- Doprava zdarma
MSP-450-12
Stock number: C003338
Manufacturer: MEANWELL
€165.96 incl. VAT €137.15 Excl. VAT
Product description
Detailed product description
The MEAN WELL MSP-450-12 is a professional medical-grade enclosed AC/DC switching power supply providing a regulated 12V DC main output, a rated current of 37.5A and 450W continuous output power. It belongs to the MSP-450 series, designed for medical electrical equipment, industrial electronics and embedded systems requiring reliable DC power. The supply operates with a constant-voltage (CV) output characteristic and incorporates a medical safety design complying with IEC 60601-1, including 2× MOOP isolation between the input and output.
The power supply accepts a wide input voltage range of 85–264V AC / 120–370V DC and incorporates active power factor correction (PFC). At full load, the power factor exceeds 0.95 at 230V AC and 0.99 at 115V AC. Its 88% typical efficiency helps minimise energy losses and heat generation. The design can also withstand a temporary 300V AC input surge for five seconds.
The output voltage can be adjusted using the integrated potentiometer over a range of 10.2–13.8V DC, allowing the supply to be configured for specific equipment requirements. It provides an output current range of 0–37.5A, ±1% output voltage tolerance and 120mVp-p maximum ripple and noise. Voltage stability is supported by ±0.3% line regulation and ±0.5% load regulation. The maximum rated output power and current must be observed when adjusting the output voltage.
The MSP-450-12 includes a Remote Sense function, allowing compensation for voltage drops along the output cables of up to 0.5V. Dedicated +S and −S sensing connections enable the supply to monitor the voltage directly at the load. This is particularly useful in high-current applications where cable resistance can cause significant voltage drops.
Additional integrated functions include Remote ON/OFF control, allowing the main output to be enabled or disabled by an external controller, and a DC OK status signal for monitoring the power supply's operating condition. The unit also provides a 5V / 0.3A auxiliary standby output, suitable for control logic, monitoring and signalling circuits. The auxiliary output remains available when the main output is disabled through Remote ON/OFF.
The supply is housed in a compact low-profile metal enclosure and incorporates a built-in cooling fan with automatic control according to load and internal temperature. This arrangement provides effective heat dissipation at high output power while adjusting fan operation to current conditions. The unit supports an ambient operating temperature range of −40 to +70°C, with load derating required under certain high-temperature and low-input-voltage conditions.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. During overload conditions, the unit limits its output current and automatically recovers once the fault is removed. Overvoltage protection operates at 14.4–16.8V, while thermal protection shuts down the output and automatically restores operation after cooling.
With 218 × 105 × 41mm dimensions, an approximate 1.19kg weight, 2× MOOP medical safety isolation, Remote Sense, Remote ON/OFF and DC OK functions and a five-year manufacturer's warranty, the MEAN WELL MSP-450-12 is a practical solution for professional 12V power systems requiring up to 37.5A.
Key features
-
Device type: medical-grade enclosed AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: MSP-450
-
Model: MSP-450-12
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 12V DC
-
Rated output current: 37.5A
-
Rated output power: 450W
-
Output current range: 0–37.5A
-
Adjustable output voltage: 10.2–13.8V DC
-
Number of main outputs: 1
-
Output voltage tolerance: ±1%
-
Ripple and noise: 120mVp-p maximum
-
Line regulation: ±0.3%
-
Load regulation: ±0.5%
-
AC input voltage range: 85–264V AC
-
DC input voltage range: 120–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 88%
-
Power factor correction: active PFC
-
Power factor at full load: >0.95 at 230V AC / >0.99 at 115V AC
-
Typical AC input current: 5A at 115V AC / 2.4A at 230V AC
-
Typical inrush current: 35A at 115V AC / 70A at 230V AC
-
Temporary input surge withstand: 300V AC for five seconds
-
Power consumption with main output disabled: below 0.5W when disabled through Remote ON/OFF
-
Typical set-up time: 1,000ms at 230V AC / 2,500ms at 115V AC
-
Typical rise time: 100ms
-
Typical hold-up time: 16ms at 115/230V AC
-
Earth leakage current: below 300µA at 264V AC
-
Touch leakage current: below 100µA at 264V AC
-
Remote control: Remote ON/OFF
-
Remote voltage sensing: Remote Sense
-
Maximum voltage drop compensation: 0.5V
-
Power status indication: DC OK, logic-level signal
-
Auxiliary standby output: 5V DC / 0.3A
-
Standby output tolerance: ±5%
-
Standby output ripple: 50mVp-p maximum
-
Control connector: CN100, 8-pin
-
Remote control connections: RC+ / RC−
-
Remote sense connections: +S / −S
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection threshold: 105–135% of rated output power
-
Overload protection mode: constant-current limiting with automatic recovery
-
Overvoltage protection threshold: 14.4–16.8V
-
Overtemperature protection: output shutdown with automatic recovery after cooling
-
Medical safety isolation: 2× MOOP between input and output
-
Input-to-output withstand voltage: 4kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 0.5kV AC
-
Insulation resistance: at least 100MΩ at 500V DC
-
Cooling: built-in fan with automatic control
-
Ambient operating temperature: −40 to +70°C, subject to derating
-
Storage temperature: −40 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Vibration resistance: 5G
-
Safety standards: IEC 60601-1, ANSI/AAMI ES60601-1
-
EMC standards: EN 55011 Class B, EN 61000-3-2/-3-3, EN 60601-1-2
-
Input connection: screw terminal block
-
Output connection: screw terminal block
-
Mounting: built-in, screw mounting
-
Enclosure: low-profile metal housing
-
Dimensions: 218 × 105 × 41mm
-
Weight: approximately 1.19kg
-
MTBF: at least 159,300 hours according to MIL-HDBK-217F at 25°C
-
Manufacturer's warranty: 5 years
Target applications
-
Medical electrical equipment requiring MOOP isolation
-
Diagnostic and laboratory equipment
-
Electronic systems for medical technology
-
Industrial control and automation systems
-
High-current 12V electronic equipment
-
Embedded electronic systems and OEM equipment
-
Industrial computers and control units
-
Measurement, test and calibration equipment
-
Electronic display and signalling systems
-
Communication and monitoring equipment
-
Custom electronic equipment requiring up to 37.5A
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~70 °C |
| Dimensions: | 218x105x41 mm |
| Output voltage DC: | -12 V |
| Output current: | 37,5 A |
| Series: | MSP |
| AC input voltage: | 85~264 V |
| DC input voltage: | 120~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 450 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 1190 g |
| Efficiency (typ.): | 88 % |
| Model series: | MSP-450 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 12 |
| Customs nomenclature: | 85044095 |
Files for download
| MSP-450-spec.pdf |
PDF, 590.33 kB |