MINYX – Distributor of Electronic Components

Cart

Do you have a question? We’re here for you by phone +420 511 199 104, Mo—Fri, 8:00—16:00

Language

Currency

LPF-60D-42

Stock number: C003018

Manufacturer: MEANWELL


€29.23 incl. VAT €24.16 Excl. VAT


To order

To place an order, fill in the inquiry form and our sales team will contact you.

In our warehouse 0 pcs External warehouse 0 pcs

We will confirm the exact delivery date in our offer.


Product description

Detailed product description

The MEAN WELL LPF-60D-42 is a professional dimmable AC/DC LED driver with a rated output voltage of 42V DC, an output current of 1.43A and 60.06W rated power. It is designed primarily for LED luminaires, LED panels and lighting modules requiring accurately regulated output current. The driver provides a constant-current (CC) output characteristic over a 25.2–42V DC operating range, automatically adjusting its output voltage to suit the connected LED load while maintaining the rated 1.43A output current.

A key advantage of the LPF-60D-42 is its integrated 3-in-1 dimming function, providing brightness control through a 1–10V DC control signal, a 10V PWM signal or resistance-based dimming. The dimming interface uses separate DIM+ and DIM− leads and allows output current adjustment over approximately 10–100% of the rated value. These control options make the driver suitable for smart building lighting, lighting automation and professional installations requiring adjustable brightness.

The driver accepts a wide input voltage range of 90–305V AC / 127–431V DC and incorporates active power factor correction (PFC). Its 90% typical efficiency helps minimise energy losses and heat generation. At full load, the power factor reaches at least 0.95 at 230V AC, supporting efficient power utilisation and compliance with relevant lighting requirements.

The unit is housed in a fully encapsulated plastic enclosure rated IP67, providing effective protection against dust and water ingress. It is suitable for indoor and outdoor LED lighting, including installations in damp or dusty environments, subject to the manufacturer's installation requirements. Its Class II insulation design allows installation without a protective earth connection. Natural convection cooling enables silent, fanless operation without moving mechanical components.

Integrated protection functions include short-circuit, overcurrent, overvoltage and overtemperature protection. Short-circuit protection operates in hiccup mode with automatic recovery after the fault is removed, while overcurrent protection uses constant-current limiting. The driver supports a case operating temperature range of −40 to +80°C, with permissible loading dependent on ambient temperature and installation conditions.

With compact 162.5 × 43 × 32mm dimensions, an approximate 450g weight, IP67 protection, versatile dimming options and a five-year manufacturer's warranty, the MEAN WELL LPF-60D-42 is a practical solution for professional LED lighting requiring a regulated 1.43A output current and flexible brightness control.

Key features

  • Device type: dimmable AC/DC LED driver

  • Manufacturer: MEAN WELL

  • Product series: LPF-60D

  • Model: LPF-60D-42

  • Output characteristic: constant current (CC)

  • Rated output voltage: 42V DC

  • Rated output current: 1.43A

  • Rated output power: 60.06W

  • Constant-current operating region: 25.2–42V DC

  • Number of outputs: 1

  • Output current tolerance: ±5%

  • Output current ripple: 5% maximum at rated current

  • Dimming function: 3-in-1

  • Control voltage dimming: 1–10V DC

  • PWM dimming: 10V PWM, 100Hz to 3kHz

  • Resistance-based dimming: 10–100kΩ for one driver

  • Dimming range: approximately 10–100%

  • Dimming leads: DIM+ / DIM−

  • AC input voltage range: 90–305V AC

  • DC input voltage range: 127–431V DC

  • Input frequency: 47–63Hz

  • Typical efficiency: 90%

  • Power factor correction: active PFC

  • Power factor at full load: ≥0.97 at 115V AC / ≥0.95 at 230V AC / ≥0.92 at 277V AC

  • Total harmonic distortion (THD): below 20% under the manufacturer's specified conditions

  • Typical AC input current: 0.8A at 115V AC / 0.4A at 230V AC / 0.32A at 277V AC

  • Typical inrush current: 55A at 230V AC

  • Typical set-up time: 1,000ms at 115V AC / 500ms at 230V AC

  • Typical output rise time: 80ms

  • Typical hold-up time: 16ms

  • Leakage current: below 0.75mA at 240V AC

  • Protection functions: short circuit, overcurrent, overvoltage and overtemperature

  • Overcurrent protection threshold: 95–108% of rated current

  • Overcurrent protection mode: constant-current limiting with automatic recovery

  • Short-circuit protection: hiccup mode with automatic recovery

  • Overvoltage protection threshold: 46–54V

  • Overvoltage recovery: input power restart required

  • Overtemperature protection: output shutdown, recovery after input power restart

  • Input-to-output withstand voltage: 3.75kV AC

  • Input-to-output insulation resistance: at least 100MΩ at 500V DC

  • Protection class: Class II

  • Ingress protection rating: IP67

  • Enclosure material: fully encapsulated plastic

  • Cooling: natural convection

  • Built-in fan: no

  • Case operating temperature: −40 to +80°C, subject to derating

  • Maximum case temperature: +80°C

  • Storage temperature: −40 to +80°C

  • Operating humidity: 20–95% RH, non-condensing

  • Vibration resistance: 5G

  • Safety standards: EN 61347-1, EN 61347-2-13, UL 8750

  • EMC standards: EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3

  • Surge immunity: 2kV line-to-line

  • Input connection: cable leads

  • Output connection: cable leads

  • Mounting: surface or luminaire mounting

  • Dimensions: 162.5 × 43 × 32mm

  • Weight: approximately 450g

  • Manufacturer's warranty: 5 years

Target applications

  • Professional constant-current 1.43A LED luminaires

  • Dimmable LED panels and ceiling lights

  • Indoor and outdoor LED lighting

  • Architectural and decorative LED lighting

  • Commercial and industrial lighting systems

  • Smart building lighting and lighting automation

  • LED downlights and spotlights

  • Technical and utility area lighting

  • Illuminated advertising and information displays

  • OEM luminaires and custom LED lighting systems


Parameters

Product parameters

Description: AC/DC power supply for LED
Operating temperature: -40~80 °C
Dimensions: 162,5x43x32 mm
Output voltage DC: 25,2~42 V
Output current: 1,43 A
Series: LPF
AC input voltage: 90~305 V
Input frequency: 47~63 Hz
Power of convertor: 60 W
Number of outputs: 1
Isolation: 3750 V
Weight: 450 g
Efficiency (typ.): 90 %
IP code: IP67
Model series: LPF-60D

Packaging and legislation

Typ balení: Box
Původ: CN
Small packing quantity: 32
Customs nomenclature: 85044095

Files for download

PDF,
555.1 kB

Customer questions and answers

Invalid phone

By clicking you agree to the processing of personal data.