MDD02L-12N
Stock number: C009626
Manufacturer: MEANWELL
€5.70 incl. VAT €4.71 Excl. VAT
Product description
The MEAN WELL MDD02L-12N is a compact isolated DC/DC converter with a total rated output power of 2 W, designed for direct PCB mounting. It provides dual symmetrical +12 V DC and −12 V DC outputs from a nominal 5 V DC input. Its high isolation strength, low leakage current and compact construction make it suitable for medical equipment, measurement systems, industrial electronics and sensitive analogue circuits.
The converter operates from a 4.5–5.5 V DC input range and generates a symmetrical ±12 V DC supply with a common reference point. Each output rail supports up to 84 mA, with a combined rated output power of 2 W. This symmetrical supply arrangement is particularly useful for operational amplifiers, analogue signal processing, sensors and measurement electronics.
The outputs are unregulated, meaning the actual output voltage varies with input voltage and connected load. Correct operation therefore requires appropriate loading, while sensitive applications may benefit from additional filtering or downstream voltage regulation.
A key feature of the MDD02L-12N is its 6 kV DC reinforced input-to-output isolation. The design meets 1× MOPP and 2× MOOP medical electrical safety requirements under the relevant standards. Leakage current below 2 µA supports applications requiring a high level of electrical safety and separation between power circuits.
The converter achieves 84% typical efficiency, helping reduce power losses and thermal loading. It includes short-circuit protection and supports operation across a wide −40 to +95 °C temperature range, subject to the manufacturer's thermal derating requirements.
Its compact SIP-7 package, measuring 19.7 × 7.1 × 11.5 mm, is designed for through-hole PCB mounting. The single-in-line pin arrangement simplifies integration into electronic assemblies and supports efficient use of PCB space. The module uses fanless natural convection cooling.
Combining 2 W output power, symmetrical ±12 V outputs, 5 V DC input, 6 kV DC isolation, ultra-low leakage current and medical-grade electrical safety, the MEAN WELL MDD02L-12N provides a reliable solution for isolated power distribution in analogue, measurement, industrial and medical electronic circuits.
Key features
-
Product type: isolated PCB-mount DC/DC converter
-
Manufacturer: MEAN WELL
-
Series: MDD02-N
-
Model: MDD02L-12N
-
Rated output power: 2 W total
-
Nominal input voltage: 5 V DC
-
Input voltage range: 4.5–5.5 V DC
-
Number of outputs: 2, symmetrical
-
Output voltage 1: +12 V DC
-
Output voltage 2: −12 V DC
-
Output current: up to 84 mA per rail
-
Recommended output current range: 9–84 mA per rail
-
Output regulation: unregulated
-
Galvanic isolation: yes
-
Input-to-output isolation voltage: 6 kV DC
-
Insulation type: reinforced insulation
-
Medical electrical safety: 1× MOPP / 2× MOOP
-
Leakage current: less than 2 µA
-
Typical efficiency: 84%
-
Full-load input current: 473 mA typical
-
No-load input current: 43 mA typical
-
Maximum capacitive load: 150 µF per output
-
Protection functions: short-circuit protection
-
Operating temperature: −40 to +95 °C, with load derating
-
Package type: SIP-7
-
Mounting: through-hole PCB mounting
-
Dimensions: 19.7 × 7.1 × 11.5 mm
-
Weight: approximately 2.8 g
-
Cooling: fanless natural convection
-
Safety standards: IEC 60601-1, IEC/UL 62368-1
-
Manufacturer's warranty: 3 years
Target applications
-
Medical devices and diagnostic electronics
-
Oxygen monitors and medical measurement systems
-
Medical trolley electronics and portable instruments
-
Analogue circuits requiring symmetrical ±12 V power
-
Operational amplifiers and signal converters
-
Galvanically isolated measurement and sensing circuits
-
Industrial control and monitoring systems
-
Laboratory and test electronics
-
Communications and telecommunications equipment
-
OEM development and manufacturing of electronic devices
Parameters
Product parameters
| Description: | DC/DC converter unregulated |
| Case: | SIP-7 |
| Operating temperature: | -40~95 °C |
| Dimensions: | 19,7x7,1x11,5 mm |
| Output voltage DC: | -12 V |
| Output current: | 84 mA |
| Series: | MDD |
| DC input voltage: | 4,5~5,5 V |
| Power of convertor: | 2 W |
| Number of outputs: | 2 |
| Isolation: | 6000 V |
| Weight: | 2,8 g |
| Efficiency (typ.): | 84 % |
| Model series: | MDD02-N |
| Approval agency: | CE, UKCA, cURus, CB, EAC |
| Protection: | Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | TW |
| Small packing quantity: | 24 |
| Large packing quantity: | 2160 |
| Customs nomenclature: | 85044095 |
Files for download
| MDD02-N.pdf |
PDF, 222.39 kB |