- Doprava zdarma
MSP-1000-48
Stock number: C003354
Manufacturer: MEANWELL
€229.37 incl. VAT €189.56 Excl. VAT
Product description
Detailed product description
The MEAN WELL MSP-1000-48 is a professional medical-grade enclosed AC/DC switching power supply providing a regulated 48V DC output, a rated current of 21A and 1008W continuous output power. It belongs to the high-power MSP-1000 series, designed for medical electrical equipment, industrial automation and embedded electronic systems. The unit operates with a constant-voltage (CV) output characteristic and combines high efficiency, medical safety isolation and advanced remote-control functions.
The design complies with IEC 60601-1 medical safety requirements and provides 2× MOPP (Means of Patient Protection) isolation between the primary and secondary circuits. This isolation level is intended to protect patients and supports integration into medical equipment requiring enhanced electrical safety. Suitability for a particular medical application must be assessed as part of the complete equipment design.
The power supply accepts a wide input voltage range of 90–264V AC / 127–370V DC and incorporates active power factor correction (PFC). At full load, the power factor exceeds 0.95 at 230V AC and 0.98 at 115V AC. Its 94% typical efficiency helps minimise heat generation and energy losses. The design can also withstand a temporary 300V AC input surge for five seconds.
The output voltage can be adjusted using the integrated potentiometer over a range of 46–56V DC, allowing the supply to be configured for specific equipment requirements. It provides an output current range of 0–21A, ±1% output voltage tolerance and 250mVp-p maximum ripple and noise. Both line regulation and load regulation are ±0.5%. The maximum rated power and current limits must be observed when adjusting the output voltage.
The MSP-1000-48 incorporates Remote Sense, allowing compensation for voltage drops along the output wiring of up to 0.5V. Dedicated sensing connections enable voltage regulation directly at the load, helping maintain a stable supply voltage in high-current applications and installations with longer output cables.
A key feature is active current sharing, allowing compatible power supplies to operate in parallel. The manufacturer specifies support for power systems delivering up to 4000W or a 3+1 redundant configuration. This capability is suitable for higher-power applications and systems requiring improved operational availability. Parallel wiring and operating conditions must follow the manufacturer's instructions.
Additional features include Remote ON/OFF control for externally enabling or disabling the main output, a DC OK status signal for monitoring the power supply and a 5V / 0.3A auxiliary standby output. The auxiliary supply can power control electronics, monitoring and signalling circuits.
The supply is housed in a compact metal enclosure and incorporates a built-in cooling fan with automatic control according to load or internal temperature. The unit supports an ambient operating temperature range of −40 to +70°C, with output derating required under certain high-temperature and low-input-voltage conditions.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. Overload protection operates through current limiting with automatic recovery once the fault is removed. Overvoltage protection operates at 58–65V and requires an input power restart. Thermal protection automatically restores operation after cooling.
With 218 × 105 × 63.5mm dimensions, 94% typical efficiency, 2× MOPP medical safety isolation, Remote Sense, Remote ON/OFF, DC OK and Current Sharing functions and a five-year manufacturer's warranty, the MEAN WELL MSP-1000-48 is a suitable solution for professional 48V power systems requiring more than 1kW of continuous output power.
Key features
-
Device type: medical-grade enclosed AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: MSP-1000
-
Model: MSP-1000-48
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 48V DC
-
Rated output current: 21A
-
Rated output power: 1008W
-
Output current range: 0–21A
-
Adjustable output voltage: 46–56V DC
-
Number of main outputs: 1
-
Output voltage tolerance: ±1%
-
Ripple and noise: 250mVp-p maximum
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
AC input voltage range: 90–264V AC
-
DC input voltage range: 127–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 94%
-
Power factor correction: active PFC
-
Power factor at full load: >0.95 at 230V AC / >0.98 at 115V AC
-
Typical AC input current: 8.5A at 115V AC / 5A at 230V AC
-
Typical inrush current: 20A at 115V AC / 40A at 230V AC
-
Temporary input surge withstand: 300V AC for five seconds
-
Typical set-up time: 1000ms at 230V AC / 2000ms at 115V AC
-
Typical rise time: 50ms
-
Typical hold-up time: 16ms at 115/230V AC
-
Remote ON/OFF: yes
-
Remote Sense: yes
-
Maximum voltage drop compensation: 0.5V
-
DC OK status signal: yes
-
Active current sharing: yes
-
Parallel operation: systems up to 4000W or a 3+1 configuration
-
Auxiliary standby output: 5V DC / 0.3A
-
Auxiliary output tolerance: ±5%
-
Auxiliary output ripple: 50mVp-p maximum
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection threshold: 105–135% of rated output power
-
Overload protection mode: current limiting with automatic recovery
-
Overvoltage protection threshold: 58–65V
-
Overvoltage recovery: input power restart required
-
Overtemperature protection: automatic recovery after cooling
-
Medical safety isolation: 2× MOPP between input and output
-
Input-to-output withstand voltage: 4.5kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 1.5kV AC
-
Cooling: built-in fan with automatic control
-
Ambient operating temperature: −40 to +70°C, subject to derating
-
Storage temperature: −40 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Vibration resistance: 5G
-
Safety standards: IEC 60601-1, ANSI/AAMI ES60601-1, CAN/CSA C22.2 No. 60601-1
-
EMC standards: EN 55011, EN 55032, EN 61000-3-2/-3-3, EN 60601-1-2
-
Mounting: built-in, screw mounting
-
Enclosure: metal housing
-
Dimensions: 218 × 105 × 63.5mm
-
Manufacturer's warranty: 5 years
Target applications
-
Medical electrical equipment requiring MOPP patient protection
-
Diagnostic and medical imaging equipment
-
CT, PET and MRI systems
-
Medical beds and operating tables
-
Laboratory, measurement and test equipment
-
Industrial control and automation systems
-
High-power 48V electronic equipment
-
Embedded electronic systems and OEM equipment
-
Industrial computers and control units
-
Communication and monitoring systems
-
Redundant and parallel power supply systems
-
Custom electronic equipment requiring up to 21A
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~70 °C |
| Dimensions: | 218x105x63,5 mm |
| Output voltage DC: | 48 V |
| Output current: | 21 A |
| Series: | MSP |
| AC input voltage: | 90~264 V |
| DC input voltage: | 127~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 1008 W |
| Number of outputs: | 1 |
| Isolation: | 4000 V |
| Weight: | 1530 g |
| Efficiency (typ.): | 94 % |
| Model series: | MSP-1000 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 8 |
| Customs nomenclature: | 85044095 |
Files for download
| MSP-1000-spec.pdf |
PDF, 171.5 kB |