RPS-400-24
Stock number: C002599
Manufacturer: MEANWELL
€79.26 incl. VAT €65.51 Excl. VAT
Product description
The MEAN WELL RPS-400-24 is a high-performance medical-grade open-frame AC/DC switching power supply designed for integration into medical instruments, diagnostic systems and professional electronic equipment. It provides a regulated 24V DC output. With natural convection cooling, it delivers 10.5A and 252W, while 25CFM external forced-air cooling increases output capability to 16.7A and 400.8W.
The power supply supports a wide input voltage range of 80–264V AC / 113–370V DC and incorporates active power factor correction (PFC). Its 93% typical efficiency helps minimise energy losses and heat generation. The output voltage can be adjusted from 22.8 to 25.2V DC, allowing it to meet specific equipment requirements. Maximum ripple and noise of 150mVp-p support stable operation of electronic circuits.
An important advantage of the RPS-400-24 is its design in accordance with IEC/EN 60601-1 medical safety requirements, providing 2× MOPP isolation between input and output. The power supply offers 4kV AC input-to-output isolation and low leakage currents, supporting integration into medical equipment, including systems with BF-type applied parts, subject to appropriate overall equipment design and safety assessment.
The open-frame PCB construction, with a compact 5 × 3-inch footprint, enables straightforward integration into professional electronic equipment. To achieve the full 400.8W output power, 25CFM external forced-air cooling is required. The unit provides a 5V DC auxiliary standby output, a 12V DC auxiliary fan supply, Remote Sense for compensating voltage drops in output wiring and PS-ON for remote power control. Power Good / Power Fail status signals are also available for monitoring power supply operation.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. During overload conditions, the power supply operates in hiccup mode with automatic recovery after the fault is removed. The unit supports an operating temperature range of −30 to +70°C, subject to the manufacturer's derating curve, and operation at altitudes of up to 4,000m.
With compact 127 × 76.2 × 35mm dimensions, an approximate 390g weight, 2× MOPP medical-grade isolation and a three-year manufacturer's warranty, the MEAN WELL RPS-400-24 is a practical solution for professional medical and industrial electronic assemblies requiring 24V DC power.
Key features
-
Device type: medical-grade AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: RPS-400
-
Model: RPS-400-24
-
Construction: open-frame PCB power supply
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 24V DC
-
Output current with convection cooling: 10.5A
-
Output power with convection cooling: 252W
-
Output current with forced-air cooling: 16.7A
-
Output power with forced-air cooling: 400.8W
-
Required airflow for full output: 25CFM
-
Number of main outputs: 1
-
Output voltage adjustment range: 22.8–25.2V DC
-
AC input voltage range: 80–264V AC
-
DC input voltage range: 113–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 93%
-
Power factor correction: active PFC
-
Power factor: greater than 0.94 at 230V AC / greater than 0.98 at 115V AC, full load
-
Ripple and noise: 150mVp-p maximum
-
Output voltage tolerance: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±1%
-
Auxiliary standby output: 5V DC / 0.6A without forced-air cooling; up to 1A with 25CFM airflow
-
Auxiliary fan supply: 12V DC / 0.5A
-
Remote ON/OFF control: PS-ON
-
Remote voltage compensation: Remote Sense
-
Power status signals: Power Good / Power Fail
-
Power consumption when disabled via PS-ON: below 0.5W
-
Typical AC input current: 4.2A at 115V AC / 2.1A at 230V AC
-
Typical inrush current: 35A at 115V AC / 70A at 230V AC
-
Typical set-up time: 1,000ms at 230V AC / 1,500ms at 115V AC
-
Typical output rise time: 30ms
-
Typical hold-up time: 16ms at 230V AC and 115V AC
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection threshold: 105–135% of rated output power
-
Overload protection mode: hiccup with automatic recovery
-
Overvoltage protection threshold: 26.4–31.2V
-
Overtemperature protection: output shutdown with automatic recovery after cooling
-
Input-to-output isolation level: 2× MOPP
-
Input-to-earth isolation level: 1× MOPP
-
Output-to-earth isolation level: 1× MOPP
-
Input-to-output withstand voltage: 4kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 1.5kV AC
-
Earth leakage current: below 200µA at 264V AC / 50Hz
-
Touch current: below 70µA at 264V AC
-
Medical safety standard: IEC/EN 60601-1
-
Electronic equipment safety standard: IEC/EN/UL 62368-1
-
EMC: EN 55011, Class B with appropriate Class I configuration
-
Suitability for BF applications: subject to appropriate overall equipment design
-
Supported equipment protection classes: Class I and Class II, depending on system design
-
Cooling: natural convection or external forced-air cooling
-
Operating temperature: −30 to +70°C, subject to derating
-
Storage temperature: −40 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Maximum operating altitude: 4,000m
-
Vibration resistance: 2G
-
Mounting: equipment integration using PCB mounting points
-
Dimensions: 127 × 76.2 × 35mm
-
Weight: approximately 390g
-
Manufacturer's warranty: 3 years
Target applications
-
Medical diagnostic and monitoring equipment
-
Medical pumps and drive systems
-
Haemodialysis machines
-
Sleep apnoea treatment devices
-
Medical computers and monitors
-
Electrically adjustable hospital beds
-
Laboratory and analytical equipment
-
Medical measurement and testing systems
-
Industrial electronics requiring 24V DC
-
OEM medical and industrial electronic assemblies
Parameters
Product parameters
| Description: | AC/DC power supply openframe |
| Operating temperature: | -30~70 °C |
| Dimensions: | 127x76,2x35 mm |
| Output voltage DC: | 24 V |
| Output current: | 10,5 A |
| Series: | RPS |
| AC input voltage: | 80~264 V |
| DC input voltage: | 113~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 252 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 390 g |
| Efficiency (typ.): | 93 % |
| Model series: | RPS-400 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 36 |
| Customs nomenclature: | 85044095 |
Files for download
| RPS-400-spec.pdf |
PDF, 438.5 kB |