HRP-100-5
Stock number: C004007
Manufacturer: MEANWELL
€44.54 incl. VAT €36.81 Excl. VAT
Product description
Detailed product description
The MEAN WELL HRP-100-5 is an industrial enclosed AC/DC switching power supply providing a single regulated 5V DC output, a rated current of 17A and 85W rated power. It belongs to the HRP-100 series, designed for reliable power delivery in industrial equipment, electronic systems and embedded applications. The supply operates with a constant-voltage (CV) output characteristic, making it suitable for control electronics, digital circuits, communication modules and other equipment requiring a stable 5V supply.
A key advantage of the HRP-100-5 is its wide input voltage range of 85–264V AC / 120–370V DC, supporting operation across different mains supplies. Integrated active power factor correction (PFC) improves input power utilisation, achieving a power factor above 0.95 at 230V AC under full load. Its 83% typical efficiency supports economical operation. The unit can also withstand a temporary 300V AC input surge for five seconds.
The output voltage can be adjusted using the integrated potentiometer over a range of 4.75–5.8V DC, allowing the supply to be configured for specific equipment requirements. The output current range is 0–17A, subject to the rated power and operating conditions. The supply provides 80mVp-p maximum ripple and noise, ±2.5% output voltage tolerance and ±2% load regulation, supporting reliable operation of digital electronics and industrial control systems.
The HRP-100-5 includes a remote ON/OFF control function through dedicated RC+ / RC− terminals. This allows an external controller to enable or disable the power supply, making it suitable for automated equipment and integrated power management systems. No-load power consumption below 0.5W helps reduce energy usage when equipment is idle.
The supply is housed in a compact metal enclosure with a low-profile 38mm height, suitable for integration into industrial equipment and control cabinets. Natural convection cooling enables quiet, fanless operation. The unit supports an ambient operating temperature range of −40 to +60°C, with load derating required under certain high-temperature and low-input-voltage conditions.
Integrated protection functions include short-circuit, overload and overvoltage protection. During overload conditions, the unit limits its output current and automatically recovers after the fault is removed. Overvoltage protection shuts down the output and requires an input power restart. The design uses long-life 105°C electrolytic capacitors to support dependable operation.
With 159 × 97 × 38mm dimensions, an approximate 560g weight, active PFC, adjustable output voltage and a five-year manufacturer's warranty, the MEAN WELL HRP-100-5 is a practical choice for professional 5V power distribution applications requiring up to 17A.
Key features
-
Device type: industrial enclosed AC/DC switching power supply
-
Manufacturer: MEAN WELL
-
Product series: HRP-100
-
Model: HRP-100-5
-
Output characteristic: constant voltage (CV)
-
Rated output voltage: 5V DC
-
Rated output current: 17A
-
Rated output power: 85W
-
Output current range: 0–17A
-
Adjustable output voltage: 4.75–5.8V DC
-
Number of outputs: 1
-
Output voltage tolerance: ±2.5%
-
Ripple and noise: 80mVp-p maximum
-
Line regulation: ±0.5%
-
Load regulation: ±2%
-
AC input voltage range: 85–264V AC
-
DC input voltage range: 120–370V DC
-
Input frequency: 47–63Hz
-
Typical efficiency: 83%
-
Power factor correction: active PFC
-
Power factor at full load: above 0.95 at 230V AC / above 0.98 at 115V AC
-
Typical AC input current: 1.1A at 115V AC / 0.6A at 230V AC
-
Typical inrush current: 35A at 115V AC / 65A at 230V AC
-
Temporary input surge withstand: 300V AC for five seconds
-
No-load power consumption: below 0.5W
-
Typical set-up time: 2,500ms
-
Typical rise time: 100ms
-
Typical hold-up time: 50ms at 230V AC / 20ms at 115V AC
-
Leakage current: below 1mA at 240V AC
-
Remote control: Remote ON/OFF
-
Remote control terminals: RC+ / RC−
-
Remote power ON: 0–0.8V
-
Remote power OFF: 4–10V
-
Protection functions: short circuit, overload and overvoltage
-
Overload protection threshold: 105–135% of rated output power
-
Overload protection mode: constant-current limiting with automatic recovery
-
Overvoltage protection threshold: 6–7V
-
Overvoltage recovery: input power restart required
-
Overtemperature protection: optional, depending on configuration
-
Input-to-output withstand voltage: 3kV AC
-
Input-to-earth withstand voltage: 2kV AC
-
Output-to-earth withstand voltage: 0.5kV AC
-
Insulation resistance: at least 100MΩ at 500V DC
-
Cooling: natural convection
-
Built-in fan: no
-
Ambient operating temperature: −40 to +60°C, subject to derating
-
Storage temperature: −40 to +85°C
-
Operating humidity: 20–90% RH, non-condensing
-
Vibration resistance: 5G
-
Safety standards: UL 62368-1, EN 62368-1
-
EMC standards: EN 55032 Class B, EN 61000-3-2/-3-3, EN 61000-6-2
-
Input connection: screw terminal block
-
Output connection: screw terminal block
-
Mounting: built-in, screw mounting
-
Enclosure: low-profile 1U metal housing
-
Dimensions: 159 × 97 × 38mm
-
Weight: approximately 560g
-
MTBF: at least 295,700 hours according to MIL-HDBK-217F at 25°C
-
Manufacturer's warranty: 5 years
Target applications
-
Industrial control and automation systems
-
5V electronic equipment and digital circuits
-
Embedded electronic systems and OEM equipment
-
Industrial computers and control units
-
Communication and networking equipment requiring 5V power
-
Measurement and test equipment
-
Electronic display and signalling systems
-
Industrial control cabinets and power distribution modules
-
Development and laboratory electronics
-
Custom electronic equipment requiring up to 17A
Parameters
Product parameters
| Description: | AC/DC power supply in a metal box |
| Operating temperature: | -40~60 °C |
| Dimensions: | 159x97x38 mm |
| Output voltage DC: | -5 V |
| Output current: | 17 A |
| Series: | HRP |
| AC input voltage: | 85~264 V |
| DC input voltage: | 120~370 V |
| Input frequency: | 47~63 Hz |
| Power of convertor: | 85 W |
| Number of outputs: | 1 |
| Isolation: | 3000 V |
| Weight: | 560 g |
| Efficiency (typ.): | 83 % |
| Model series: | HRP-100 |
Packaging and legislation
| Typ balení: | Box |
| Původ: | CN |
| Small packing quantity: | 24 |
| Customs nomenclature: | 85044095 |
Files for download
| HRP-100-spec.pdf |
PDF, 106.04 kB |