NID30S48-24
Stock number: C003858
Manufacturer: MEANWELL
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL NID30S48-24 is a compact non-isolated switching DC/DC converter designed to convert DC voltage from a nominal 48 V power bus to a regulated 24 V DC output. It delivers a rated output current of 1.25 A and 30 W output power. Its compact SIP package with through-hole PCB mounting makes it suitable for industrial electronics, control systems and OEM equipment.
The converter operates with an input voltage range of 30–53 V DC, with a nominal input voltage of 48 V DC. It achieves typical efficiency of 93%, helping to reduce power losses and heat generation. The regulated 24 V output, with ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation, supports reliable operation of connected electronic circuits.
An important feature is the integrated remote ON/OFF control, which allows the converter to be switched on or off through a dedicated control input. This function simplifies integration into equipment requiring controlled power distribution, automated start-up or power management.
The converter uses a non-isolated topology, meaning that its input and output circuits share a common electrical reference. This arrangement is particularly suitable for systems requiring efficient voltage conversion within a common DC power distribution network. Applications requiring galvanic isolation should use an isolated DC/DC converter.
Its compact dimensions of 50.8 × 13 × 10.7 mm and approximate weight of 8 g allow straightforward integration into space-constrained electronic assemblies. Fanless natural convection cooling enables quiet operation. The converter operates over an ambient temperature range of −25 °C to +65 °C, subject to load derating at higher temperatures.
Built-in short-circuit, overload and overvoltage protection contributes to reliable operation. Short-circuit and overload protection operate in hiccup mode with automatic recovery once the fault has been removed.
The MEAN WELL NID30S48-24 provides a practical solution for 48 V DC to 24 V DC conversion in industrial electronic equipment requiring compact dimensions, high efficiency, PCB mounting and remote power control.
Key features
-
Product type: non-isolated switching DC/DC converter
-
Output voltage: 24 V DC
-
Rated output current: 1.25 A
-
Rated output power: 30 W
-
Output current range: 0–1.25 A
-
Nominal input voltage: 48 V DC
-
Input voltage range: 30–53 V DC
-
Typical efficiency: 93%
-
Maximum output ripple and noise: 200 mVp-p
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Switching frequency: 250 kHz
-
Galvanic isolation: none – non-isolated converter
-
Remote ON/OFF control
-
Full-load input current: 700 mA, typical
-
No-load input current: 50 mA, typical
-
Protection: short circuit, overload and overvoltage
-
Overload protection threshold: 120–300% of rated output power, hiccup mode with automatic recovery
-
Overvoltage protection: TVS diode clamping and output shutdown
-
Cooling: fanless natural convection
-
Construction: compact SIP module
-
Mounting: through-hole PCB mounting
-
Number of pins: 11
-
Operating temperature: −25 °C to +65 °C, with load derating
-
Dimensions: 50.8 × 13 × 10.7 mm
-
Weight: approximately 8 g
-
Number of outputs: 1
-
2-year manufacturer's warranty
Target applications
-
48 V DC to 24 V DC voltage conversion
-
Industrial automation and control systems
-
24 V electronic modules
-
Equipment with 48 V DC power distribution
-
Telecommunications and communication electronics
-
OEM industrial equipment
-
Embedded electronic systems
-
Industrial measurement and monitoring modules
-
Equipment with remotely controlled power supplies
-
Electronics development and testing systems
Parameters
Product parameters
| Description: | DC/DC converter openframe |
| Case: | SIP-11 |
| Operating temperature: | -25~65 °C |
| Dimensions: | 50,8x10,7x13 mm |
| Output voltage DC: | 24 V |
| Output current: | 1,25 A |
| Series: | NID |
| DC input voltage: | 30~53 V |
| Power of convertor: | 30 W |
| Number of outputs: | 1 |
| Weight: | 8 g |
| Efficiency (typ.): | 93 % |
| Model series: | NID30 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 120 |
| Customs nomenclature: | 85044095 |
Files for download
| NID30-spec.pdf |
PDF, 67.73 kB |