MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

  • Doprava zdarma

MSP-450-3.3

Stock number: C003335

Manufacturer: MEANWELL


€168.93 incl. VAT €139.61 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse 9 pcs

Delivery from €6.50


MSP-450_OK.jpg

€168.93 incl. VAT

Product description

The MEAN WELL MSP-450-3.3 is a high-performance medical-grade enclosed AC/DC switching power supply with a single regulated output, designed for integration into medical instruments, laboratory equipment, diagnostic systems and professional electronic devices. It delivers an output voltage of 3.3V DC, a rated output current of 90A and 297W of continuous output power. Its high current capability makes it particularly suitable for equipment requiring a stable low-voltage supply for power and control electronics.

The power supply meets IEC 60601-1 medical electrical safety requirements and provides 2× MOOP isolation between input and output. An input-to-output dielectric withstand voltage of 4kV AC and low leakage currents support integration into professional medical and laboratory systems. The unit is intended as a built-in power component, with the electrical safety and electromagnetic compatibility of the complete equipment assessed separately.

The universal input voltage range of 85–264V AC / 120–370V DC supports operation across a wide range of mains supplies. Integrated active power factor correction (PFC) achieves a power factor above 0.95 at 230V AC under full load. The regulated output voltage can be adjusted from 2.8 to 3.8V DC, allowing configuration for specific equipment requirements. This model achieves a typical efficiency of 80%, maximum ripple and noise of 80mVp-p, and an output voltage tolerance of ±2%.

The integrated Remote Sense function compensates for voltage drops of up to 0.5V along the output cables, particularly important at the rated output current of 90A. Remote ON/OFF allows external switching of the main output, while the DC OK signal provides power supply status monitoring. An additional 5V DC / 0.3A standby output is available for auxiliary control and monitoring circuits.

The power supply incorporates protection against short circuits, overload, overvoltage and overtemperature. Its integrated current-limiting circuit supports reliable operation under changing load conditions. The 218 × 105 × 41mm metal enclosure features a low-profile design for integration into professional equipment. A built-in cooling fan with automatic load- and temperature-dependent switching provides effective thermal management. With an ambient operating temperature range of −40 to +70°C, compact construction and a five-year manufacturer's warranty, the MSP-450-3.3 is a practical solution for electronic systems with demanding current requirements.

Key features

  • Power supply type: medical-grade enclosed AC/DC switching power supply

  • Product series: MSP-450

  • Output characteristic: regulated constant voltage (CV)

  • Rated output voltage: 3.3V DC

  • Rated output current: 90A

  • Output current range: 0–90A

  • Rated output power: 297W

  • Number of main outputs: 1

  • Output voltage adjustment: 2.8–3.8V DC

  • Input voltage: 85–264V AC / 120–370V DC

  • Input frequency: 47–63Hz

  • Efficiency: 80% typical

  • Active PFC: integrated power factor correction

  • Power factor: > 0.95 at 230V AC under full load

  • Ripple and noise: 80mVp-p maximum

  • Output voltage tolerance: ±2%

  • Line regulation: ±0.5%

  • Load regulation: ±1%

  • Medical safety standard: IEC 60601-1

  • Isolation level: 2× MOOP between input and output

  • Input-to-output withstand voltage: 4kV AC

  • Earth leakage current: below 300µA at 264V AC

  • Touch leakage current: below 100µA at 264V AC

  • Remote voltage compensation: Remote Sense, up to 0.5V

  • Remote control: Remote ON/OFF

  • Output status signal: DC OK

  • Auxiliary standby output: 5V DC / 0.3A

  • No-load power consumption: below 0.6W under specified conditions

  • Input surge withstand: 300V AC for five seconds

  • Protection functions: short circuit, overload, overvoltage and overtemperature

  • Overload limiting: 105–135% of rated output power, constant-current limiting with automatic recovery

  • Cooling: built-in fan with automatic switching

  • Ambient operating temperature: −40 to +70°C (subject to load derating)

  • Construction: low-profile metal enclosure

  • Mounting: chassis mounting

  • Connection: screw terminals and control connector

  • Dimensions: 218 × 105 × 41mm

  • Weight: approximately 1.19kg

  • Manufacturer's warranty: 5 years

Target applications

  • Medical instruments and diagnostic equipment

  • Laboratory and analytical equipment

  • Professional test and measurement systems

  • Electronic modules for medical devices

  • High-power electronic systems requiring 3.3V DC

  • Low-voltage circuits with high current demand

  • Automated instruments with remote power management

  • Systems requiring power supply status monitoring

  • Equipment requiring compensation for cable voltage drops

  • Custom medical and industrial electronic assemblies


Parameters

Product parameters

Description: AC/DC power supply in a metal box
Operating temperature: -40~70 °C
Dimensions: 218x105x41 mm
Output voltage DC: 3,3 V
Output current: 90 A
Series: MSP
AC input voltage: 85~264 V
DC input voltage: 120~370 V
Input frequency: 47~63 Hz
Power of convertor: 297 W
Number of outputs: 1
Isolation: 4000 V
Weight: 1190 g
Efficiency (typ.): 80 %
Model series: MSP-450

Packaging and legislation

Typ balení: Box
Původ: CN
Small packing quantity: 12
Customs nomenclature: 85044095

Files for download

PDF,
590.33 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.