LPF-90D-15
Stock number: C003024
Manufacturer: MEANWELL
€41.12 incl. VAT €33.98 Excl. VAT
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
Detailed product description
The MEAN WELL LPF-90D-15 is a professional dimmable AC/DC LED driver with a rated output voltage of 15V DC, an output current of 5A and 75W rated power. It belongs to the LPF-90D series, which includes variants rated at approximately 90W. The LPF-90D-15 model is specifically designed for LED luminaires and lighting modules requiring a regulated 5A constant-current supply. Within its 9–15V DC constant-current operating region, the driver automatically adjusts its output voltage to match the connected LED load.
A key advantage of the LPF-90D-15 is its integrated 3-in-1 dimming function, providing brightness control through a 1–10V DC control signal, a PWM signal or resistance-based dimming. The interface uses separate DIM+ and DIM− leads, simplifying integration into building automation and professional lighting control systems. Dimming is achieved by regulating the output current, allowing LED brightness to be adjusted to suit operating requirements.
The driver accepts a wide input voltage range of 90–305V AC / 127–431V DC and incorporates active power factor correction (PFC). Its 89% typical efficiency helps minimise energy losses and heat generation. At full load, the power factor reaches at least 0.96 at 230V AC. The design also addresses relevant electromagnetic compatibility and harmonic current requirements for professional lighting applications.
The unit is housed in a fully encapsulated plastic enclosure rated IP67, providing effective protection against dust and water ingress. It is suitable for indoor and outdoor LED lighting, including installations in damp or dusty environments, subject to the manufacturer's installation requirements. Its Class II insulation design allows operation without a protective earth connection. Natural convection cooling enables silent, fanless operation.
Integrated protection functions include overcurrent, overvoltage and overtemperature protection. During an overcurrent condition, the driver limits the output current and automatically returns to normal operation once the fault is removed. Overvoltage and thermal protection shut down the output, with an input power restart required for recovery. The driver supports a case operating temperature range of −40 to +70°C, subject to the manufacturer's thermal derating characteristics.
With 161 × 61 × 36mm dimensions, an approximate 700g weight, IP67 protection, versatile dimming options and a five-year manufacturer's warranty, the MEAN WELL LPF-90D-15 is a practical solution for professional LED lighting requiring a regulated 5A output current, 75W rated power and flexible brightness control.
Key features
-
Device type: dimmable AC/DC LED driver
-
Manufacturer: MEAN WELL
-
Product series: LPF-90D
-
Model: LPF-90D-15
-
Output characteristic: constant current (CC), with maximum output voltage limitation
-
Rated output voltage: 15V DC
-
Rated output current: 5A
-
Rated output power: 75W
-
Constant-current operating region: 9–15V DC
-
Number of outputs: 1
-
Output current tolerance: ±5%
-
Output current ripple: 5% maximum at rated current
-
Dimming function: 3-in-1
-
Control voltage dimming: 1–10V DC
-
PWM dimming: supported
-
Resistance-based dimming: supported
-
Dimming leads: DIM+ / DIM−
-
AC input voltage range: 90–305V AC
-
DC input voltage range: 127–431V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 89%
-
Power factor correction: active PFC
-
Power factor at full load: ≥0.97 at 115V AC / ≥0.96 at 230V AC / ≥0.95 at 277V AC
-
Total harmonic distortion (THD): below 20% at ≥60% load (115/230V AC) or ≥75% load (277V AC)
-
Typical AC input current: 0.95A at 115V AC / 0.5A at 230V AC / 0.4A at 277V AC
-
Typical inrush current: 70A at 230V AC, cold start
-
Recommended number of drivers on a 16A circuit breaker at 230V AC: 4 units (type B) / 6 units (type C)
-
Typical set-up time: 1,200ms at 115V AC / 500ms at 230V AC
-
Typical output rise time: 200ms
-
Typical hold-up time: 16ms
-
Leakage current: below 0.75mA at 240V AC
-
Protection functions: overcurrent, overvoltage and overtemperature
-
Overcurrent protection threshold: 95–108% of rated current
-
Overcurrent protection mode: constant-current limiting with automatic recovery
-
Overvoltage protection threshold: 18–21V
-
Overvoltage recovery: input power restart required
-
Overtemperature protection: output shutdown, recovery after input power restart
-
Input-to-output withstand voltage: 3.75kV AC
-
Input-to-output insulation resistance: at least 100MΩ at 500V DC
-
Protection class: Class II
-
Ingress protection rating: IP67
-
Enclosure material: fully encapsulated plastic
-
Cooling: natural convection
-
Built-in fan: no
-
Case operating temperature: −40 to +70°C, subject to derating
-
Maximum case temperature: +70°C
-
Storage temperature: −40 to +80°C
-
Operating humidity: 20–95% RH, non-condensing
-
Vibration resistance: 5G
-
Safety approvals: UL 8750, CSA C22.2 No. 250.13-12, EN 61347-1, EN 61347-2-13
-
EMC standards: EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61547
-
Surge immunity: 2kV line-to-line
-
Input connection: cable leads
-
Output connection: cable leads
-
Mounting: surface or luminaire mounting
-
Dimensions: 161 × 61 × 36mm
-
Weight: approximately 700g
-
Manufacturer's warranty: 5 years
Target applications
-
Professional constant-current 5A LED luminaires
-
Dimmable LED panels and lighting modules
-
Indoor and outdoor LED lighting
-
Architectural and decorative LED lighting
-
Commercial and industrial lighting systems
-
Smart building lighting and lighting automation
-
High-output LED floodlights with a compatible operating voltage
-
Retail and office lighting installations
-
Illuminated advertising and information displays
-
OEM luminaires and custom LED lighting systems
Parameters
Product parameters
| Description: | AC/DC power supply for LED |
| Operating temperature: | -40~70 °C |
| Dimensions: | 161x61x36 mm |
| Output voltage DC: | 9~15 V |
| Output current: | 5 A |
| Series: | LPF |
| AC input voltage: | 90~305 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 75 W |
| Number of outputs: | 1 |
| Isolation: | 3750 V |
| Weight: | 700 g |
| Efficiency (typ.): | 89 % |
| IP code: | IP67 |
| Model series: | LPF-90D |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 20 |
| Customs nomenclature: | 85044095 |
Files for download
| LPF-90D-spec.pdf |
PDF, 572.98 kB |