DCW05C-15
Stock number: C007960
Manufacturer: MEANWELL
To order
To place an order, fill in the inquiry form and our sales team will contact you.
We will confirm the exact delivery date in our offer.
Product description
The MEAN WELL DCW05C-15 is a compact isolated and regulated DC/DC converter from the DCW05 series, delivering 5.7 W combined rated output power for industrial automation, measurement equipment, analogue circuits and embedded electronic systems. From a nominal 48 V DC input, it generates two symmetrical outputs of +15 V DC and −15 V DC, each rated at 190 mA. It provides regulated bipolar power for electronic circuits requiring both positive and negative supply rails. Its compact DIP24 package is designed for through-hole mounting directly onto a printed circuit board (PCB).
The converter supports a wide 36–72 V DC input range with a 2:1 input ratio, allowing operation in standard 48 V industrial and telecommunications power systems. Its regulated ±15 V outputs maintain stable supply voltages under changing input and load conditions. The manufacturer specifies ±2% output voltage accuracy, ±0.5% line regulation and ±0.5% load regulation. Maximum ripple and noise of 60 mVp-p support use in sensitive analogue and digital electronic applications. A typical efficiency of 85% contributes to efficient power conversion and reduced thermal losses.
A key advantage of the DCW05C-15 is its input-to-output galvanic isolation, with a withstand voltage of 1,000 V DC. This allows power domains to be separated and helps limit unwanted potential differences between different sections of equipment. The integrated Pi-type EMI input filter contributes to reduced electromagnetic interference, while the five-sided shielded metal enclosure supports electromagnetic compatibility when integrated into electronic assemblies. The symmetrical ±15 V supply is particularly suitable for operational amplifiers, instrumentation amplifiers, analogue filters, measurement circuits and signal conditioning systems.
The MEAN WELL DCW05C-15 incorporates short-circuit and overload protection. Overload protection operates at approximately 150–250% of rated output load, shutting down the outputs during a fault; operation is restored by cycling the input power. The converter supports an operating temperature range of −40 to +71°C, subject to derating, and uses natural convection cooling. The module measures 31.8 × 20.3 × 12.2 mm, weighs approximately 15 g and provides 2G vibration resistance. The manufacturer specifies electromagnetic emissions compliance with EN 55032 Class B and provides a 2-year warranty. Combining 5.7 W output power, regulated ±15 V outputs, a 36–72 V DC input range, 85% efficiency and 1 kV DC galvanic isolation, the DCW05C-15 is a suitable solution for industrial, measurement and telecommunications applications.
Key features
-
Product type: isolated regulated DC/DC converter
-
Manufacturer series: DCW05
-
Construction: encapsulated module with metal shielding
-
Number of outputs: 2, symmetrical
-
Combined rated output power: 5.7 W
-
Nominal input voltage: 48 V DC
-
Input voltage range: 36–72 V DC
-
Input voltage ratio: 2:1
-
Output voltage 1: +15 V DC
-
Output voltage 2: −15 V DC
-
Symmetrical output voltage: ±15 V DC
-
Rated output current 1: 190 mA
-
Rated output current 2: 190 mA
-
Load range per output: 38–190 mA
-
Output regulation: regulated converter
-
Output voltage accuracy: ±2%
-
Line regulation: ±0.5%
-
Load regulation: ±0.5%
-
Ripple and noise: 60 mVp-p maximum
-
Typical efficiency: 85%
-
Switching frequency: 50 kHz minimum
-
Typical full-load input current: 139 mA
-
Typical no-load input current: 12 mA
-
Input EMI filter: Pi type
-
Galvanic isolation: yes
-
Input-to-output withstand voltage: 1,000 V DC
-
Isolation resistance: 100 MΩ at 500 V DC
-
Isolation capacitance: 80 pF maximum
-
Protection functions: short circuit, overload
-
Overload protection threshold: 150–250% of rated output load
-
Protection mode: output shutdown, recovery after input power cycling
-
Cooling method: natural convection
-
Operating temperature: −40 to +71°C, subject to derating
-
Operating humidity: 20–90% RH, non-condensing
-
Storage temperature: −40 to +105°C
-
Temperature coefficient: ±0.03%/°C
-
Vibration resistance: 2G
-
Mounting type: through-hole (THT)
-
Package: DIP24
-
Number of populated pins: 8
-
Pin configuration: 2 and 3 −Vin; 9 COM; 11 −Vout; 14 +Vout; 16 COM; 22 and 23 +Vin
-
Enclosure material: five-sided shielded metal case
-
Dimensions: 31.8 × 20.3 × 12.2 mm
-
Approximate weight: 15 g
-
EMC emissions: EN 55032 Class B; FCC Part 15 Class B
-
Manufacturer's warranty: 2 years
Target applications
-
Industrial control systems and automation
-
Galvanically isolated power supplies for electronic circuits
-
Operational amplifiers requiring symmetrical ±15 V rails
-
Instrumentation amplifiers and precision measurement systems
-
Analogue filters and signal conditioning circuits
-
Sensor and communication interfaces
-
Embedded electronics with a 48 V DC supply
-
Telecommunications and data equipment
-
Measurement, testing and laboratory instruments
-
OEM manufacturing of industrial and electronic equipment
Parameters
Product parameters
| Description: | DC/DC converter regulated |
| Case: | DIP-24 |
| Operating temperature: | -40~71 °C |
| Dimensions: | 31,8x20,3x12,2 mm |
| Output voltage DC: | -15 V |
| Output current: | 190 mA |
| Series: | DCW |
| DC input voltage: | 36~72 V |
| Power of convertor: | 5,7 W |
| Number of outputs: | 2 |
| Isolation: | 1000 V |
| Weight: | 15 g |
| Efficiency (typ.): | 85 % |
| Model series: | DCW05 |
Packaging and legislation
| Typ balení: | Tube |
| Původ: | TW |
| Customs nomenclature: | 85044095 |
Files for download
| DCW05-spec.pdf |
PDF, 59.04 kB |