HRP-150N3-24
Stock number: C004058
Manufacturer: MEANWELL
€56.97 incl. VAT €47.08 Excl. VAT
Product description
Detailed product description
The MEAN WELL HRP-150N3-24 is a professional industrial enclosed AC/DC switching power supply providing a regulated 24V DC output, a rated current of 6.5A and 156W continuous output power. It belongs to the HRP-150N3 series, specifically designed for applications requiring high short-duration power. With its ability to deliver up to 300% of rated output power, it is particularly suitable for DC motors, electromagnetic devices, industrial drives and other loads with high starting currents.
The main advantage of the HRP-150N3-24 is its short-term peak output capability of up to 468W, allowing the supply to handle substantial inrush and start-up loads. At a nominal 24V DC, this corresponds to approximately 19.5A peak output current, subject to the specified operating conditions. Peak operation is limited to five seconds, while the permissible duty cycle depends on peak power, input voltage and average load. Average output power must remain at or below 156W, allowing the supply to be sized efficiently for equipment with intermittent high-power demands.
The power supply accepts a universal input voltage range of 85–264V AC / 120–370V DC and incorporates active power factor correction (PFC). At full load, the power factor exceeds 0.95 at 230V AC and 0.98 at 115V AC. Its 88% typical efficiency helps reduce power losses and heat generation. The design can also withstand a temporary 300V AC input surge for five seconds.
The output voltage can be adjusted using the integrated potentiometer over a range of 21.6–28.8V DC, allowing the supply to be configured for specific equipment requirements. It provides ±1.5% output voltage tolerance, 150mVp-p maximum ripple and noise and ±0.5% load regulation. The integrated Remote Sense function compensates for voltage drops along the output cables by up to 0.5V, helping maintain accurate voltage directly at the connected equipment.
The HRP-150N3-24 is housed in a compact low-profile 1U metal enclosure and uses natural convection cooling. Its fanless construction supports quiet operation and reduces maintenance requirements. The supply operates over an ambient temperature range of −40 to +70°C, with permissible loading dependent on temperature, input voltage and installation conditions. It is designed for integration into industrial equipment and supports operating altitudes of up to 5,000 metres, subject to the specified temperature derating.
Integrated protection functions include short-circuit, overload, overvoltage and overtemperature protection. The overload protection system accommodates short-duration power peaks and shuts down the output if the permitted power or time limits are exceeded. Overvoltage protection operates at 30–34.8V and requires an input power restart for recovery. Thermal protection automatically restores operation once the temperature has returned to a safe level.
With 159 × 97 × 38mm dimensions, an approximate 540g weight, Remote Sense, high peak-load capability and a five-year manufacturer's warranty, the MEAN WELL HRP-150N3-24 is a practical choice for professional 24V power systems, particularly where high starting currents must be accommodated within a compact power supply.
Key features
-
Device type: industrial enclosed AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: HRP-150N3
-
Model: HRP-150N3-24
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 24V DC
-
Rated output current: 6.5A
-
Rated continuous output power: 156W
-
Maximum short-duration peak output power: up to 468W (300%)
-
Approximate peak current at 24V: up to 19.5A
-
Maximum peak-load duration: 5 seconds
-
Maximum average output power: 156W
-
Peak-load duty cycle: dependent on power and input voltage, maximum 35%
-
Continuous output current range: 0–6.5A
-
Adjustable output voltage: 21.6–28.8V DC
-
Number of outputs: 1
-
Output voltage tolerance: ±1.5%
-
Ripple and noise: 150mVp-p maximum
-
Line regulation: ±0.2%
-
Load regulation: ±0.5%
-
AC input voltage range: 85–264V AC
-
DC input voltage range: 120–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 88%
-
Power factor correction: active PFC
-
Power factor at full load: above 0.95 at 230V AC / above 0.98 at 115V AC
-
Typical AC input current: 1.7A at 115V AC / 0.9A at 230V AC
-
Typical inrush current: 35A at 115V AC / 70A at 230V AC
-
Temporary input surge withstand: 300V AC for five seconds
-
Typical set-up time: 3,000ms
-
Typical rise time: 50ms
-
Typical hold-up time: 16ms at 115/230V AC
-
Leakage current: below 1mA at 240V AC
-
Remote voltage sensing: Remote Sense
-
Maximum voltage drop compensation: 0.5V
-
Sense connections: +S / −S
-
Protection functions: short circuit, overload, overvoltage and overtemperature
-
Overload protection: time-dependent protection allowing short-duration peak loads
-
Overvoltage protection threshold: 30–34.8V
-
Overvoltage recovery: input power restart required
-
Overtemperature protection: output shutdown with automatic recovery after cooling
-
Input-to-output withstand voltage: 3kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 0.5kV AC
-
Insulation resistance: at least 100MΩ at 500V DC
-
Cooling: natural convection
-
Built-in fan: no
-
Ambient operating temperature: −40 to +70°C, subject to derating
-
Storage temperature: −50 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Maximum operating altitude: 5,000 metres
-
Vibration resistance: 5G
-
Safety standards: UL 62368-1, EN 62368-1, IEC 62368-1
-
EMC standards: EN 55032 Class B, EN 61000-3-2 Class A, EN 61000-3-3, EN 55035, EN 61000-6-2
-
Input connection: screw terminal block
-
Output connection: screw terminal block
-
Remote Sense connection: separate connector
-
Mounting: built-in, screw mounting
-
Enclosure: low-profile 1U metal housing
-
Dimensions: 159 × 97 × 38mm
-
Weight: approximately 540g
-
MTBF: at least 222,800 hours according to MIL-HDBK-217F at 25°C
-
Manufacturer's warranty: 5 years
Target applications
-
Industrial automation systems and controllers
-
24V DC motors with high starting currents
-
Solenoid valves, electromagnetic actuators and control devices
-
Industrial drives and electromechanical equipment
-
Automated production and assembly lines
-
Robotics and material-handling systems
-
Measurement and test equipment
-
Telecommunications and networking equipment requiring 24V DC
-
Embedded electronic systems and OEM equipment
-
Industrial control cabinets and power distribution modules
-
Equipment with short-duration high-power start-up demands
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~70 °C |
| Dimensions: | 159x97x38 mm |
| Output voltage DC: | 24 V |
| Output current: | 6,5 A |
| Series: | HRP |
| AC input voltage: | 85~264 V |
| DC input voltage: | 120~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 156 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 540 g |
| Efficiency (typ.): | 88 % |
| Model series: | HRP-150N3 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 24 |
| Customs nomenclature: | 85044095 |
Files for download
| HRP-150N3-spec.pdf |
PDF, 171.58 kB |