72 V DC, corresponding to a 2:1 input ratio. This makes it suitable for electronic equipment powered from industrial and communication 48 V DC distribution systems. Typical efficiency of 83% helps minimise power losses and heat generation.
A key feature is galvanic isolation between input and output, rated at 1.5 kV DC. This enables a separate 15 V power domain with its own electrical reference, particularly useful for analogue, measurement and control circuits. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.
The integrated Pi-type input filter helps reduce interference on the supply lines. Maximum output ripple and noise is 60 mVp-p. Built-in short-circuit and overload protection operates in hiccup mode with automatic recovery once the fault condition has been removed.
For straightforward integration into electronic systems, the converter features remote ON/OFF control. A dedicated control input allows individual sections of equipment to be powered according to their operating requirements.
The electronics are housed in a compact shielded metal DIP24 enclosure measuring 31.8 × 20.3 × 12.2 mm. The module is designed for through-hole mounting directly onto a PCB. Fanless natural convection cooling makes it suitable for space-constrained equipment.
With an operating temperature range of −40 °C to +71 °C, subject to load derating at higher temperatures, the MEAN WELL SCW12C-15 provides a practical solution for isolated 48 V DC to 15 V DC conversion in industrial, communication and embedded electronic applications.
Key features
-
Product type: isolated switching DC/DC converter
-
Manufacturer series: SCW12
-
Nominal input voltage: 48 V DC
-
Input voltage range: 36–72 V DC
-
Input voltage ratio: 2:1
-
Output voltage: 15 V DC
-
Rated output current: 800 mA
-
Output current range: 160–800 mA
-
Rated output power: 12 W
-
Number of outputs: 1
-
Typical efficiency: 83%
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Maximum output ripple and noise: 60 mVp-p
-
Switching frequency: 400 kHz minimum
-
Galvanic isolation: yes
-
Input-to-output isolation voltage: 1.5 kV DC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Maximum isolation capacitance: 2,200 pF
-
Input filter: Pi filter
-
Typical full-load input current: 320 mA
-
Typical no-load input current: 25 mA
-
Protection: short circuit and overload
-
Overload protection threshold: 110–180% of rated output power
-
Protection mode: hiccup mode with automatic recovery
-
Remote control: Remote ON/OFF
-
Power ON: control input open or above 4 V relative to −Vin
-
Power OFF: control input connected to −Vin or below 1 V
-
Maximum external capacitive load: 220 µF
-
Construction: shielded metal DIP24 module
-
Mounting: through-hole PCB mounting
-
Cooling: fanless natural convection
-
Operating temperature: −40 °C to +71 °C, with load derating
-
Dimensions: 31.8 × 20.3 × 12.2 mm
-
Weight: approximately 17.5 g
-
EMC emissions: BS EN/EN 55032 Class A, FCC Part 15 Class A
-
2-year manufacturer's warranty
Target applications
-
Isolated 48 V DC to 15 V DC voltage conversion
-
Industrial automation and control systems
-
Galvanically isolated electronic circuits
-
Industrial measurement and monitoring instruments
-
Communication and telecommunications equipment
-
Analogue and signal-processing electronic circuits
-
Sensor and detection systems
-
Embedded electronics and OEM equipment
-
Equipment powered from 48 V DC distribution systems
-
Electronics development and testing assemblies
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Operating temperature: | -25~71 °C |
| Dimensions: | 31,8x20,3x12,2 mm |
| Output voltage DC: | -15 V |
| Output current: | 800 mA |
| Series: | SCW |
| DC input voltage: | 36~72 V |
| Power of convertor: | 12 W |
| Number of outputs: | 1 |
| Isolation: | 1500 V |
| Weight: | 17,5 g |
| Efficiency (typ.): | 83 % |
| Model series: | SCW-12 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | CN |
| Small packing quantity: | 15 |
| Customs nomenclature: | 85044095 |
Files for download
| SCW12-SPEC.pdf |
PDF, 78.38 kB |