SCW12B-12
Stock number: C003237
Manufacturer: MEANWELL
€20.31 incl. VAT €16.79 Excl. VAT
Product description
The MEAN WELL SCW12B-12 is a compact isolated switching DC/DC converter with a single regulated output, designed for industrial electronics, measuring instruments, communication modules and embedded systems. It converts voltage from a nominal 24 V DC power bus to a regulated 12 V DC output, delivering a rated output current of 1 A and 12 W output power.
The converter supports a wide input voltage range of 18–36 V DC, corresponding to a 2:1 input ratio. This makes it suitable for electronic equipment powered from industrial 24 V distribution networks where the supply voltage may vary. Typical efficiency of 83% helps minimise power losses and supports efficient operation.
A key feature is galvanic isolation between input and output, rated at 1.5 kV DC. This enables a separate 12 V power domain with its own electrical reference, particularly useful in measurement, control and communication electronics. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.
The integrated Pi-type input filter helps reduce electromagnetic interference on the supply lines. Maximum output ripple and noise is 60 mVp-p. Built-in short-circuit and overload protection operates in hiccup mode with automatic recovery once the fault condition has been removed.
A practical feature is remote ON/OFF control via a dedicated control input. This allows individual electronic circuits to be powered according to the operating mode of the equipment, making the converter suitable for automated systems, control units and embedded applications.
The electronics are housed in a compact shielded metal DIP24 enclosure measuring 31.8 × 20.3 × 12.2 mm. The module is designed for through-hole mounting directly onto a PCB and uses fanless natural convection cooling. The operating temperature range is −40 °C to +71 °C, subject to load derating at higher temperatures.
Combining a regulated 12 V output, galvanic isolation, remote control and compact construction, the MEAN WELL SCW12B-12 provides a practical solution for isolated 24 V DC to 12 V DC conversion in industrial, communication and embedded electronic equipment.
Key features
-
Product type: isolated switching DC/DC converter
-
Manufacturer series: SCW12
-
Nominal input voltage: 24 V DC
-
Input voltage range: 18–36 V DC
-
Input voltage ratio: 2:1
-
Output voltage: 12 V DC
-
Rated output current: 1 A
-
Rated output power: 12 W
-
Number of outputs: 1
-
Typical efficiency: 83%
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Maximum output ripple and noise: 60 mVp-p
-
Switching frequency: 400 kHz minimum
-
Galvanic isolation: yes
-
Input-to-output isolation voltage: 1.5 kV DC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Maximum isolation capacitance: 2,200 pF
-
Input filter: Pi filter
-
Typical full-load input current: 625 mA
-
Typical no-load input current: 35 mA
-
Protection: short circuit and overload
-
Overload protection threshold: 110–180% of rated output power
-
Protection mode: hiccup mode with automatic recovery
-
Remote control: Remote ON/OFF
-
Power ON: control input open or above 4 V relative to −Vin
-
Power OFF: control input connected to −Vin or below 1 V
-
Maximum external capacitive load: 220 µF
-
Construction: shielded metal DIP24 module
-
Mounting: through-hole PCB mounting
-
Cooling: fanless natural convection
-
Operating temperature: −40 °C to +71 °C, with load derating
-
Dimensions: 31.8 × 20.3 × 12.2 mm
-
Weight: approximately 18.5 g
-
EMC emissions: BS EN/EN 55032 Class A, FCC Part 15 Class A
-
2-year manufacturer's warranty
Target applications
-
Isolated 24 V DC to 12 V DC voltage conversion
-
Industrial automation and control systems
-
Galvanically isolated electronic circuits
-
Industrial measurement and monitoring instruments
-
Communication and data modules
-
Sensor and detection systems
-
Embedded electronics and OEM equipment
-
Electronic systems with remotely controlled power
-
Equipment with separate power domains
-
Electronics development and testing assemblies
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Operating temperature: | -25~71 °C |
| Dimensions: | 31,8x20,3x12,2 mm |
| Output voltage DC: | -12 V |
| Output current: | 1 A |
| Series: | SCW |
| DC input voltage: | 18~36 V |
| Power of convertor: | 12 W |
| Number of outputs: | 1 |
| Isolation: | 1500 V |
| Weight: | 17,5 g |
| Efficiency (typ.): | 83 % |
| Model series: | SCW-12 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | CN |
| Small packing quantity: | 15 |
| Customs nomenclature: | 85044095 |
Files for download
| SCW12-SPEC.pdf |
PDF, 78.38 kB |