MDD01L-15
Stock number: C009579
Manufacturer: MEANWELL
€4.90 incl. VAT €4.05 Excl. VAT
Product description
The MEAN WELL MDD01L-15 is a compact isolated DC/DC converter from the MDD01 series, designed for medical electronics, precision measurement instruments, analogue circuits and equipment requiring galvanically isolated symmetrical power supplies. From a nominal 5 V DC input, it generates two symmetrical outputs of +15 V DC and −15 V DC with a common COM reference point. Each output provides a rated current of 34 mA, with a combined output power of approximately 1 W. Its compact SIP7 package and through-hole PCB mounting make it easy to integrate into electronic equipment where bipolar power rails and high isolation strength are required.
A key advantage of the MDD01L-15 is its galvanic isolation between input and output, with a withstand voltage of 6,000 V DC / 4,200 V AC. This enables the separation of power domains, helps limit the transfer of unwanted potential differences and supports the electrical safety of the finished equipment. The converter is designed for applications with enhanced medical electrical safety requirements, with the manufacturer specifying an isolation level of 1× MOPP / 2× MOOP under defined conditions. Its low typical 5 pF isolation capacitance is particularly beneficial in sensitive signal-processing and measurement circuits. The symmetrical ±15 V supply is especially suitable for operational amplifiers, analogue filters, instrumentation amplifiers and precision signal conditioning circuits requiring both positive and negative supply rails.
The MEAN WELL MDD01L-15 operates from a 4.5–5.5 V DC input, corresponding to ±10% of its nominal 5 V rating. It achieves a typical efficiency of 77% and uses switching technology operating at approximately 100 kHz. Its outputs are unregulated, meaning that the actual output voltages depend on input voltage and individual output loading. The manufacturer specifies ±5% output voltage accuracy, ±10% load regulation and maximum ripple and noise of 75 mVp-p under defined test conditions. The recommended load range for each output is 4–34 mA, with a maximum capacitive load of 220 µF per output. A typical 45 mA no-load input current and 275 mA full-load input current support accurate sizing of the primary power supply circuit.
The converter uses natural convection cooling and supports an operating temperature range of −40 to +85°C, subject to derating. Its integrated short-circuit protection is designed for temporary fault conditions lasting up to 3 seconds, and the manufacturer recommends a 500 mA slow-blow input fuse. The compact SIP7 plastic package measures 19.5 × 9.8 × 12.5 mm and has an approximate weight of 4.2 g. Electrical connections are made through through-hole PCB solder pins, with +Vout, COM and −Vout providing a convenient symmetrical supply arrangement. The manufacturer specifies UL 60601-1 safety approval for medical applications. Combining 1 W output power, dual ±15 V rails, 6 kV DC isolation, 77% efficiency and a compact SIP7 package, the MDD01L-15 is a suitable solution for sensitive analogue circuits, medical electronics and low-power galvanically isolated systems.
Key features
-
Product type: isolated PCB-mount DC/DC converter
-
Manufacturer series: MDD01
-
Construction: encapsulated SIP7 module
-
Number of outputs: 2, symmetrical
-
Nominal input voltage: 5 V DC
-
Input voltage range: 4.5–5.5 V DC
-
Input voltage tolerance: ±10%
-
Maximum transient input voltage: 9 V DC for up to 100 ms
-
Output voltage 1: +15 V DC
-
Output voltage 2: −15 V DC
-
Symmetrical output voltage: ±15 V DC
-
Rated output current 1: 34 mA
-
Rated output current 2: 34 mA
-
Load range per output: 4–34 mA
-
Combined rated output power: approximately 1 W
-
Output regulation: unregulated converter
-
Typical efficiency: 77%
-
Switching frequency: approximately 100 kHz
-
Output voltage accuracy: ±5%
-
Ripple and noise: 75 mVp-p maximum
-
Line regulation: 1.2% per 1% input voltage variation
-
Load regulation: ±10%
-
Maximum capacitive load: 220 µF per output
-
Typical no-load input current: 45 mA
-
Typical full-load input current: 275 mA
-
Input filter: internal capacitor
-
Galvanic isolation: yes
-
Input-to-output withstand voltage: 6,000 V DC / 4,200 V AC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Typical isolation capacitance: 5 pF
-
Isolation level: 1× MOPP / 2× MOOP under manufacturer-specified conditions
-
Protection functions: short-circuit protection
-
Maximum short-circuit duration: 3 seconds
-
Recommended input fuse: 500 mA slow-blow
-
Cooling method: natural convection
-
Operating temperature: −40 to +85°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Storage temperature: −55 to +125°C
-
Temperature coefficient: 0.02%/°C from 0 to +85°C
-
Vibration resistance: 2G
-
Mounting type: through-hole (THT)
-
Package: SIP7
-
Number of populated pins: 5
-
Pin configuration: 1 +Vin, 2 −Vin, 5 −Vout, 6 COM, 7 +Vout
-
Dimensions: 19.5 × 9.8 × 12.5 mm
-
Approximate weight: 4.2 g
-
Safety approval: UL 60601-1
Target applications
-
Medical electronics and diagnostic instruments
-
Galvanically isolated analogue power supplies
-
Operational amplifiers requiring symmetrical ±15 V rails
-
Instrumentation amplifiers and precision measurement systems
-
Analogue filters and signal conditioning circuits
-
Isolated communication and data interfaces
-
Sensitive sensors and sensor modules
-
Laboratory and test electronics
-
Embedded electronic systems with a 5 V DC supply
-
OEM manufacturing of medical and measurement equipment
Parameters
Product parameters
| Description: | DC/DC converter unregulated |
| Case: | SIP-7 |
| Operating temperature: | -40~85 °C |
| Dimensions: | 19,5x9,8x12,5 mm |
| Output voltage DC: | -15 V |
| Output current: | 34 mA |
| Series: | MDD |
| DC input voltage: | 4,5~5,5 V |
| Power of convertor: | 1 W |
| Number of outputs: | 2 |
| Isolation: | 6000 V |
| Weight: | 4,2 g |
| Efficiency (typ.): | 77 % |
| Model series: | MDD01 |
| Approval agency: | CE, cURus |
| Protection: | Short Circuit Protection (SCP) |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | TW |
| Small packing quantity: | 25 |
| Large packing quantity: | 3000 |
| Customs nomenclature: | 85044095 |
Files for download
| MDD01.pdf |
PDF, 84.24 kB |