- Doprava zdarma
MSP-300-36
Stock number: C003333
Manufacturer: MEANWELL
€121.37 incl. VAT €100.31 Excl. VAT
Product description
The MEAN WELL MSP-300-36 is a high-performance medical-grade enclosed AC/DC switching power supply with a single regulated output, designed for integration into medical instruments, laboratory equipment, diagnostic systems and professional electronic devices. It delivers an output voltage of 36V DC, a rated output current of 9A and 324W of output power. The MSP-300 series combines high power capability, active power factor correction and advanced power management functions.
The power supply meets IEC 60601-1 medical electrical safety requirements and provides 2× MOOP isolation between input and output. An input-to-output dielectric withstand voltage of 4kV AC and low leakage currents support integration into medical and laboratory systems. It is intended as a built-in power component, and the electrical safety and electromagnetic compatibility of the complete equipment must be assessed separately.
The universal input voltage range of 85–264V AC / 120–370V DC supports operation across a wide range of power systems. Integrated active power factor correction (PFC) promotes efficient use of mains power. The regulated output voltage is adjustable from 28.8 to 39.6V DC, allowing configuration for specific equipment requirements. The model achieves a typical efficiency of 88%, maximum ripple and noise of 250mVp-p, and ±1% output voltage tolerance.
The integrated Remote Sense function compensates for voltage drops of up to 0.5V along the supply cables, particularly useful for longer power connections. Remote ON/OFF allows external switching of the main output, while the DC OK signal provides output status monitoring. An additional 5V DC / 0.3A standby output is available for auxiliary control and monitoring circuits.
The power supply incorporates protection against short circuits, overload, overvoltage and overtemperature, together with an integrated current-limiting circuit. Its 199 × 105 × 41mm metal enclosure features a low-profile 1U design for integration into electronic equipment. An integrated cooling fan with automatic load- and temperature-dependent switching provides effective thermal management. With an ambient operating temperature range of −40 to +70°C, compact construction and a five-year manufacturer's warranty, the MSP-300-36 is a practical solution for professional equipment requiring a stable 36V DC supply.
Key features
-
Power supply type: medical-grade enclosed AC/DC switching power supply
-
Product series: MSP-300
-
Output characteristic: regulated constant voltage (CV)
-
Rated output voltage: 36V DC
-
Rated output current: 9A
-
Output current range: 0–9A
-
Rated output power: 324W
-
Number of main outputs: 1
-
Output voltage adjustment: 28.8–39.6V DC
-
Input voltage: 85–264V AC / 120–370V DC
-
Input frequency: 47–63Hz
-
Efficiency: 88% typical
-
Active PFC: integrated power factor correction
-
Power factor: > 0.95 at 230V AC under full load
-
Ripple and noise: 250mVp-p maximum
-
Output voltage tolerance: ±1%
-
Line regulation: ±0.2%
-
Load regulation: ±0.5%
-
Medical safety standard: IEC 60601-1
-
Isolation level: 2× MOOP between input and output
-
Input-to-output withstand voltage: 4kV AC
-
Earth leakage current: below 450µA at 264V AC
-
Touch leakage current: below 100µA at 264V AC
-
Remote voltage compensation: Remote Sense, up to 0.5V
-
Remote control: Remote ON/OFF
-
Output status signal: DC OK
-
Auxiliary standby output: 5V DC / 0.3A
-
Power consumption with main output disabled: below 0.5W under specified conditions
-
Input surge withstand: 300V AC for five seconds
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload limiting: 105–135% of rated output power, automatic recovery after fault removal
-
Cooling: integrated fan with automatic switching
-
Ambient operating temperature: −40 to +70°C (subject to load derating)
-
Construction: low-profile 1U metal enclosure
-
Mounting: chassis mounting
-
Connection: screw terminals and control connector
-
Dimensions: 199 × 105 × 41mm
-
Weight: approximately 950g
-
Manufacturer's warranty: 5 years
Target applications
-
Medical instruments and diagnostic equipment
-
Laboratory and analytical equipment
-
Professional test and measurement systems
-
Electronic modules for medical devices
-
Equipment requiring a stable 36V DC supply
-
High-power embedded control and electronic systems
-
Automated instruments with remote power management
-
Systems requiring power supply status monitoring
-
Equipment requiring compensation for cable voltage drops
-
Custom medical and industrial electronic assemblies
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~70 °C |
| Dimensions: | 199x105x41 mm |
| Output voltage DC: | 36 V |
| Output current: | 9 A |
| Series: | MSP |
| AC input voltage: | 85~264 V |
| DC input voltage: | 120~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 324 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 950 g |
| Efficiency (typ.): | 88 % |
| Model series: | MSP-300 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 15 |
| Customs nomenclature: | 85044095 |
Files for download
| MSP-300-spec.pdf |
PDF, 578.43 kB |