MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

MDD02L-05N

Stock number: C009624

Manufacturer: MEANWELL


€5.70 incl. VAT €4.71 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


MDD02-N-1_OK.jpg

€5.70 incl. VAT

Product description

The MEAN WELL MDD02L-05N is a compact isolated DC/DC converter from the updated MDD02-N series, designed for medical electronics, measurement instruments, analogue circuits, industrial automation and galvanically isolated power systems. From a nominal 5 V DC input, it generates two symmetrical outputs of +5 V DC and −5 V DC with a common reference point. Each output rail provides up to 200 mA, with a combined rated output power of 2 W. Its miniature SIP7 package, measuring 19.7 × 7.1 × 11.5 mm, and through-hole PCB mounting make it suitable for equipment requiring compact bipolar power rails.

A major advantage of the MDD02L-05N is its reinforced input-to-output galvanic isolation, rated at 6,000 V DC. The converter is designed for applications with enhanced medical electrical safety requirements, supporting an isolation level of 1× MOPP / 2× MOOP according to IEC 60601-1, subject to the manufacturer's specified conditions and the requirements of the finished equipment. Its exceptionally low patient leakage current below 2 µA and typical 25 pF isolation capacitance are beneficial in sensitive medical and measurement equipment. Galvanic isolation enables power domains to be separated and facilitates the design of circuits with different reference potentials. The symmetrical ±5 V supply is suitable for operational amplifiers, instrumentation amplifiers, analogue filters and signal conditioning circuits.

The MEAN WELL MDD02L-05N operates from a 4.5–5.5 V DC input, corresponding to ±10% of its nominal 5 V rating. It achieves a typical efficiency of 82% and uses switching technology operating at approximately 20 kHz. Its outputs are unregulated, meaning that the actual output voltages depend on input voltage and load conditions. The manufacturer specifies ±5% output voltage accuracy, line regulation of 1.2% per 1% input voltage variation and ±15% load regulation for the 5 V output. Maximum ripple and noise of 100 mVp-p is specified under defined measurement conditions. The recommended load range for each output is 20–200 mA, with a maximum capacitive load of 680 µF per output. A typical 37 mA no-load input current and 490 mA full-load input current support accurate sizing of the primary power supply circuit.

The updated MDD02-N series supports an extended operating temperature range of −40 to +95°C, subject to derating, and uses fanless natural convection cooling. Integrated continuous short-circuit protection contributes to reliable operation under fault conditions. The manufacturer recommends a 500 mA slow-blow input fuse. The module is housed in a non-conductive black plastic enclosure with a UL94 V-0 flammability rating and an approximate weight of 2.8 g. The manufacturer specifies compliance with IEC/UL 62368-1 and IEC 60601-1 safety requirements and provides a 3-year warranty. Combining 2 W output power, symmetrical ±5 V outputs, 6 kV DC isolation, 82% efficiency and a compact SIP7 package, the MDD02L-05N is a suitable solution for medical, measurement and industrial electronic applications.

Key features

  • Product type: isolated PCB-mount DC/DC converter

  • Manufacturer series: MDD02-N

  • Construction: encapsulated SIP7 module

  • Number of outputs: 2, symmetrical

  • Nominal input voltage: 5 V DC

  • Input voltage range: 4.5–5.5 V DC

  • Input voltage tolerance: ±10%

  • Output voltage 1: +5 V DC

  • Output voltage 2: −5 V DC

  • Symmetrical output voltage: ±5 V DC

  • Rated output current 1: 200 mA

  • Rated output current 2: 200 mA

  • Load range per output: 20–200 mA

  • Combined rated output power: 2 W

  • Output regulation: unregulated converter

  • Typical efficiency: 82%

  • Switching frequency: approximately 20 kHz

  • Output voltage accuracy: ±5%

  • Ripple and noise: 100 mVp-p maximum

  • Line regulation: 1.2% per 1% input voltage variation

  • Load regulation: ±15%

  • Maximum capacitive load: 680 µF per output

  • Typical no-load input current: 37 mA

  • Typical full-load input current: 490 mA

  • Input filter: internal capacitor

  • Galvanic isolation: yes

  • Insulation type: reinforced

  • Input-to-output withstand voltage: 6,000 V DC

  • Isolation resistance: 100 MΩ at 500 V DC

  • Typical isolation capacitance: 25 pF

  • Isolation level: 1× MOPP / 2× MOOP under manufacturer-specified conditions

  • Patient leakage current: less than 2 µA

  • Short-circuit protection: continuous

  • Recommended input fuse: 500 mA slow-blow

  • Cooling method: natural convection

  • Operating temperature: −40 to +95°C, subject to derating

  • Maximum case temperature: +105°C

  • Operating humidity: 20–90% RH, non-condensing

  • Storage temperature: −55 to +125°C

  • Temperature coefficient: 0.02%/°C from 0 to +90°C

  • Vibration resistance: 2G

  • Case material: non-conductive black plastic

  • Case flammability rating: UL94 V-0

  • Mounting type: through-hole (THT)

  • Package: SIP7

  • Number of populated pins: 5

  • Dimensions: 19.7 × 7.1 × 11.5 mm

  • Approximate weight: 2.8 g

  • Safety standards: IEC/UL 62368-1, IEC 60601-1

  • Manufacturer's warranty: 3 years

Target applications

  • Medical electronics and diagnostic instruments

  • Galvanically isolated analogue power supplies

  • Operational amplifiers requiring symmetrical ±5 V rails

  • Instrumentation amplifiers and precision measurement systems

  • Analogue filters and signal conditioning circuits

  • Medical monitoring and diagnostic equipment

  • Isolated communication and data interfaces

  • Industrial controllers and sensor modules

  • Telecommunications and data equipment

  • OEM manufacturing of medical and measurement systems


Parameters

Product parameters

Description: DC/DC converter unregulated
Case: SIP-7
Operating temperature: -40~95 °C
Dimensions: 19,7x7,1x11,5 mm
Output voltage DC: -5 V
Output current: 200 mA
Series: MDD
DC input voltage: 4,5~5,5 V
Power of convertor: 2 W
Number of outputs: 2
Isolation: 6000 V
Weight: 2,8 g
Efficiency (typ.): 82 %
Model series: MDD02-N
Approval agency: CE, UKCA, cURus, CB, EAC
Protection: Short Circuit Protection (SCP)

Packaging and legislation

Typ balení: Tube
Původ: TW
Small packing quantity: 24
Large packing quantity: 2160
Customs nomenclature: 85044095

Files for download

PDF,
222.39 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.


Alternative products