MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

SCW12B-05

Stock number: C003234

Manufacturer: MEANWELL


€20.31 incl. VAT €16.79 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


SCW12A_OK.jpg

€20.31 incl. VAT

Product description

The MEAN WELL SCW12B-05 is a compact isolated DC/DC converter with a single regulated output, designed for industrial electronics, measuring instruments, communication modules and embedded equipment. It converts voltage from a nominal 24 V DC power bus to a regulated 5 V DC output, delivering a rated output current of 2.4 A and 12 W output power.

The converter supports an input voltage range of 18–36 V DC, corresponding to a 2:1 input ratio. This makes it suitable for electronic systems powered from industrial 24 V distribution networks where the supply voltage may vary. Typical efficiency of 83% helps reduce power losses and heat generation.

A key feature is galvanic isolation between input and output, rated at 1.5 kV DC. This enables a separate 5 V power domain with its own electrical reference, particularly useful in measurement, control and communication equipment. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.

The integrated Pi-type input filter helps reduce electromagnetic interference on the supply lines. Maximum output ripple and noise is 50 mVp-p. Built-in short-circuit and overload protection operates in hiccup mode with automatic recovery once the fault condition has been removed.

A practical feature is remote ON/OFF control via a dedicated control input. This allows individual sections of equipment to be powered according to the operating mode of a controller or embedded system.

The electronics are housed in a compact shielded metal DIP24 enclosure measuring 31.8 × 20.3 × 12.2 mm. The module has nine physical leads and is designed for through-hole mounting directly onto a PCB. Fanless natural convection cooling enables quiet operation.

With an operating temperature range of −40 °C to +71 °C, subject to load derating, and integrated protection functions, the MEAN WELL SCW12B-05 provides a practical solution for isolated 24 V DC to 5 V DC conversion in industrial and embedded electronic applications.

Key features

  • Product type: isolated switching DC/DC converter

  • Manufacturer series: SCW12

  • Nominal input voltage: 24 V DC

  • Input voltage range: 18–36 V DC

  • Input voltage ratio: 2:1

  • Output voltage: 5 V DC

  • Rated output current: 2.4 A

  • Output current range: 480–2,400 mA

  • Rated output power: 12 W

  • Number of outputs: 1

  • Typical efficiency: 83%

  • Output voltage accuracy: ±2%

  • Line regulation: ±0.5%

  • Load regulation: ±0.5%

  • Maximum output ripple and noise: 50 mVp-p

  • Switching frequency: 400 kHz minimum

  • Galvanic isolation: yes

  • Input-to-output isolation voltage: 1.5 kV DC

  • Isolation resistance: 100 MΩ at 500 V DC

  • Maximum isolation capacitance: 2,200 pF

  • Input filter: Pi filter

  • Typical full-load input current: 625 mA

  • Typical no-load input current: 35 mA

  • Protection: short circuit and overload

  • Overload protection threshold: 110–180% of rated output power

  • Protection mode: hiccup mode with automatic recovery

  • Remote control: Remote ON/OFF

  • Power ON: control input open or above 4 V relative to −Vin

  • Power OFF: control input connected to −Vin or below 1 V

  • Maximum external capacitive load: 1,000 µF

  • Construction: shielded metal DIP24 module

  • Mounting: through-hole PCB mounting

  • Number of physical leads: 9

  • Cooling: fanless natural convection

  • Operating temperature: −40 °C to +71 °C, with load derating

  • Dimensions: 31.8 × 20.3 × 12.2 mm

  • Weight: approximately 17.5 g

  • EMC emissions: BS EN/EN 55032 Class A, FCC Part 15 Class A

Target applications

  • Isolated 24 V DC to 5 V DC voltage conversion

  • Industrial automation and control systems

  • Galvanically isolated electronic circuits

  • Microprocessor and digital electronic systems

  • Industrial measurement and monitoring instruments

  • Communication and data modules

  • Sensor and detection systems

  • Embedded electronics and OEM equipment

  • Electronic systems with remotely controlled power

  • Electronics development and testing assemblies


Parameters

Product parameters

Description: DC/DC converter regulated
Operating temperature: -25~71 °C
Dimensions: 31,8x20,3x12,2 mm
Output voltage DC: -5 V
Output current: 2,4 A
Series: SCW
DC input voltage: 18~36 V
Power of convertor: 12 W
Number of outputs: 1
Isolation: 1500 V
Weight: 17,5 g
Efficiency (typ.): 83 %
Model series: SCW-12

Packaging and legislation

Typ balení: Tube
Původ: CN
Small packing quantity: 15
Customs nomenclature: 85044095

Files for download

PDF,
78.38 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.