MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

NID65-12

Stock number: C003848

Manufacturer: MEANWELL


€9.41 incl. VAT €7.78 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


NID65-spec-1_OK.jpg

€9.41 incl. VAT

Product description

The MEAN WELL NID65-12 is a compact non-isolated DC/DC converter in an economical open-frame design for direct PCB mounting. It provides a regulated 12 V DC output, up to 4.9 A and a maximum output power of 58.8 W. Its 20~53 V DC input range makes it particularly suitable for systems using nominal 24 V or 48 V DC power rails. The NID65 series combines compact dimensions, high efficiency and straightforward integration into electronic equipment.

The NID65-12 achieves a typical efficiency of 93% at 24 V DC input and approximately 95% at 48 V DC input. Output voltage tolerance is ±2%, with ±0.5% line regulation and ±0.5% load regulation. Maximum ripple and noise is 120 mVp-p. Its high efficiency helps minimise power losses and heat generation within the host equipment.

An important characteristic of the NID65-12 is its non-isolated topology, meaning that the input and output share a common ground. It is therefore well suited to applications where galvanic isolation is not required and compact size, high efficiency and cost-effective design are priorities. MEAN WELL describes the NID family as economical board-mount converters with a wide input range and efficiency of up to 97%, depending on the model.

Built-in Remote ON/OFF control allows the converter to be switched externally without disconnecting the main DC input. The converter is enabled with an open control input or a control level of 1.2~12 V DC, and disabled when the control input is pulled below 0.4 V DC. This makes the NID65-12 convenient for integration into equipment with controlled power-management functions.

Integrated protection includes overload, short-circuit and overvoltage protection. Overload protection operates at approximately 120~250% of rated output power using hiccup mode, with automatic recovery once the fault condition is removed. MEAN WELL also recommends an external 5 A input fuse.

The NID65-12 supports an operating temperature range of −30~+85 °C with the specified derating. Its compact PCB module measures only 50.8 × 26 × 11 mm and weighs approximately 19 g, making it particularly suitable for integration into space-constrained electronic assemblies. MEAN WELL provides a 3-year manufacturer warranty for the NID65 series.

Key features

  • Type: non-isolated DC/DC converter
  • Design: open-frame PCB-mount module
  • Output voltage: 12 V DC
  • Output current: 0~4.9 A
  • Rated output power: 58.8 W
  • Input voltage: 20~53 V DC
  • Suitable for nominal 24 V and 48 V DC systems
  • Typical efficiency: 93% at 24 V DC / 95% at 48 V DC
  • Ripple and noise: max. 120 mVp-p
  • Output voltage tolerance: ±2%
  • Line regulation: ±0.5%
  • Load regulation: ±0.5%
  • Switching frequency: typ. 200 kHz
  • Remote ON/OFF: yes
  • Protection against overload, short circuit and overvoltage
  • Operating temperature: −30~+85 °C with derating
  • Vibration resistance: 2G
  • Dimensions: 50.8 × 26 × 11 mm
  • Weight: 19 g
  • Manufacturer warranty: 3 years

Target applications

  • Industrial and control electronics
  • Equipment using 24 V or 48 V DC power
  • Conversion of DC power rails to 12 V DC
  • Embedded electronic systems
  • Communication and data equipment
  • Automation and measurement equipment
  • Space-constrained electronic devices
  • OEM electronics and custom PCB assemblies
  • Systems requiring Remote ON/OFF control
  • Applications where galvanic isolation is not required

Parameters

Product parameters

Description: DC/DC converter openframe
Case: SIP-11
Operating temperature: -30~85 °C
Dimensions: 50,8x11x26 mm
Output voltage DC: -12 V
Output current: 4,9 A
Series: NID
DC input voltage: 20~53 V
Power of convertor: 59 W
Number of outputs: 1
Weight: 19 g
Efficiency (typ.): 96 %
Model series: NID65

Packaging and legislation

Typ balení: Box
Původ: CN
Small packing quantity: 280
Customs nomenclature: 85044095

Files for download

PDF,
61.82 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.