LPFH-60D-54
Stock number: C003023
Manufacturer: MEANWELL
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
Detailed product description
The MEAN WELL LPFH-60D-54 is a professional dimmable AC/DC LED driver with a rated output voltage of 54V DC, an output current of 1.12A and 60.48W rated power. It is designed primarily for LED luminaires, LED panels and lighting modules requiring a regulated constant-current supply. Within its 32.4–54V DC constant-current operating region, the driver automatically adjusts its output voltage to suit the connected LED load while maintaining the specified 1.12A output current.
A major advantage of the LPFH-60D series is its high-voltage input range of 200–400V AC / 282–565V DC, making it suitable for lighting systems operating at elevated supply voltages. Typical applications include industrial and commercial installations using 230V, 277V or 347V AC supplies. Integrated active power factor correction (PFC) supports efficient energy utilisation and helps limit harmonic current distortion. Its 90% typical efficiency helps minimise power losses and heat generation.
The LPFH-60D-54 incorporates a 3-in-1 dimming function, allowing brightness control through a 1–10V DC control signal, a 10V PWM signal or resistance-based dimming. The dimming interface uses separate DIM+ and DIM− leads and enables output current adjustment over approximately 10–100% of the rated value. These control options make the driver suitable for smart lighting systems, building automation and professional installations requiring adjustable brightness.
The unit is housed in a fully encapsulated plastic enclosure rated IP67, providing protection against dust and water ingress. It is suitable for indoor and outdoor LED lighting, including installations in damp or dusty environments, subject to the manufacturer's installation requirements. Its Class II insulation design allows operation without a protective earth connection. Natural convection cooling enables silent, fanless operation. The driver also carries a Type HL classification for selected Class I, Division 2 hazardous locations, subject to the relevant approvals and installation conditions.
Integrated protection functions include short-circuit, overvoltage and overtemperature protection. Short-circuit protection operates in hiccup mode with automatic recovery after the fault is removed. Overvoltage and thermal protection shut down the output, with recovery depending on the specific fault condition and manufacturer's requirements. The driver supports a case operating temperature range of −40 to +90°C, with permissible loading dependent on the manufacturer's thermal derating characteristics.
With compact 162.5 × 43 × 32mm dimensions, an approximate 450g weight, IP67 protection, high-voltage input capability, versatile dimming options and a five-year manufacturer's warranty, the MEAN WELL LPFH-60D-54 is a practical solution for professional LED lighting requiring a regulated 1.12A output current, a higher LED operating voltage and reliable operation at elevated input voltages.
Key features
-
Device type: dimmable AC/DC LED driver
-
Manufacturer: MEAN WELL
-
Product series: LPFH-60D
-
Model: LPFH-60D-54
-
Output characteristic: constant current (CC)
-
Rated output voltage: 54V DC
-
Rated output current: 1.12A
-
Rated output power: 60.48W
-
Constant-current operating region: 32.4–54V DC
-
Number of outputs: 1
-
Output current tolerance: ±5%
-
Output current ripple: 5% maximum at rated current
-
Dimming function: 3-in-1
-
Control voltage dimming: 1–10V DC
-
PWM dimming: 10V PWM, 100Hz to 3kHz
-
Resistance-based dimming: 10–100kΩ for one driver
-
Dimming range: approximately 10–100%
-
Dimming leads: DIM+ / DIM−
-
AC input voltage range: 200–400V AC
-
DC input voltage range: 282–565V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 90%
-
Power factor correction: active PFC
-
Power factor at full load: ≥0.95 at 230/277V AC; ≥0.92 at 347V AC
-
Total harmonic distortion (THD): below 20% at ≥60% load (230/277V AC) or ≥75% load (347V AC)
-
Typical AC input current: 0.4A at 230/277V AC; 0.32A at 347V AC
-
Typical inrush current: 40A at 347V AC
-
Typical set-up time: 700ms at 230/277V AC; 500ms at 347V AC
-
Leakage current: below 0.75mA at 347V AC
-
Protection functions: short circuit, overvoltage and overtemperature
-
Short-circuit protection: hiccup mode with automatic recovery
-
Overvoltage protection threshold: 59–66V
-
Overtemperature protection: output shutdown
-
Input-to-output withstand voltage: 3kV AC
-
Input-to-output insulation resistance: at least 100MΩ at 500V DC
-
Protection class: Class II
-
Ingress protection rating: IP67
-
Enclosure material: fully encapsulated plastic
-
Cooling: natural convection
-
Built-in fan: no
-
Case operating temperature: −40 to +90°C, subject to derating
-
Maximum case temperature: +90°C
-
Storage temperature: −40 to +90°C
-
Operating humidity: 20–95% RH, non-condensing
-
Vibration resistance: 5G
-
Safety approvals: UL 8750, CSA C22.2 No. 250.0-08
-
HL classification: Class I, Division 2, subject to approval
-
EMC: FCC Part 15 Subpart B and applicable IEC 61000-4 immunity tests
-
Input connection: cable leads
-
Output connection: cable leads
-
Mounting: surface or luminaire mounting
-
Dimensions: 162.5 × 43 × 32mm
-
Weight: approximately 450g
-
Manufacturer's warranty: 5 years
Target applications
-
Professional constant-current 1.12A LED luminaires
-
High-voltage input LED lighting systems
-
Industrial and commercial LED lighting
-
Dimmable LED panels and ceiling lights
-
LED floodlights and high-output luminaires
-
Indoor and outdoor LED lighting
-
Smart building lighting and lighting automation
-
Architectural and decorative LED lighting
-
Lighting in selected industrial hazardous locations requiring Type HL classification
-
OEM luminaires and custom LED lighting systems
Parameters
Product parameters
| Description: | AC/DC power supply for LED |
| Operating temperature: | -40~90 °C |
| Dimensions: | 162,5x43x32 mm |
| Output voltage DC: | 32,4~54 V |
| Output current: | 1,12 A |
| Series: | LPFH |
| AC input voltage: | 200~400 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 60 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 450 g |
| Efficiency (typ.): | 90 % |
| IP code: | IP67 |
| Model series: | LPFH-60D |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 32 |
| Customs nomenclature: | 85044095 |
Files for download
| LPFH-60D-spec.pdf |
PDF, 139.72 kB |