- Doprava zdarma
RPS-400-24-SF
Stock number: C002601
Manufacturer: MEANWELL
€94.62 incl. VAT €78.20 Excl. VAT
Product description
The MEAN WELL RPS-400-24-SF is a high-performance medical-grade AC/DC switching power supply designed for professional medical equipment, diagnostic instruments, industrial electronics and applications requiring enhanced electrical safety. It provides a regulated 24V DC output, delivering 16.7A rated current and 400.8W output power with appropriate forced-air cooling. The SF version features a metal enclosure with an integrated side-mounted cooling fan, providing the airflow required for high-power operation.
The power supply supports a universal input voltage range of 80–264V AC / 113–370V DC and incorporates active power factor correction (PFC). It achieves 93% typical efficiency, helping to minimise energy losses and heat generation. Its output voltage can be adjusted from 22.8 to 25.2V DC. Maximum ripple and noise of 150mVp-p, ±2% output voltage tolerance, and regulated output performance support dependable operation of sensitive electronic circuits.
A key advantage of the RPS-400 series is compliance with IEC/EN 60601-1 medical safety requirements, providing 2× MOPP isolation between input and output. The power supply offers 4kV AC input-to-output isolation and very low leakage currents. With appropriate overall system design, it is also suitable for medical equipment incorporating BF-type applied parts. The design supports integration into Class I or Class II equipment, depending on the selected configuration and the requirements of the finished device.
For professional system integration, the RPS-400-24-SF includes Remote Sense for compensating voltage drops in output wiring, PS-ON for remote power control and Power Good / Power Fail signals for monitoring supply status. It also provides a 5V DC standby output and a 12V auxiliary fan supply. Integrated short-circuit, overload, overvoltage and overtemperature protection functions support safe and reliable operation.
The MEAN WELL RPS-400-24-SF operates over an ambient temperature range of −30 to +70°C, subject to the manufacturer's derating curve. Its integrated cooling fan is automatically controlled according to load and enables full output power under the specified airflow conditions. With 160 × 86 × 43mm dimensions, an approximate 640g weight, high efficiency and a three-year manufacturer's warranty, it is a practical solution for medical instruments and professional electronic systems with demanding power requirements.
Key features
-
Device type: medical-grade AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: RPS-400
-
Model: RPS-400-24-SF
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 24V DC
-
Rated output current: 16.7A with forced-air cooling
-
Rated output power: 400.8W with forced-air cooling
-
Output current with convection cooling: 10.5A
-
Output power with convection cooling: 252W
-
Required airflow for full output: 25CFM
-
Number of main outputs: 1
-
Output voltage adjustment: 22.8–25.2V DC
-
AC input voltage range: 80–264V AC
-
DC input voltage range: 113–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 93%
-
Power factor correction: active PFC
-
Power factor: greater than 0.94 at 230V AC / greater than 0.98 at 115V AC, full load
-
Ripple and noise: 150mVp-p maximum
-
Output voltage tolerance: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±1%
-
Auxiliary standby output: 5V DC / 1A with 25CFM cooling
-
Auxiliary fan supply: 12V DC / 0.5A
-
Remote ON/OFF control: PS-ON
-
Remote voltage compensation: Remote Sense
-
Status signals: Power Good / Power Fail
-
Power indication: LED
-
Power consumption with PS-ON disabled: below 0.5W
-
AC input current: 4.2A typical at 115V AC / 2.1A at 230V AC
-
Inrush current: 70A typical at 230V AC, cold start
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection threshold: 105–135% of rated output power
-
Overload protection mode: hiccup with automatic recovery
-
Overvoltage protection threshold: 26.4–31.2V
-
Overvoltage protection mode: output shutdown, input power restart required
-
Overtemperature protection: automatic recovery after cooling
-
Input-to-output isolation level: 2× MOPP
-
Input-to-output withstand voltage: 4kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 1.5kV AC
-
Medical safety standard: IEC/EN 60601-1
-
Suitability for BF applications: subject to appropriate system design
-
EMC: EN 55011, Class B in Class I configuration
-
Construction: metal enclosure with side-mounted fan
-
Cooling: integrated load-controlled fan
-
Operating temperature: −30 to +70°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Maximum operating altitude: 4,000m
-
Vibration resistance: 2G
-
Mounting: chassis or equipment mounting
-
Dimensions: 160 × 86 × 43mm
-
Weight: approximately 640g
-
Manufacturer's warranty: 3 years
Target applications
-
Medical diagnostic and monitoring equipment
-
Haemodialysis machines
-
Sleep apnoea treatment devices
-
Medical computers and monitors
-
Electrically adjustable hospital beds
-
Medical pumps and drive systems
-
Laboratory and analytical equipment
-
Industrial control and automation systems
-
Electronic equipment requiring 2× MOPP isolation
-
OEM medical and industrial electronic assemblies
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -30~70 °C |
| Dimensions: | 160x86x43 mm |
| Output voltage DC: | 24 V |
| Output current: | 10,5 A |
| Series: | RPS |
| AC input voltage: | 80~264 V |
| DC input voltage: | 113~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 252 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 640 g |
| Efficiency (typ.): | 93 % |
| Model series: | RPS-400 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 24 |
| Customs nomenclature: | 85044095 |
Files for download
| RPS-400-spec.pdf |
PDF, 438.5 kB |