LRS-350N2-36
Stock number: C001478
Manufacturer: MEANWELL
To order
To place an order, fill in the inquiry form and our sales team will contact you.
Estimated delivery 17–18 weeks
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL LRS-350N2-36 is a high-performance industrial AC/DC switching power supply providing a regulated 36V DC output, 9.7A rated current and 349.2W continuous output power. It is designed for industrial automation, electric motor drives, control systems and professional electronic equipment requiring stable power and high short-term current capability. Its High Peak Power design supports up to 200% of rated output power, approximately 698.4W for a maximum of 5 seconds, subject to the manufacturer's specified operating conditions.
The power supply features a selectable 115/230V AC input with operating ranges of 90–132V AC and 180–264V AC. With the selector set to 230V, it also supports 240–370V DC input. Its 88.5% typical efficiency helps minimise energy losses and heat generation. The output voltage can be adjusted from 32.4 to 39.6V DC, allowing it to meet specific equipment requirements. Maximum ripple and noise are 200mVp-p.
A key advantage of the LRS-350N2-36 is its ability to supply inductive and capacitive loads with high start-up currents. Its short-term peak power capability is particularly useful for electric motors, solenoids, electromagnetic valves and other electromechanical equipment. For repeated peak loads, the maximum peak duration of 5 seconds, permissible duty cycle and requirement for average output power not to exceed 349.2W must be observed.
The power supply is housed in a low-profile metal enclosure measuring just 30mm in height and incorporates a built-in DC cooling fan with automatic temperature-based control. The fan switches on when the internal temperature sensor reaches approximately 50°C and switches off when it falls to approximately 40°C. The unit supports an operating temperature range of −25 to +70°C, subject to the manufacturer's derating curve, and offers 5G vibration resistance.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. Electrical safety is supported by 3.75kV AC input-to-output isolation and a design complying with relevant safety requirements, including IEC/UL 62368-1 and EN 61558-1 / EN 61558-2-16. The power supply also features an LED power indicator and no-load consumption below 0.75W.
With compact 215 × 115 × 30mm dimensions, an approximate 760g weight, high peak-load capability and a three-year manufacturer's warranty, the MEAN WELL LRS-350N2-36 is a practical solution for industrial machinery, automation equipment and professional electronic systems requiring 36V DC power.
Key features
-
Device type: industrial AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: LRS-350N2
-
Model: LRS-350N2-36
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 36V DC
-
Rated output current: 9.7A
-
Rated continuous output power: 349.2W
-
Short-term peak output power: up to 698.4W
-
Maximum peak duration: 5 seconds
-
Maximum peak power capability: 200% of rated output power
-
Peak duty cycle: up to 35%, depending on load and input voltage
-
Number of outputs: 1
-
Output voltage adjustment: 32.4–39.6V DC
-
AC input voltage range: 90–132V AC / 180–264V AC
-
Input voltage selection: mechanical 115/230V AC selector
-
DC input voltage range: 240–370V DC with selector set to 230V
-
Input frequency: 47–63Hz
-
Typical efficiency: 88.5%
-
Ripple and noise: 200mVp-p maximum
-
Output voltage tolerance: ±1%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Typical AC input current: 6.8A at 115V AC / 3.8A at 230V AC
-
Typical inrush current: 60A at 115V AC and 230V AC
-
Typical set-up time: 1,300ms
-
Typical output rise time: 50ms
-
Typical hold-up time: 16ms at 230V AC / 12ms at 115V AC
-
No-load power consumption: below 0.75W
-
Power-on indication: LED
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection: output shutdown when power exceeds 105% for longer than 5 seconds
-
Protection above 200% load: hiccup mode with automatic recovery
-
Overvoltage protection threshold: 41.4–46.8V
-
Overtemperature protection: output shutdown, recovery after power restart
-
Input-to-output withstand voltage: 3.75kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 0.5kV AC
-
Safety standards: IEC/UL 62368-1, EN 61558-1, EN 61558-2-16
-
Overvoltage category: OVC III, subject to manufacturer's conditions
-
Construction: low-profile metal enclosure
-
Cooling: built-in DC fan
-
Fan control: automatic temperature-based operation
-
Fan switch-on temperature: approximately 50°C at the internal sensor
-
Fan switch-off temperature: approximately 40°C at the internal sensor
-
Operating temperature: −25 to +70°C, subject to derating
-
Storage temperature: −40 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Maximum operating altitude: 2,000m
-
Vibration resistance: 5G
-
Mounting: chassis or equipment mounting
-
Connection: screw terminals
-
Dimensions: 215 × 115 × 30mm
-
Weight: approximately 760g
-
Manufacturer's warranty: 3 years
Target applications
-
Industrial automation systems and production lines
-
Industrial control systems and control cabinets
-
Electric motors and drives with high start-up currents
-
Solenoids, electromagnetic valves and actuators
-
CNC machines and electromechanical equipment
-
Robotic systems and automated manipulators
-
Industrial measurement and testing instruments
-
Equipment with inductive and capacitive loads
-
Professional electronic equipment requiring 36V DC
-
OEM industrial machinery and electronic assemblies
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -25~70 °C |
| Dimensions: | 215x115x30 mm |
| Output voltage DC: | 36 V |
| Output current: | 9,7 A |
| Series: | LRS |
| AC input voltage: | 90~132 V, 180~264 V |
| DC input voltage: | 240~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 349 W |
| Number of outputs: | 1 |
| Isolation: | 3750 V |
| Weight: | 760 g |
| Efficiency (typ.): | 88,5 % |
| Model series: | LRS-350N2 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 15 |
| Customs nomenclature: | 85044095 |
Files for download
| LRS-350N2-spec.pdf |
PDF, 669.57 kB |