NID30S24-12
Stock number: C003856
Manufacturer: MEANWELL
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL NID30S24-12 is a compact non-isolated switching DC/DC converter designed to convert DC voltage from a nominal 24 V power bus to a regulated 12 V DC output. It delivers a rated output current of 2.5 A and 30 W output power. Its compact SIP package with through-hole PCB mounting makes it suitable for industrial electronics, control systems and embedded OEM equipment.
The converter supports a wide input voltage range of 20–53 V DC, allowing operation across various DC power distribution systems. It achieves typical efficiency of 95%, helping to minimise power losses and heat generation. The regulated 12 V output, with ±2% voltage accuracy, ±0.5% line regulation and ±0.5% load regulation, supports reliable operation of connected electronic circuits.
The integrated remote ON/OFF control allows the converter to be switched on or off through a dedicated control input. This feature simplifies the design of electronic systems requiring controlled power distribution, automated start-up and efficient power management.
The converter uses a non-isolated topology, meaning that the input and output circuits share a common electrical reference. This makes it particularly suitable for voltage conversion within a common DC power distribution network, such as supplying 12 V electronics from an industrial 24 V bus.
Its compact dimensions of 50.8 × 13 × 10.7 mm and approximate weight of 8 g allow straightforward integration into space-constrained electronic assemblies. Fanless natural convection cooling enables quiet operation. The operating temperature range is −25 °C to +65 °C, subject to load derating at higher temperatures.
Built-in short-circuit, overload and overvoltage protection contributes to safe and reliable operation. Short-circuit and overload protection operate in hiccup mode with automatic recovery once the fault has been removed.
The MEAN WELL NID30S24-12 provides a practical solution for 24 V DC to 12 V DC conversion in industrial and embedded electronic systems requiring compact dimensions, high efficiency, PCB mounting and remote power control.
Key features
-
Product type: non-isolated switching DC/DC converter
-
Output voltage: 12 V DC
-
Rated output current: 2.5 A
-
Rated output power: 30 W
-
Output current range: 0–2.5 A
-
Nominal input voltage: 24 V DC
-
Input voltage range: 20–53 V DC
-
Typical efficiency: 95%
-
Maximum output ripple and noise: 120 mVp-p
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Switching frequency: 250 kHz
-
Galvanic isolation: none – non-isolated converter
-
Feature: remote ON/OFF control
-
Typical full-load input current: 1,310 mA
-
Typical no-load input current: 30 mA
-
Maximum external capacitive load: 68 µF / 16 V, low ESR
-
Recommended input fuse: 3 A
-
Protection: short circuit, overload and overvoltage
-
Overload protection threshold: 120–300% of rated output power, hiccup mode with automatic recovery
-
Overvoltage protection: output shutdown with TVS diode voltage clamping
-
Cooling: fanless natural convection
-
Construction: compact SIP module
-
Mounting: through-hole PCB mounting
-
Number of pins: 11
-
Operating temperature: −25 °C to +65 °C, with load derating
-
Dimensions: 50.8 × 13 × 10.7 mm
-
Weight: approximately 8 g
-
Number of outputs: 1
-
2-year manufacturer's warranty
Target applications
-
24 V DC to 12 V DC voltage conversion
-
Industrial automation and control systems
-
12 V electronic modules
-
Equipment with 24 V DC power distribution
-
Industrial measurement and monitoring systems
-
OEM industrial electronics
-
Embedded electronic systems
-
Communication and data modules
-
Equipment with remotely controlled power supplies
-
Electronics development and testing systems
Parameters
Product parameters
| Description: | DC/DC converter openframe |
| Case: | SIP-11 |
| Operating temperature: | -25~65 °C |
| Dimensions: | 50,8x10,7x13 mm |
| Output voltage DC: | -12 V |
| Output current: | 2,5 A |
| Series: | NID |
| DC input voltage: | 20~53 V |
| Power of convertor: | 30 W |
| Number of outputs: | 1 |
| Weight: | 8 g |
| Efficiency (typ.): | 95 % |
| Model series: | NID30 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 120 |
| Customs nomenclature: | 85044095 |
Files for download
| NID30-spec.pdf |
PDF, 67.73 kB |