MDD02M-09
Stock number: C009593
Manufacturer: MEANWELL
€2.92 incl. VAT €2.42 Excl. VAT
Product description
The MEAN WELL MDD02M-09 is a compact 2 W isolated DC/DC converter with dual symmetrical ±9 V DC outputs, designed primarily for medical electronics, measuring instruments and sensitive electronic circuits. The module converts a nominal 12 V DC input into two isolated output rails, +9 V and −9 V, each providing up to 111 mA.
The converter operates over a 10.8–13.2 V DC input range and delivers 2 W total output power. With 83% typical efficiency, it provides efficient power conversion in a compact footprint. It is particularly suitable for circuits requiring symmetrical supply rails, including operational amplifiers, analogue signal processing and interface electronics.
A major advantage is its galvanic input-to-output isolation, with a withstand voltage of 6,000 V DC or 4,200 V AC. The design supports 1× MOPP / 2× MOOP under the conditions specified by the manufacturer and features patient leakage current below 2 µA. These characteristics make the module suitable for medical equipment and other applications requiring high electrical isolation.
The MDD02M-09 is an unregulated DC/DC converter, meaning its output voltage varies with input voltage and load. The nominal ±9 V DC outputs are intended to operate within the recommended 12–111 mA load range per output rail. Maximum ripple and noise are specified at 75 mVp-p.
The module is supplied in a compact SIP7 plastic package measuring 19.5 × 9.8 × 12.5 mm, designed for through-hole PCB mounting. Its approximate weight is 4.2 g. The construction uses fanless natural convection cooling.
The converter includes short-duration short-circuit protection and supports an operating temperature range of −40 to +85 °C, subject to load derating. Its compact dimensions, high isolation rating and symmetrical output make it a practical power solution for professional electronic equipment.
Key features
-
Product type: isolated DC/DC converter
-
Manufacturer: MEAN WELL
-
Series: MDD02
-
Model: MDD02M-09
-
Rated output power: 2 W
-
Nominal input voltage: 12 V DC
-
Input voltage range: 10.8–13.2 V DC
-
Number of outputs: 2, symmetrical
-
Output voltage 1: +9 V DC
-
Output voltage 2: −9 V DC
-
Maximum output current: 111 mA per rail
-
Recommended output current range: 12–111 mA per rail
-
Output regulation: unregulated
-
Typical efficiency: 83%
-
Output voltage accuracy: ±5% under specified conditions
-
Maximum ripple and noise: 75 mVp-p
-
Line regulation: 1.2% per 1% input voltage variation
-
Load regulation: ±10%
-
Switching frequency: 100 kHz
-
Input-to-output isolation: 6,000 V DC / 4,200 V AC
-
Medical isolation level: 1× MOPP / 2× MOOP, subject to manufacturer conditions
-
Isolation resistance: 100 MΩ at 500 V DC
-
Typical isolation capacitance: 5 pF
-
Patient leakage current: below 2 µA
-
Short-circuit protection: short duration, 3 seconds maximum
-
Maximum capacitive load: 470 µF per output
-
Operating temperature: −40 to +85 °C, with load derating
-
Package: SIP7
-
Mounting type: through-hole PCB mounting
-
Case material: UL94V-0 rated plastic
-
Dimensions: 19.5 × 9.8 × 12.5 mm
-
Weight: approximately 4.2 g
-
Cooling: fanless natural convection
-
Intended use: medical and professional electronics
Target applications
-
Medical electronic equipment
-
Isolated power supplies for measurement and diagnostic circuits
-
Symmetrical power supplies for operational amplifiers
-
Analogue signal processing and conditioning circuits
-
Medical patient monitoring systems
-
Isolated communication and signal interfaces
-
Industrial measurement and control instruments
-
Sensor and data acquisition modules
-
Electronic equipment requiring galvanic isolation
-
OEM development and manufacture of medical electronics
Parameters
Product parameters
| Description: | DC/DC converter unregulated |
| Case: | SIP-7 |
| Operating temperature: | -40~85 °C |
| Dimensions: | 19,5x9,8x12,5 mm |
| Output voltage DC: | -9 V |
| Output current: | 111 mA |
| Series: | MDD |
| DC input voltage: | 10,8~13,2 V |
| Power of convertor: | 2 W |
| Number of outputs: | 2 |
| Isolation: | 6000 V |
| Weight: | 4,2 g |
| Efficiency (typ.): | 83 % |
| Model series: | MDD02 |
| Approval agency: | CE, UKCA, cURus, EAC |
| Protection: | Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | TW |
| Small packing quantity: | 25 |
| Large packing quantity: | 3000 |
| Customs nomenclature: | 85044095 |
Files for download
| MDD02.pdf |
PDF, 103.44 kB |