- Doprava zdarma
RCP-1000-48
Stock number: C003874
Manufacturer: MEANWELL
€317.05 incl. VAT €262.03 Excl. VAT
Product description
The MEAN WELL RCP-1000-48 is a high-performance industrial AC/DC switching power supply from the RCP-1000 series, designed for rack-mounted power systems, telecommunications infrastructure, industrial automation and redundant power architectures. It provides a regulated 48 V DC output, a rated 21 A output current and 1008 W output power. This front-end plug-in power module features a low-profile 1U design intended for use with compatible 19-inch rack shelves. The module itself measures 295 × 127 × 41 mm and incorporates a built-in speed-controlled cooling fan to provide forced-air cooling according to operating conditions. Its design supports hot-swap operation and enables flexible, highly available power infrastructure.
The power supply operates across a wide 90–264 V AC / 127–370 V DC input voltage range at a frequency of 47–63 Hz. Integrated active power factor correction (PFC) supports efficient power utilisation, while the RCP-1000-48 achieves a typical efficiency of 89%. The output voltage can be adjusted using the built-in adjustment control over a range of 46.3–49.7 V DC, with additional external programming allowing adjustment to 90–110% of the nominal output voltage. Its regulated output, with a voltage tolerance of ±1%, line regulation of ±0.5%, load regulation of ±0.5% and maximum ripple and noise of 300 mVp-p, provides dependable power for professional electronic equipment and industrial systems operating at 48 V DC.
A major advantage of the RCP-1000-48 is its active current-sharing capability, allowing multiple power modules to operate in parallel. A compatible 19-inch RCP-1U rack shelf can accommodate up to three modules, providing a combined rated output of up to 3024 W at 48 V DC. For larger installations, multiple rack assemblies can be connected in parallel in accordance with the manufacturer's installation instructions. An integrated OR-ing diode supports redundant power configurations and facilitates hot-swap module replacement. Additional features include Remote ON/OFF control, Remote Sense with up to 0.5 V voltage-drop compensation, AC OK and DC OK status signals, an overtemperature warning signal and a 5 V DC / 0.3 A auxiliary standby output. These functions make the module particularly suitable for professionally monitored power systems and distributed power architectures.
Operational reliability is supported by integrated short-circuit, overload, overvoltage and overtemperature protection. Overload protection operates at approximately 105–125% of rated output power, using constant-current limiting with automatic recovery once the fault condition has been removed. Overvoltage protection shuts down the output and requires input power cycling for recovery, while thermal protection automatically restores operation after cooling. The power supply is designed for an operating temperature range of −20 to +60°C, subject to the manufacturer's derating requirements. Combining 1008 W output power, a 21 A current rating, 89% efficiency, active PFC, hot-swap technology, parallel operation and a 5-year manufacturer's warranty, the MEAN WELL RCP-1000-48 provides a dependable solution for telecommunications infrastructure, data centres, industrial control systems and redundant power applications.
Key features
-
Product type: industrial rack-mount AC/DC switching power supply
-
Manufacturer series: RCP-1000
-
Design: front-end plug-in power module
-
Mounting: compatible 19-inch rack shelf
-
Module height: 1U
-
Number of main outputs: 1
-
Rated output voltage: 48 V DC
-
Rated output current: 21 A
-
Rated output power: 1008 W
-
Output current range: 0–21 A
-
Potentiometer-adjustable output voltage: 46.3–49.7 V DC
-
Programmable output voltage: 90–110% of nominal voltage
-
Output voltage tolerance: ±1%
-
Ripple and noise: 300 mVp-p maximum
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Input voltage: 90–264 V AC / 127–370 V DC
-
Input frequency: 47–63 Hz
-
Typical efficiency: 89%
-
Power factor correction: active PFC
-
Parallel operation: active output current sharing
-
Combined output of three 48 V modules in one rack: up to 3024 W
-
Redundant operation: integrated OR-ing diode
-
Live module replacement: Hot Swap / Hot Plug
-
Remote control: Remote ON/OFF
-
Voltage-drop compensation: Remote Sense, up to 0.5 V
-
Input power status: AC OK
-
Output power status: DC OK
-
Thermal warning: Over Temperature Warning
-
Auxiliary standby output: 5 V DC / 0.3 A
-
Communication interface: standard version without I²C; I²C available on models with the C suffix
-
Cooling: built-in speed-controlled fan
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection: 105–125% of rated output power, constant-current limiting
-
Overvoltage protection: 52.8–64.8 V DC, output shutdown
-
Thermal protection: automatic recovery after cooling
-
Operating temperature: −20 to +60°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Input-to-output withstand voltage: 3 kV AC
-
Safety standard: IEC/EN 62368-1
-
EMC emissions: EN 55032 Class B
-
Module dimensions: 295 × 127 × 41 mm
-
Approximate weight: 1.93 kg
-
Manufacturer's warranty: 5 years
Target applications
-
Industrial automation and control systems
-
Rack-mounted power systems and technical cabinets
-
Telecommunications and networking infrastructure
-
Data centres and server technology
-
Redundant and high-availability power systems
-
Distributed 48 V DC power architectures
-
Industrial communication and monitoring systems
-
Manufacturing equipment power infrastructure
-
Charging station and power electronics systems
-
OEM applications requiring hot swapping, parallel operation and remote monitoring
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -20~60 °C |
| Dimensions: | 295x127x41 mm |
| Output voltage DC: | 48 V |
| Output current: | 21 A |
| Series: | RCP |
| AC input voltage: | 90~264 V |
| DC input voltage: | 127~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 1008 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 1930 g |
| Efficiency (typ.): | 89 % |
| Model series: | RCP-1000 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | TW |
| Small packing quantity: | 6 |
| Customs nomenclature: | 85044095 |
Files for download
| RCP-1000-spec.pdf |
PDF, 162.86 kB |