MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

MDD01L-05

Stock number: C009576

Manufacturer: MEANWELL


€5.90 incl. VAT €4.87 Excl. VAT


Add to cart

In our warehouse 0 pcs External warehouse more than 10 pcs

Delivery from €6.50


MDD01-2_OK.jpg

€5.90 incl. VAT

Product description

The MEAN WELL MDD01L-05 is a miniature isolated DC/DC converter from the MDD01 series, primarily designed for medical electronics, measurement instruments, analogue circuits and equipment requiring galvanically isolated dual-rail power. From a nominal 5 V DC input, it generates two symmetrical outputs of +5 V DC and −5 V DC with a common reference point. Each output provides up to 100 mA, with a combined rated output power of 1 W. Its compact SIP7 package and through-hole PCB mounting make it suitable for integration into electronic equipment where space efficiency, high isolation strength and straightforward generation of bipolar supply rails are important.

A key advantage of the MDD01L-05 is its galvanic isolation between input and output, with a withstand voltage of 6,000 V DC / 4,200 V AC. This enables separation of power domains and helps limit the transfer of unwanted potential differences between sections of an electronic system. The converter is designed for applications involving medical electrical safety requirements, with the manufacturer specifying an isolation level of 1× MOPP / 2× MOOP under defined system conditions. Its typical 5 pF isolation capacitance is particularly useful in sensitive measurement and signal-processing circuits. The compact module is therefore well suited to isolated analogue interfaces, operational amplifier supplies, signal conditioning circuits and medical measurement systems.

The MEAN WELL MDD01L-05 operates from a 4.5–5.5 V DC input, corresponding to approximately ±10% of its nominal 5 V rating. It achieves a typical efficiency of 79% and operates at a switching frequency of approximately 100 kHz. Its outputs are unregulated, meaning that the actual output voltage varies with input voltage and load conditions. The manufacturer specifies ±5% output voltage accuracy, ±10% load regulation and maximum ripple and noise of 75 mVp-p under defined test conditions. The recommended operating current for each rail is 10–100 mA, with a maximum capacitive load of 470 µF per output. Proper operation requires the minimum load, combined output power and manufacturer's design conditions to be observed.

The converter uses natural convection cooling and supports an operating temperature range of −40 to +85°C, subject to derating. Its integrated short-circuit protection is intended for temporary fault conditions of up to 3 seconds, and the manufacturer recommends a 500 mA slow-blow input fuse. The module is supplied in a compact SIP7 plastic package measuring 19.5 × 9.8 × 12.5 mm, with an approximate weight of 4.2 g. Electrical connections are made through PCB solder pins, with +Vout, COM and −Vout providing a convenient symmetrical supply arrangement. The manufacturer specifies UL 60601-1 approval and relevant requirements for medical applications. Combining 1 W output power, dual ±5 V rails, 6 kV DC isolation, 79% efficiency and a compact SIP7 package, the MDD01L-05 is a suitable power module for sensitive electronics and low-power galvanically isolated circuits.

Key features

  • Product type: isolated PCB-mount DC/DC converter

  • Manufacturer series: MDD01

  • Construction: encapsulated SIP7 module

  • Number of outputs: 2, symmetrical

  • Nominal input voltage: 5 V DC

  • Input voltage range: 4.5–5.5 V DC

  • Input voltage tolerance: ±10%

  • Maximum transient input voltage: 9 V DC for up to 100 ms

  • Output voltage 1: +5 V DC

  • Output voltage 2: −5 V DC

  • Symmetrical output voltage: ±5 V DC

  • Rated output current 1: 100 mA

  • Rated output current 2: 100 mA

  • Load range per output: 10–100 mA

  • Combined rated output power: 1 W

  • Output regulation: unregulated converter

  • Typical efficiency: 79%

  • Switching frequency: 100 kHz

  • Output voltage accuracy: ±5%

  • Ripple and noise: 75 mVp-p maximum

  • Line regulation: 1.2% per 1% input voltage variation

  • Load regulation: ±10%

  • Maximum capacitive load: 470 µF per output

  • Typical no-load input current: 25 mA

  • Typical full-load input current: 260 mA

  • Input filter: internal capacitor

  • Galvanic isolation: yes

  • Input-to-output withstand voltage: 6,000 V DC / 4,200 V AC

  • Isolation resistance: 100 MΩ at 500 V DC

  • Typical isolation capacitance: 5 pF

  • Isolation level: 1× MOPP / 2× MOOP under manufacturer-specified conditions

  • Protection functions: short-circuit protection

  • Maximum short-circuit duration: 3 seconds

  • Recommended input fuse: 500 mA slow-blow

  • Cooling method: natural convection

  • Operating temperature: −40 to +85°C, subject to derating

  • Operating humidity: 20–90% RH, non-condensing

  • Storage temperature: −55 to +125°C

  • Temperature coefficient: 0.02%/°C from 0 to +85°C

  • Vibration resistance: 2G

  • Mounting type: through-hole (THT)

  • Package: SIP7

  • Number of populated pins: 5

  • Pin configuration: 1 +Vin, 2 −Vin, 5 −Vout, 6 COM, 7 +Vout

  • Dimensions: 19.5 × 9.8 × 12.5 mm

  • Approximate weight: 4.2 g

  • Safety approval: UL 60601-1

Target applications

  • Medical electronics and diagnostic instruments

  • Galvanically isolated analogue power supplies

  • Operational amplifiers requiring symmetrical ±5 V rails

  • Precision measurement and instrumentation systems

  • Signal conditioning circuits and converters

  • Isolated communication and data interfaces

  • Sensitive sensors and sensor modules

  • Laboratory and test electronics

  • Embedded electronic systems with a 5 V DC supply

  • OEM manufacturing of medical and measurement equipment


Parameters

Product parameters

Description: DC/DC converter unregulated
Case: SIP-7
Operating temperature: -40~85 °C
Dimensions: 19,5x9,8x12,5 mm
Output voltage DC: -5 V
Output current: ±100 mA
Series: MDD
DC input voltage: 4,5~5,5 V
Power of convertor: 1 W
Number of outputs: 2
Isolation: 6000 V
Weight: 4,2 g
Efficiency (typ.): 79 %
Model series: MDD01
Approval agency: CE, cURus
Protection: Short Circuit Protection (SCP)

Packaging and legislation

Typ balení: Tube
Původ: TW
Small packing quantity: 25
Large packing quantity: 3000
Customs nomenclature: 85044095

Files for download

PDF,
84.24 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.


Alternative products