The AWG24 8-core flat cable is designed for organised internal wiring of electronic equipment, devices and assemblies. Eight parallel conductors are individually colour-coded, simplifying circuit identification during electronics manufacturing, assembly and servicing.
Each core is AWG24 and consists of 11 strands with a diameter of 0.16 mm. The stranded construction provides good flexibility and facilitates cable processing and installation. Each conductor features PVC insulation with a nominal thickness of 0.4 mm and a minimum thickness of 0.36 mm. The overall diameter of each insulated core is approximately 1.4 mm.
The cable contains 8 colour-coded cores – red, orange, yellow, green, blue, purple, grey and white. Its flat construction with a 1.4 mm pitch enables multiple electrical connections to be routed in parallel within a compact cable. The overall width of the 8-core version is approximately 11.2 mm.
The cable is rated for 300 V and a rated temperature of 80 °C. It meets the VW-1/FT-1 flame test requirements and its construction references UL 758, UL 1581, CSA C22.2 No. 210.2 and IEC 60754-2 standards. It is primarily intended for internal wiring of electrical and electronic equipment.
Key features
- Type: flat multi-core cable
- Number of cores: 8
- Wire size: AWG24
- Conductor construction: 11×0.16 mm
- Conductor pitch: 1.4 mm
- Insulation: PVC
- Insulation thickness: 0.4 mm
- Insulated core diameter: 1.4 mm
- Overall cable width: approx. 11.2 mm
- Core colours: red, orange, yellow, green, blue, purple, grey, white
- Rated voltage: 300 V
- Rated temperature: 80 °C
- DC resistance at 20 °C: 94.2 Ω/km
- Dielectric strength: 2.0 kV/min
- Flame test: VW-1/FT-1
- Certification: UL
- Reference standards: UL 758, UL 1581, CSA C22.2 No. 210.2, IEC 60754-2
Target applications
- internal wiring of electronic equipment
- electronics and equipment wiring
- control and signal circuits
- interconnection of electronic modules and boards
- cable assembly manufacturing
- industrial electronics
- consumer electronics
- electronic prototyping and development