MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

MSP-100-3.3

Stock number: C003312

Manufacturer: MEANWELL


€53.50 incl. VAT €44.22 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


MSP-100_ok.jpg

€53.50 incl. VAT

Product description

The MEAN WELL MSP-100-3.3 is a professional medical-grade enclosed AC/DC switching power supply with a single regulated output, designed for integration into medical instruments, laboratory equipment and professional electronic systems. It delivers an output voltage of 3.3V DC, a rated output current of 20A and 66W of continuous output power. The MSP-100 series is designed for applications requiring electrical safety, low leakage currents and stable power for sensitive electronics.

A key advantage is its design meeting IEC 60601-1 medical electrical safety requirements, with 2× MOOP isolation between input and output. An input-to-output dielectric withstand voltage of 4kV AC and low leakage currents support integration into professional medical and laboratory systems. The power supply is intended as a built-in component, and the complete end product must be assessed against its applicable safety and regulatory requirements.

The universal input voltage range of 85–264V AC / 120–370V DC enables operation across a wide range of power systems. Integrated active power factor correction (PFC) supports efficient use of mains power. The regulated output voltage can be adjusted from 3.1 to 3.8V DC, allowing configuration for specific electronic circuits. This model achieves a typical efficiency of 78%, with maximum ripple and noise of 80mVp-p.

The integrated Remote ON/OFF function allows the output to be switched on or off using an external control signal, simplifying integration into equipment with automated power management. Built-in protection against short circuits, overload and overvoltage supports dependable operation, while overtemperature protection is available as an optional feature. No-load power consumption below 0.5W contributes to energy-efficient operation.

The metal enclosure measuring 159 × 97 × 38mm is suitable for chassis mounting and integration into electronic assemblies. Fanless cooling by natural convection provides quiet operation. An ambient operating temperature range of −40 to +60°C, 105°C-rated electrolytic capacitors and a five-year manufacturer's warranty make the MSP-100-3.3 a practical choice for professional equipment requiring a stable 3.3V supply with a high output current.

Key features

  • Power supply type: medical-grade enclosed AC/DC switching power supply

  • Product series: MSP-100

  • Output characteristic: regulated constant voltage (CV)

  • Rated output voltage: 3.3V DC

  • Rated output current: 20A

  • Output current range: 0–20A

  • Rated output power: 66W

  • Number of outputs: 1

  • Output voltage adjustment: 3.1–3.8V DC

  • Input voltage: 85–264V AC / 120–370V DC

  • Input frequency: 47–63Hz

  • Efficiency: 78% typical

  • Active PFC: integrated power factor correction

  • Power factor: > 0.95 at 230V AC under full load

  • Ripple and noise: 80mVp-p maximum

  • Output voltage tolerance: +2.5% / −3.5%

  • Line regulation: ±0.5%

  • Load regulation: ±2.0%

  • Medical safety standard: IEC 60601-1

  • Isolation level: 2× MOOP between input and output

  • Input-to-output withstand voltage: 4kV AC

  • Earth leakage current: below 300µA at 264V AC

  • Touch leakage current: below 100µA at 264V AC

  • Remote control: Remote ON/OFF

  • No-load power consumption: below 0.5W

  • Input surge withstand: 300V AC for five seconds

  • Protection functions: short circuit, overload and overvoltage; optional overtemperature protection

  • Cooling: fanless, natural convection

  • Ambient operating temperature: −40 to +60°C (subject to load derating)

  • Construction: ventilated metal enclosure

  • Mounting: chassis mounting

  • Connection: screw terminals and Remote ON/OFF connector

  • Dimensions: 159 × 97 × 38mm

  • Weight: approximately 550g

  • Manufacturer's warranty: 5 years

Target applications

  • Medical instruments and diagnostic equipment

  • Laboratory and analytical equipment

  • Electronic modules for medical devices

  • Professional test and measurement systems

  • Embedded controllers requiring 3.3V DC

  • Electronic systems requiring high current at low voltage

  • Equipment requiring low leakage currents

  • Automated instruments with remote power control

  • Industrial and laboratory control systems

  • Custom electronic and medical equipment assemblies


Parameters

Product parameters

Description: AC/DC power supply in a metal box
Operating temperature: -40~60 °C
Dimensions: 159x97x38 mm
Output voltage DC: 3,3 V
Output current: 20 A
Series: MSP
AC input voltage: 85~264 V
DC input voltage: 120~370 V
Input frequency: 47~63 Hz
Power of convertor: 66 W
Number of outputs: 1
Isolation: 4000 V
Weight: 380 g
Efficiency (typ.): 78 %
Model series: MSP-100

Packaging and legislation

Typ balení: Box
Původ: CN
Small packing quantity: 24
Customs nomenclature: 85044095

Files for download

PDF,
95.7 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.