MDD03F-12
Stock number: C009601
Manufacturer: MEANWELL
€15.06 incl. VAT €12.45 Excl. VAT
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL MDD03F-12 is a compact isolated and regulated DC/DC converter from the MDD03 series, delivering 3 W output power for medical electronics, precision measurement instruments, industrial control systems and sensitive analogue circuits. It provides two symmetrical outputs of +12 V DC and −12 V DC, each rated at 125 mA, with a combined output power of 3 W. Its standard DIP24 package and through-hole PCB mounting make it suitable for electronic equipment requiring stable bipolar power rails and high electrical isolation.
The converter supports a wide 9–36 V DC input range with a 4:1 input ratio, allowing operation in systems with nominal 12 V or 24 V DC supplies. Its regulated outputs maintain stable voltage under varying input and load conditions. The manufacturer specifies ±2% output voltage accuracy, ±0.5% line regulation and ±0.5% load regulation. Maximum ripple and noise of 150 mVp-p support reliable operation of connected electronic modules. A typical efficiency of 79% contributes to efficient power conversion, while the switching frequency is approximately 250 kHz.
A major advantage of the MDD03F-12 is its reinforced input-to-output galvanic isolation, rated at 6,000 V DC or 4,200 V AC. The design supports 2× MOPP (Means of Patient Protection) requirements under IEC 60601-1, subject to the manufacturer's specified system conditions. An exceptionally low patient leakage current below 5 µA and typical 20 pF isolation capacitance are valuable in medical and sensitive measurement equipment. The converter is therefore suitable for medical monitors, diagnostic instruments, galvanically isolated analogue circuits and operational amplifiers requiring symmetrical ±12 V power supplies.
The MEAN WELL MDD03F-12 incorporates continuous short-circuit protection, overload protection and input undervoltage lockout (UVLO). Short-circuit protection allows automatic recovery once the fault is removed. The unit supports an operating temperature range of −40 to +90°C, subject to derating, and uses fanless natural convection cooling. Its plastic enclosure meets the UL94 V-0 flammability classification, measures 31.8 × 20.3 × 12.2 mm and weighs approximately 17 g. Maximum capacitive load is 47 µF per output. The manufacturer provides a 3-year warranty. Combining 3 W output power, regulated symmetrical ±12 V outputs, a wide 9–36 V DC input range and 6 kV DC isolation, the converter is a suitable choice for professional medical, measurement and industrial applications.
Key features
-
Product type: isolated regulated DC/DC converter
-
Manufacturer series: MDD03
-
Construction: encapsulated DIP24 module
-
Number of outputs: 2, symmetrical
-
Rated output power: 3 W combined
-
Output voltage 1: +12 V DC
-
Output voltage 2: −12 V DC
-
Symmetrical output voltage: ±12 V DC
-
Rated output current 1: 125 mA
-
Rated output current 2: 125 mA
-
Load range per output: 12.5–125 mA
-
Nominal input voltages: 12 V / 24 V DC
-
Input voltage range: 9–36 V DC
-
Input voltage ratio: 4:1
-
Maximum transient input voltage: 50 V DC for 100 ms
-
Typical efficiency: 79%
-
Typical no-load input current: 20 mA
-
Typical full-load input current: 316 mA
-
Switching frequency: 250 kHz
-
Output regulation: regulated
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Ripple and noise: 150 mVp-p maximum
-
Maximum capacitive load: 47 µF per output
-
Input filter: Pi type
-
Galvanic isolation: yes, reinforced insulation
-
Input-to-output withstand voltage: 6,000 V DC / 4,200 V AC
-
Isolation resistance: 1,000 MΩ at 500 V DC
-
Typical isolation capacitance: 20 pF
-
Isolation level: 2× MOPP under manufacturer-specified conditions
-
Patient leakage current: < 5 µA
-
Short-circuit protection: continuous, automatic recovery
-
Overload protection: 110–250% of rated power
-
Undervoltage lockout (UVLO): yes
-
UVLO start-up voltage: 8.8 V DC
-
UVLO shutdown voltage: 8 V DC
-
Recommended input fuse: 2 A slow-blow
-
Operating temperature: −40 to +90°C, subject to derating
-
Maximum case temperature: +105°C
-
Operating humidity: 20–90% RH, non-condensing
-
Storage temperature: −55 to +125°C
-
Cooling method: natural convection
-
Case material: UL94 V-0 plastic
-
Mounting: through-hole PCB mounting
-
Package: DIP24
-
Dimensions: 31.8 × 20.3 × 12.2 mm
-
Approximate weight: 17 g
-
Safety standard: IEC 60601-1
-
Manufacturer's warranty: 3 years
Target applications
-
Medical electronics and diagnostic instruments
-
Patient monitoring and medical oxygen monitors
-
CT scanning and diagnostic equipment
-
Portable medical and laboratory instruments
-
Operational and instrumentation amplifiers requiring ±12 V
-
Galvanically isolated analogue circuits
-
Precision measurement and testing systems
-
Industrial controllers and automation systems
-
Sensor and communication interfaces
-
OEM manufacturing of medical and industrial equipment
Parameters
Product parameters
| Description: | DC/DC converter unregulated |
| Case: | DIP-24 |
| Operating temperature: | -40~90 °C |
| Dimensions: | 31,8x20,3x12,2 mm |
| Output voltage DC: | -12 V |
| Output current: | 125 mA |
| Series: | MDD |
| DC input voltage: | 9~36 V |
| Power of convertor: | 3 W |
| Number of outputs: | 2 |
| Isolation: | 6000 V |
| Weight: | 17 g |
| Efficiency (typ.): | 79 % |
| Model series: | MDD03 |
| Approval agency: | CE, UKCA, EAC |
| Protection: | Over Load Protection (OLP), Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | TW |
| Small packing quantity: | 15 |
| Large packing quantity: | 750 |
| Customs nomenclature: | 85044095 |
Files for download
| MDD03.pdf |
PDF, 99.63 kB |