RPS-400-15
Stock number: C002591
Manufacturer: MEANWELL
€77.28 incl. VAT €63.87 Excl. VAT
Product description
The MEAN WELL RPS-400-15 is a high-performance medical-grade open-frame AC/DC switching power supply designed for integration into medical instruments, diagnostic systems, laboratory equipment and professional electronics. It provides a regulated 15V DC output. With natural convection cooling, it delivers 16.7A and 250.5W, while 25CFM external forced-air cooling increases output capability to 26.7A and 400.5W.
The power supply supports a wide input voltage range of 80–264V AC / 113–370V DC and incorporates active power factor correction (PFC). Its 92% typical efficiency helps minimise energy losses and heat generation. The output voltage can be adjusted from 14.3 to 15.8V DC, allowing it to meet specific equipment requirements. Maximum ripple and noise of 120mVp-p support stable operation of electronic circuits.
An important advantage of the RPS-400-15 is its design in accordance with IEC/EN 60601-1 medical safety requirements, providing 2× MOPP isolation between input and output. The power supply offers 4kV AC input-to-output isolation and low leakage currents, supporting integration into medical equipment, including systems with BF-type applied parts, subject to appropriate overall equipment design and safety assessment.
The open-frame PCB construction, with a compact 5 × 3-inch footprint, enables straightforward integration into professional electronic equipment. To achieve the full 400.5W output power, 25CFM external forced-air cooling is required. The unit provides a 5V DC auxiliary standby output, a 12V DC auxiliary fan supply, Remote Sense for compensating voltage drops in output wiring and PS-ON for remote power control. A Power Good status signal is also available for power monitoring.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. During overload conditions, the power supply enters a protective operating mode and automatically recovers after the fault is removed. The unit supports an operating temperature range of −30 to +70°C, subject to the manufacturer's derating curve.
With compact 127 × 76.2 × 35mm dimensions, high efficiency, 2× MOPP medical-grade isolation and a three-year manufacturer's warranty, the MEAN WELL RPS-400-15 is a practical solution for medical and industrial electronic assemblies requiring stable 15V DC power.
Key features
-
Device type: medical-grade AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: RPS-400
-
Model: RPS-400-15
-
Construction: open-frame PCB power supply
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 15V DC
-
Output current with convection cooling: 16.7A
-
Output power with convection cooling: 250.5W
-
Output current with forced-air cooling: 26.7A
-
Output power with forced-air cooling: 400.5W
-
Required airflow for full output: 25CFM
-
Number of main outputs: 1
-
Output voltage adjustment range: 14.3–15.8V DC
-
AC input voltage range: 80–264V AC
-
DC input voltage range: 113–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 92%
-
Power factor correction: active PFC
-
Ripple and noise: 120mVp-p maximum
-
Output voltage tolerance: ±3%
-
Line regulation: ±0.5%
-
Load regulation: ±1%
-
Auxiliary standby output: 5V DC
-
Auxiliary fan supply: 12V DC
-
Remote ON/OFF control: PS-ON
-
Remote voltage compensation: Remote Sense
-
Power status indication: Power Good
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Input-to-output isolation level: 2× MOPP
-
Input-to-output withstand voltage: 4kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 1.5kV AC
-
Medical safety standard: IEC/EN 60601-1
-
Suitability for BF applications: subject to appropriate overall equipment design
-
Cooling: natural convection or external forced-air cooling
-
Operating temperature: −30 to +70°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Mounting: equipment integration using PCB mounting points
-
Dimensions: 127 × 76.2 × 35mm
-
Manufacturer's warranty: 3 years
Target applications
-
Medical diagnostic and monitoring equipment
-
Medical pumps and drive systems
-
Haemodialysis machines
-
Sleep apnoea treatment devices
-
Medical computers and monitors
-
Electrically adjustable hospital beds
-
Laboratory and analytical equipment
-
Medical measurement and testing systems
-
Industrial electronic systems requiring 15V DC
-
OEM medical and industrial electronic assemblies
Parameters
Product parameters
| Description: | AC/DC power supply openframe |
| Operating temperature: | -30~70 °C |
| Dimensions: | 127x76,2x35 mm |
| Output voltage DC: | -15 V |
| Output current: | 16,7 A |
| Series: | RPS |
| AC input voltage: | 80~264 V |
| DC input voltage: | 113~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 251 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 390 g |
| Efficiency (typ.): | 92 % |
| Model series: | RPS-400 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 36 |
| Customs nomenclature: | 85044095 |
Files for download
| RPS-400-spec.pdf |
PDF, 438.5 kB |