MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

SCW12A-05

Stock number: C003233

Manufacturer: MEANWELL


€20.31 incl. VAT €16.79 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


SCW12A_OK.jpg

€20.31 incl. VAT

Product description

The MEAN WELL SCW12A-05 is a compact isolated switching DC/DC converter with a single regulated output, designed for industrial electronics, measuring instruments, communication modules and embedded equipment. It converts voltage from a nominal 12 V DC power bus to a regulated 5 V DC output, delivering a rated output current of 2.4 A and 12 W output power.

The converter supports a wide input voltage range of 9–18 V DC, corresponding to a 2:1 input ratio. This allows reliable operation where the supply voltage may vary. Typical efficiency of 82% helps reduce power losses and heat generation.

A key feature is galvanic isolation between input and output, rated at 1.5 kV DC. This enables a separate 5 V power domain with its own electrical reference, particularly useful in measurement, communication and control electronics. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.

The integrated Pi-type input filter helps reduce interference on the supply lines. Maximum output ripple and noise is 50 mVp-p. Built-in short-circuit and overload protection operates in hiccup mode with automatic recovery once the fault condition has been removed.

A practical feature is remote ON/OFF control via a dedicated control input. This allows selected electronic circuits to be powered according to the operating state of the equipment, making the converter particularly useful in automated and embedded systems.

The electronics are housed in a compact five-sided shielded metal enclosure measuring 31.8 × 20.3 × 12.2 mm. The DIP24 module is designed for through-hole mounting directly onto a PCB and uses fanless natural convection cooling.

The converter is designed for operating temperatures from −40 °C to +71 °C, subject to load derating at higher temperatures. The MEAN WELL SCW12A-05 therefore provides a practical solution for isolated 12 V DC to 5 V DC conversion in applications requiring a regulated output, compact dimensions and remote power control.

Key features

  • Product type: isolated switching DC/DC converter

  • Manufacturer series: SCW12

  • Nominal input voltage: 12 V DC

  • Input voltage range: 9–18 V DC

  • Input voltage ratio: 2:1

  • Output voltage: 5 V DC

  • Rated output current: 2.4 A

  • Output current range: 480–2,400 mA

  • Rated output power: 12 W

  • Number of outputs: 1

  • Typical efficiency: 82%

  • Output voltage accuracy: ±2%

  • Line regulation: ±0.5%

  • Load regulation: ±0.5%

  • Maximum output ripple and noise: 50 mVp-p

  • Switching frequency: 400 kHz minimum

  • Galvanic isolation: yes

  • Input-to-output isolation voltage: 1.5 kV DC

  • Isolation resistance: 100 MΩ at 500 V DC

  • Maximum isolation capacitance: 2,200 pF

  • Input filter: Pi filter

  • Typical full-load input current: 1,245 mA

  • Typical no-load input current: 70 mA

  • Protection: short circuit and overload

  • Overload protection threshold: 110–180% of rated output power

  • Protection mode: hiccup mode with automatic recovery

  • Remote control: Remote ON/OFF

  • Power ON: control input open or above 4 V relative to −Vin

  • Power OFF: control input shorted to −Vin or below 1 V

  • Maximum external capacitive load: 1,000 µF

  • Construction: five-sided shielded metal DIP24 module

  • Mounting: through-hole PCB mounting

  • Number of physical leads: 9

  • Cooling: fanless natural convection

  • Operating temperature: −40 °C to +71 °C, with load derating

  • Dimensions: 31.8 × 20.3 × 12.2 mm

  • Weight: approximately 17.5 g

  • EMC emissions: BS EN/EN 55032 Class A, FCC Part 15 Class A

  • 2-year manufacturer's warranty

Target applications

  • Isolated 12 V DC to 5 V DC voltage conversion

  • Industrial automation and control systems

  • Galvanically isolated electronic circuits

  • Microprocessor and digital electronic systems

  • Industrial measurement and monitoring instruments

  • Communication and data modules

  • Sensor and detection systems

  • Embedded electronics and OEM equipment

  • Electronic systems with remotely controlled power

  • Electronics development and testing assemblies


Parameters

Product parameters

Description: DC/DC converter regulated
Operating temperature: -25~71 °C
Dimensions: 31,8x20,3x12,2 mm
Output voltage DC: -5 V
Output current: 2,4 A
Series: SCW
DC input voltage: 9~18 V
Power of convertor: 12 W
Number of outputs: 1
Isolation: 1500 V
Weight: 17,5 g
Efficiency (typ.): 82 %
Model series: SCW-12

Packaging and legislation

Typ balení: Tube
Původ: CN
Small packing quantity: 15
Customs nomenclature: 85044095

Files for download

PDF,
78.38 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.