DCWN03E-12
Stock number: C007989
Manufacturer: MEANWELL
€7.68 incl. VAT €6.35 Excl. VAT
Product description
The MEAN WELL DCWN03E-12 is a compact isolated, regulated dual-output DC/DC converter designed for direct mounting on printed circuit boards. It converts an input voltage of 4.5–9V DC into two symmetrical output rails of +12V DC and −12V DC. Each rail delivers up to 125mA, with a combined rated output power of 3W. Its standard DIP24 package makes it suitable for industrial electronics, measurement equipment and analogue circuits requiring symmetrical power supplies.
Designed for a nominal 5V DC input, the converter offers a wide 2:1 input voltage range. Integrated 3,000V DC galvanic isolation between input and output provides electrical separation between different sections of the equipment. Regulated outputs with ±1.5% voltage accuracy support dependable operation of sensitive electronic circuits. A particular advantage is operation without a minimum load requirement, simplifying integration into applications with varying current demand.
The DCWN03E-12 achieves 80% typical efficiency, with maximum ripple and noise of 50mVp-p and a switching frequency of approximately 100kHz. Its integrated Pi-type input filter helps reduce conducted interference. The symmetrical outputs make the converter particularly suitable for operational amplifiers, analogue signal circuits, measurement converters and sensor modules.
Integrated protection features include short-circuit protection, overload protection and input undervoltage lockout (UVLO). Continuous short-circuit protection supports automatic recovery once the fault has been removed. The non-conductive plastic enclosure rated UL 94V-0 provides mechanical protection for the electronics. Natural convection cooling allows fanless operation.
The MEAN WELL DCWN03E-12 operates over an ambient temperature range of −40 to +90°C, subject to the manufacturer's derating curve. Its compact 31.8 × 20.3 × 10.2mm dimensions and approximate 12.3g weight simplify integration into electronic assemblies. With 3kV DC galvanic isolation, regulated outputs, a wide operating temperature range and a three-year manufacturer's warranty, it provides a practical solution for professional electronic applications.
Key features
-
Device type: isolated regulated DC/DC converter
-
Manufacturer: MEAN WELL
-
Product series: DCWN03
-
Rated power: 3W
-
Number of output rails: 2, symmetrical
-
Nominal input voltage: 5V DC
-
Input voltage range: 4.5–9V DC
-
Input range ratio: 2:1
-
Output voltage 1: +12V DC
-
Output voltage 2: −12V DC
-
Maximum positive rail current: 125mA
-
Maximum negative rail current: 125mA
-
Load range per rail: 0–125mA
-
Combined output power: 3W
-
Typical efficiency: 80%
-
Output voltage accuracy: ±1.5%
-
Line regulation: ±0.5%
-
Load regulation: ±1% for dual-output models
-
Ripple and noise: 50mVp-p maximum
-
Switching frequency: 100kHz
-
Galvanic isolation: input to output
-
Isolation withstand voltage: 3,000V DC
-
Isolation resistance: 100MΩ minimum
-
Isolation capacitance: 250pF
-
Input filter: Pi type
-
No-load input current: 25mA
-
Full-load input current: 750mA
-
Protection functions: short circuit, overload and input undervoltage
-
Overload protection threshold: 120–250% of rated power
-
Short-circuit protection: continuous, automatic recovery
-
Undervoltage lockout: integrated UVLO
-
Minimum load requirement: none
-
Cooling: natural convection
-
Operating temperature: −40 to +90°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Case material: non-conductive plastic
-
Case flammability rating: UL 94V-0
-
Package: DIP24 / DIL24
-
Mounting: through-hole PCB mounting
-
Dimensions: 31.8 × 20.3 × 10.2mm
-
Weight: approximately 12.3g
-
EMC: BS EN/EN 55032, Class A radiated emissions
-
Manufacturer's warranty: 3 years
Target applications
-
Industrial control and automation systems
-
Analogue and mixed-signal electronic circuits
-
Operational and instrumentation amplifiers
-
Test and measurement equipment
-
Sensor and signal conditioning circuits
-
Electronic circuits requiring symmetrical ±12V supplies
-
Industrial communication modules
-
Galvanically isolated power circuits
-
Embedded controllers and PCB modules
-
Professional and custom electronic equipment
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Case: | DIP-24 |
| Operating temperature: | -40~90 °C |
| Dimensions: | 31,8x20,3x10,2 mm |
| Output voltage DC: | -12 V |
| Output current: | 125 mA |
| Series: | DCWN |
| DC input voltage: | 4,5~9 V |
| Power of convertor: | 3 W |
| Number of outputs: | 2 |
| Isolation: | 3000 V |
| Weight: | 12,5 g |
| Efficiency (typ.): | 80 % |
| Model series: | DCWN03 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | CN |
| Small packing quantity: | 10 |
| Customs nomenclature: | 85044095 |
Files for download
| SCWN03,DCWN03-spec.pdf |
PDF, 117.94 kB |