RPS-400-27
Stock number: C002603
Manufacturer: MEANWELL
€79.26 incl. VAT €65.51 Excl. VAT
Product description
The MEAN WELL RPS-400-27 is a professional medical-grade open-frame AC/DC switched-mode power supply designed primarily for medical equipment, diagnostic instruments, laboratory devices and professional electronic systems. It provides a regulated 27 V DC output with a maximum output power of 402.3 W when suitable forced-air cooling is provided. Its compact open-frame construction, high efficiency and medical safety characteristics make it suitable for integration into modern electronic equipment.
The power supply offers two output ratings depending on the cooling arrangement. With natural convection cooling, it delivers 27 V / 9.3 A, equivalent to 251.1 W. With 25 CFM forced-air cooling, the output increases to 27 V / 14.9 A, delivering 402.3 W. This flexibility allows equipment designers to match output capability to the thermal conditions and requirements of the installation.
The unit accepts a wide 80–264 V AC or 113–370 V DC input range. Integrated active power factor correction (PFC) supports efficient mains power utilisation. 93.5% typical efficiency helps reduce energy losses and supports effective thermal management.
A key advantage of the RPS-400 series is its compliance with the medical safety requirements of IEC/EN 60601-1 and 2× MOPP (Means of Patient Protection). The power supply provides low leakage current and electrical isolation suitable for medical systems with enhanced safety requirements. It can also be incorporated into equipment with BF-type applied parts, provided the complete system is appropriately designed.
The compact open-frame design uses a printed circuit board without a fully enclosed housing. Measuring 127 × 76.2 × 35 mm, it follows the standard 5″ × 3″ footprint, simplifying integration into medical instruments and industrial electronics. An external fan powered from the auxiliary output can be used to provide the airflow required for maximum output power.
The output voltage is adjustable from 25.6 to 28.4 V DC. Remote Sense helps compensate for voltage drops along output cables. Additional features include a PS-ON remote switching input, Power Good and Power Fail status signals and a 5 V DC standby output for integration into control systems.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. Its −30 to +70 °C operating temperature range, subject to derating, and maximum operating altitude of 4000 m support a wide range of professional applications.
The standard RPS-400-27 is supplied as an open-frame power supply without an integrated fan. Separate variants within the RPS-400 series provide metal enclosures or integrated cooling fans.
Combining a 27 V DC output, up to 402.3 W output power, 93.5% efficiency, 2× MOPP medical safety, active PFC and compact construction, the MEAN WELL RPS-400-27 provides a reliable solution for manufacturers of medical devices, laboratory instruments and professional electronics.
Key features
-
Manufacturer: MEAN WELL
-
Model: RPS-400-27
-
Product series: RPS-400
-
Product type: medical-grade AC/DC switched-mode power supply
-
Construction: open-frame
-
Rated output voltage: 27 V DC
-
Output current with convection cooling: 9.3 A
-
Output power with convection cooling: 251.1 W
-
Output current with forced-air cooling: 14.9 A
-
Output power with forced-air cooling: 402.3 W
-
Required airflow for maximum power: 25 CFM
-
Number of main outputs: 1
-
Adjustable output voltage range: 25.6–28.4 V DC
-
Typical efficiency: 93.5%
-
Ripple and noise: 200 mV peak-to-peak maximum
-
Output voltage tolerance: ±1%
-
Line regulation: ±0.5%
-
Load regulation: ±1%
-
AC input voltage range: 80–264 V AC
-
DC input voltage range: 113–370 V DC
-
Input frequency: 47–63 Hz
-
Power factor correction: active PFC
-
Power factor at full load: > 0.94 at 230 V AC
-
Typical input current: 2.1 A at 230 V AC
-
Standby output: 5 V / 0.6 A without fan; 5 V / 1 A with 25 CFM airflow
-
External fan supply: 12 V / 0.5 A
-
Remote switching: PS-ON
-
Voltage drop compensation: Remote Sense
-
Status signals: Power Good / Power Fail
-
Short-circuit protection: yes
-
Overload protection: 105–135% of rated output power
-
Overvoltage protection threshold: 29.7–35.1 V DC
-
Overtemperature protection: yes
-
Medical safety standard: IEC/EN 60601-1
-
Patient protection: 2× MOPP
-
Earth leakage current: < 200 µA at 264 V AC / 50 Hz
-
Touch current: < 70 µA at 264 V AC
-
Operating temperature: −30 to +70 °C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Maximum operating altitude: 4000 m
-
Dimensions: 127 × 76.2 × 35 mm
-
Manufacturer's warranty: 3 years
Target applications
-
Medical instruments and diagnostic equipment
-
Patient monitoring systems
-
Laboratory and analytical instruments
-
Medical electronics requiring 2× MOPP protection
-
Embedded 27 V DC power systems
-
Industrial measuring and testing equipment
-
Control and monitoring electronics
-
Professional electronic equipment
-
OEM manufacturing of medical devices
-
Automated diagnostic systems
-
Communication and data equipment
-
Compact electronic systems requiring high power density
Parameters
Product parameters
| Description: | AC/DC power supply openframe |
| Operating temperature: | -30~70 °C |
| Dimensions: | 127x76,2x35 mm |
| Output voltage DC: | 27 V |
| Output current: | 9,3 A |
| Series: | RPS |
| AC input voltage: | 80~264 V |
| DC input voltage: | 113~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 251 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 390 g |
| Efficiency (typ.): | 93,5 % |
| Model series: | RPS-400 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 36 |
| Customs nomenclature: | 85044095 |
Files for download
| RPS-400-spec.pdf |
PDF, 438.5 kB |