MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

RQ-85D

Stock number: C009677

Manufacturer: MEANWELL


€32.70 incl. VAT €27.02 Excl. VAT


To order

To place an order, fill in the inquiry form and our sales team will contact you.

In our warehouse 0 pcs External warehouse 0 pcs

We will confirm the exact delivery date in our offer.


Product description

The MEAN WELL RQ-85D is a compact quad-output AC/DC switching power supply from the RQ-85 series, delivering a combined rated output power of 84 W for industrial electronics, control systems, measurement equipment and embedded electronic devices. It provides four voltage rails: +5 V DC / 6 A, +12 V DC / 2 A, +24 V DC / 1 A and −12 V DC / 0.5 A. This combination enables a single power supply to operate digital logic, microprocessor systems, analogue circuits, sensors and auxiliary equipment requiring different supply voltages. The unit is housed in a perforated metal enclosure and designed for chassis mounting or installation inside equipment cabinets.

The RQ-85D supports a universal 88–264 V AC input at 47–63 Hz and can also operate from a 125–373 V DC supply. Its wide input range makes it suitable for electronic equipment used with different mains supply systems. The +5 V output can be adjusted using an integrated potentiometer over a range of 4.75–5.5 V DC, allowing the supply voltage to be matched to the requirements of connected electronics. Typical 78% efficiency and switching technology support efficient operation. The 84 W combined power rating applies to the simultaneous loading of all four outputs, so both the individual output current limits and the total power limit must be considered when designing the equipment.

The MEAN WELL RQ-85D incorporates short-circuit, overload and overvoltage protection to help protect the power supply system and connected equipment. Overload protection operates at 110–150% of rated output power and uses a hiccup protection mode with automatic recovery once the fault has been cleared. An integrated power-on LED indicator makes it easier to check operating status during installation and maintenance. Galvanic isolation between input and output provides a withstand voltage of 3,000 V AC, supporting safe separation of the mains and low-voltage sections of the equipment. The design meets the requirements of IEC/UL 62368-1 safety standards and applicable electromagnetic compatibility requirements.

The power supply uses natural convection cooling, allowing fanless operation without mechanical noise. It supports an operating temperature range of −25 to +70°C, subject to derating at higher ambient temperatures. Its construction incorporates long-life 105°C electrolytic capacitors, 5G vibration resistance and full-load testing to support long-term operational reliability. The compact metal enclosure measures 159 × 97 × 38 mm and weighs approximately 600 g, making integration into industrial and electronic assemblies straightforward. The AC input, protective earth and all output rails are connected through a screw terminal block. The manufacturer provides a 3-year warranty. Combining four output voltages, 84 W power capacity, universal input and integrated protection functions, the RQ-85D is a practical solution for electronic systems requiring multiple power rails from a single supply.

Key features

  • Product type: AC/DC switching power supply

  • Manufacturer series: RQ-85

  • Construction: enclosed power supply with perforated metal case

  • Number of outputs: 4

  • Combined rated output power: 84 W

  • Output CH1: +5 V DC / 6 A

  • Output CH2: +12 V DC / 2 A

  • Output CH3: +24 V DC / 1 A

  • Output CH4: −12 V DC / 0.5 A

  • CH1 current range: 0–10 A

  • CH2 current range: 0–4 A

  • CH3 current range: 0–1.5 A

  • CH4 current range: 0–1 A

  • Simultaneous output loading: 84 W maximum combined

  • CH1 output voltage adjustment: 4.75–5.5 V DC

  • CH1 output voltage tolerance: ±2%

  • CH2 output voltage tolerance: +7% / −3%

  • CH3 output voltage tolerance: ±8%

  • CH4 output voltage tolerance: ±5%

  • CH1 ripple and noise: 80 mVp-p maximum

  • CH2 ripple and noise: 120 mVp-p maximum

  • CH3 ripple and noise: 150 mVp-p maximum

  • CH4 ripple and noise: 80 mVp-p maximum

  • AC input voltage range: 88–264 V AC

  • DC input voltage range: 125–373 V DC

  • Input frequency: 47–63 Hz

  • Typical efficiency: 78%

  • Typical input current: 2.5 A at 115 V AC / 1.5 A at 230 V AC

  • Typical inrush current: 50 A at 230 V AC, cold start

  • Leakage current: less than 2 mA at 240 V AC

  • Switching frequency: approximately 60 kHz

  • Protection functions: short circuit, overload, overvoltage

  • Overload protection threshold: 110–150% of rated power

  • Overload protection mode: hiccup, automatic recovery

  • Input-to-output isolation: 3,000 V AC

  • Input-to-FG withstand voltage: 2,000 V AC

  • Output-to-FG withstand voltage: 500 V AC

  • Power-on LED indicator: yes

  • Cooling method: natural convection, fanless

  • Operating temperature: −25 to +70°C, subject to derating

  • Operating humidity: 20–90% RH, non-condensing

  • Storage temperature: −40 to +85°C

  • Vibration resistance: 5G

  • Electrolytic capacitors: long-life, 105°C rated

  • Mounting: chassis or equipment mounting

  • Connection: screw terminal block

  • Case material: metal

  • Dimensions: 159 × 97 × 38 mm

  • Approximate weight: 600 g

  • Safety standards: IEC/UL 62368-1

  • EMC emissions: EN 55032 Class B

  • Manufacturer's warranty: 3 years

Target applications

  • Industrial control systems and automation equipment

  • Embedded electronics requiring multiple supply rails

  • Microprocessor and digital control units

  • Analogue circuits requiring bipolar power supplies

  • Measurement, testing and laboratory instruments

  • Sensor and communication modules

  • Electronic systems combining 5 V, 12 V and 24 V rails

  • Industrial control panels and signalling equipment

  • Telecommunications and data electronics

  • OEM manufacturing of electronic and industrial equipment


Parameters

Product parameters

Description: AC/DC power supply in a metal box
Operating temperature: -25~70 °C
Dimensions: 159x97x38 mm
Output voltage DC: -12 V, -5 V, 24 V
Output current: 500 mA, 2 A, 1 A, 6 A
Series: RQ
AC input voltage: 88~264 V
DC input voltage: 125~373 V
Input frequency: 47~63 Hz
Power of convertor: 84 W
Number of outputs: 4
Isolation: 3000 V
Weight: 600 g
Efficiency (typ.): 78 %
Model series: RQ-85
Approval agency: CE, cURus, CB, TUV

Packaging and legislation

Typ balení: Box
Původ: TW
Small packing quantity: 24
Customs nomenclature: 85044095

Files for download


Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.