- Doprava zdarma
RCP-2000-48
Stock number: C003881
Manufacturer: MEANWELL
€634.10 incl. VAT €524.05 Excl. VAT
Product description
The MEAN WELL RCP-2000-48 is a high-power rack-mountable AC/DC front-end rectifier designed for professional power systems requiring high output capacity, redundancy, remote management and hot-swap capability. The 48 V version provides a 48 V DC output, up to 42 A and a maximum rated output power of 2016 W. Its low-profile 1U design allows standalone use or integration into compatible MEAN WELL 19-inch rack power systems.
The output voltage can be adjusted using the built-in potentiometer across a 42~56 V DC range. The RCP-2000-48 achieves a typical efficiency of 92%, with maximum ripple and noise of 300 mVp-p, output voltage tolerance of ±1%, line regulation of ±0.5% and load regulation of ±0.5%. The output voltage can also be electronically programmed to approximately 90~110% of the nominal value, simplifying integration into centrally managed power systems.
The power supply operates from a wide 90~264 V AC input at 47~63 Hz and features built-in active PFC, providing a typical power factor of 0.98 at 230 V AC under full load. Full output capability of the 48 V version depends on the AC input voltage, with output derating required at lower mains voltages.
A major advantage of the RCP-2000-48 is its suitability for high-power redundant and parallel power systems. An integrated OR-ing FET supports hot-swap operation, allowing a power module to be replaced in a compatible rack system without shutting down the complete power architecture. Active current sharing supports parallel operation, with RCP-2000 system configurations scaling up to 18 kW.
For integration into managed systems, the unit provides PMBus communication, Remote ON/OFF, Remote Sense, programmable output voltage and comprehensive status monitoring. AC OK, DC OK, Fan Fail and OTP Alarm signals allow the host system to monitor power supply status. Remote Sense compensates for up to 0.5 V of voltage drop in the load wiring. Auxiliary outputs of 5 V / 0.3 A and 12 V / 0.8 A are also available.
Cooling is provided by a built-in DC fan, whilst the unit supports an operating temperature range of −40~+70 °C with the specified derating. Protection functions include overload, overvoltage and overtemperature protection. At approximately 105~125% overload, constant-current limiting is activated and the output shuts down after approximately five seconds, requiring input power cycling for recovery.
The compact module measures 295 × 127 × 41 mm, providing a low-profile 1U form factor. With more than 2 kW of output power, 48 V output, PMBus communication, hot-swap capability, active current sharing and remote monitoring, the RCP-2000-48 is particularly suitable for data, telecommunications, industrial and centralised power systems. MEAN WELL provides a 5-year manufacturer warranty.
Key features
- Type: rack-mountable industrial AC/DC power supply / front-end rectifier
- Series: RCP-2000
- Output voltage: 48 V DC
- Output current: 0~42 A
- Rated output power: 2016 W
- Output voltage adjustment: 42~56 V DC
- Programmable output: approximately 90~110%
- Input voltage: 90~264 V AC
- Input frequency: 47~63 Hz
- Typical efficiency: 92%
- Active PFC: yes, typically PF 0.98 at 230 V AC
- Ripple and noise: max. 300 mVp-p
- Output voltage tolerance: ±1%
- Line regulation: ±0.5%
- Load regulation: ±0.5%
- PMBus communication: yes
- Remote ON/OFF: yes
- Remote Sense: yes, compensation up to 0.5 V
- Hot-swap: yes, integrated OR-ing FET
- Active current sharing: yes
- Status signals: AC OK, DC OK, Fan Fail and OTP Alarm
- Auxiliary outputs: 5 V / 0.3 A and 12 V / 0.8 A
- Cooling: built-in DC fan
- Operating temperature: −40~+70 °C with derating
- Protection against overload, overvoltage and overtemperature
- Dimensions: 295 × 127 × 41 mm
- Form factor: low-profile 1U
- Manufacturer warranty: 5 years
Target applications
- 19-inch rack power systems
- Telecommunications and data infrastructure
- Industrial control and automation systems
- Centralised 48 V DC power distribution
- Server and networking systems
- Equipment requiring redundant power
- Systems requiring hot-swap operation
- High-power parallel power architectures
- Applications requiring PMBus monitoring and remote control
- OEM industrial and communications equipment
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~70 °C |
| Dimensions: | 295x127x41 mm |
| Output voltage DC: | 48 V |
| Output current: | 42 A |
| Series: | RCP |
| AC input voltage: | 90~264 V |
| DC input voltage: | 127~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 2016 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 2000 g |
| Efficiency (typ.): | 92 % |
| Model series: | RCP-2000 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | TW |
| Small packing quantity: | 6 |
| Customs nomenclature: | 85044095 |
Files for download
| RCP-2000-spec.pdf |
PDF, 198.77 kB |