SCW08A-05
Stock number: C003225
Manufacturer: MEANWELL
€16.40 incl. VAT €13.55 Excl. VAT
Product description
The MEAN WELL SCW08A-05 is a compact isolated switching DC/DC converter with a single regulated output, designed for industrial electronics, measuring instruments, communication modules and embedded equipment. It converts voltage from a nominal 12 V DC power bus to a regulated 5 V DC output, delivering a rated output current of 1.6 A and 8 W output power.
The converter supports an input voltage range of 9–18 V DC, corresponding to a 2:1 input ratio. This makes it suitable for electronic systems powered from 12 V distribution networks where the input voltage may vary. Typical efficiency of 75% supports reliable voltage conversion in a compact PCB-mounted module.
A key feature is galvanic isolation between input and output, rated at 1.5 kV DC according to the manufacturer's current datasheet. This isolation enables a separate 5 V power domain with its own electrical reference, which is particularly useful in measurement, communication and control circuits. The regulated output provides ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation.
The integrated Pi-type input filter helps reduce electromagnetic interference on the supply lines. Maximum output ripple and noise is 50 mVp-p. Built-in short-circuit and overload protection operates in hiccup mode with automatic recovery once the fault condition has been removed.
The electronics are housed in a five-sided shielded metal enclosure measuring 31.8 × 20.3 × 12.2 mm. The DIP24 module with eight physical leads is designed for through-hole mounting directly onto a PCB. Fanless natural convection cooling enables quiet operation.
The converter is designed for operating temperatures from −40 °C to +71 °C, subject to load derating at higher temperatures. Combining a regulated 5 V output, galvanic isolation, compact construction and built-in protection, the MEAN WELL SCW08A-05 provides a practical solution for isolated electronic circuits powered from 12 V DC systems.
Key features
-
Product type: isolated switching DC/DC converter
-
Manufacturer series: SCW08
-
Nominal input voltage: 12 V DC
-
Input voltage range: 9–18 V DC
-
Input voltage ratio: 2:1
-
Output voltage: 5 V DC
-
Rated output current: 1.6 A
-
Output current range: 320–1,600 mA
-
Rated output power: 8 W
-
Number of outputs: 1
-
Typical efficiency: 75%
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Maximum output ripple and noise: 50 mVp-p
-
Switching frequency: 50 kHz minimum
-
Galvanic isolation: yes
-
Input-to-output isolation voltage: 1.5 kV DC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Maximum isolation capacitance: 250 pF
-
Input filter: Pi filter
-
Typical full-load input current: 888 mA
-
Typical no-load input current: 50 mA
-
Protection: short circuit and overload
-
Overload protection threshold: 110–250% of rated output power
-
Protection mode: hiccup mode with automatic recovery
-
Maximum external capacitive load: 1,000 µF
-
Construction: five-sided shielded metal DIP24 module
-
Mounting: through-hole PCB mounting
-
Number of physical leads: 8
-
Cooling: fanless natural convection
-
Operating temperature: −40 °C to +71 °C, with load derating
-
Dimensions: 31.8 × 20.3 × 12.2 mm
-
Weight: approximately 17.5 g
-
Electromagnetic compatibility: BS EN/EN 55032 Class B, FCC Part 15 Class B
Target applications
-
Isolated 12 V DC to 5 V DC voltage conversion
-
Industrial automation and control systems
-
Galvanically isolated electronic circuits
-
Microprocessor and digital electronic systems
-
Industrial measurement and monitoring instruments
-
Communication and data modules
-
Sensor and detection systems
-
Embedded electronics and OEM equipment
-
Electronic systems with separate reference potentials
-
Electronics development and testing assemblies
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Operating temperature: | -40~71 °C |
| Dimensions: | 31,8x20,3x12,2 mm |
| Output voltage DC: | -5 V |
| Output current: | 1,6 A |
| Series: | SCW |
| DC input voltage: | 9~18 V |
| Power of convertor: | 8 W |
| Number of outputs: | 1 |
| Isolation: | 1000 V |
| Weight: | 17,5 g |
| Efficiency (typ.): | 75 % |
| Model series: | SCW-08 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | CN |
| Small packing quantity: | 15 |
| Customs nomenclature: | 85044095 |
Files for download
| SCW08-SPEC.pdf |
PDF, 81.69 kB |